staging.inyokaproject.org

berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ nmap 192.168.150.* 

Starting Nmap 7.01 ( https://nmap.org ) at 2018-08-29 22:39 CEST
Nmap done: 256 IP addresses (0 hosts up) scanned in 104.22 seconds
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ nmap 192.168.178.*

Starting Nmap 7.01 ( https://nmap.org ) at 2018-08-29 22:42 CEST
Nmap scan report for fritz.box (192.168.178.1)
Host is up (0.0066s latency).
Not shown: 990 closed ports
PORT     STATE SERVICE
21/tcp   open  ftp
53/tcp   open  domain
80/tcp   open  http
139/tcp  open  netbios-ssn
443/tcp  open  https
445/tcp  open  microsoft-ds
554/tcp  open  rtsp
5060/tcp open  sip
8089/tcp open  unknown
8181/tcp open  unknown

Nmap scan report for berni-Invalid-entry-length-16-Fixed-up-to-11-P6630.fritz.box (192.168.178.20)
Host is up (0.000093s latency).
All 1000 scanned ports on berni-Invalid-entry-length-16-Fixed-up-to-11-P6630.fritz.box (192.168.178.20) are closed

Nmap scan report for BRW1008B19CED18.fritz.box (192.168.178.22)
Host is up (0.018s latency).
Not shown: 993 closed ports
PORT     STATE SERVICE
21/tcp   open  ftp
23/tcp   open  telnet
80/tcp   open  http
443/tcp  open  https
515/tcp  open  printer
631/tcp  open  ipp
9100/tcp open  jetdirect

Nmap done: 256 IP addresses (3 hosts up) scanned in 7.89 seconds
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ 

berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ brsaneconfig4 -a name=SCANNER model=DCP-L2560DW ip=192.168.178.022
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ /opt/brother/scanner/brscan4/brsaneconfig4 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=8f19ac87-da5e-4e64-b5b6-13fee2a40e6b /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=4af59310-08d5-438e-9709-86619b490fc4 none            swap    sw              0       0
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x046d/0xc521 at 002:005: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0608 at 002:004: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0608 at 002:003: Access denied (insufficient permissions)
could not open USB device 0x8087/0x0020 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x8087/0x0020 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: cannot access '/proc/bus/usb': No such file or directory
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: No such file or directory
-----------------------------
scanimage -L
device `brother4:net1;dev1' is a Brother berni DCP-L2560DW
device `brother4:net1;dev0' is a Brother SCANNER DCP-L2560DW
-----------------------------
-----------------------------
/etc/opt/brother/scanner/brscan4//brsanenetdevice4.cfg:
-----------------------------
/etc/opt/brother/scanner/brscan4//Brsane4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_7.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_15.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_18.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_6.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_16.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_2.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_21.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_3.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_12.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_4.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_17.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_1.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_11.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_14.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_10.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_20.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_13.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_5.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_8.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_9.ini:
-----------------------------
/etc/opt/brother/scanner/brscan4//models4/ext_19.ini:
-----------------------------
-----------------------------
ping
test berni
ping 192.168.10.33 -w 10

PING 192.168.10.33 (192.168.10.33) 56(84) bytes of data.

--- 192.168.10.33 ping statistics ---
10 packets transmitted, 0 received, 100% packet loss, time 9207ms

test SCANNER
ping 192.168.178.022 -w 10

PING 192.168.178.022 (192.168.178.18) 56(84) bytes of data.
From 192.168.178.20 icmp_seq=1 Destination Host Unreachable
From 192.168.178.20 icmp_seq=2 Destination Host Unreachable
From 192.168.178.20 icmp_seq=3 Destination Host Unreachable

--- 192.168.178.022 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2052ms
pipe 3
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ 

berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ scanimage --device brother4:net1;dev1 --format=ppm >test.ppm
scanimage: open of device brother4:net1 failed: Invalid argument
dev1: command not found
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ scanimage --device brother4:net1;dev0 --format=ppm >test.ppm
scanimage: open of device brother4:net1 failed: Invalid argument
dev0: command not found
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ 

berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ cat /etc/sane.d/net.conf
# This is the net backend config file.

## net backend options
# Timeout for the initial connection to saned. This will prevent the backend
# from blocking for several minutes trying to connect to an unresponsive
# saned host (network outage, host down, ...). Value in seconds.
# connect_timeout = 60

## saned hosts
# Each line names a host to attach to.
# If you list "localhost" then your backends can be accessed either
# directly or through the net backend.  Going through the net backend
# may be necessary to access devices that need special privileges.
# localhost
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ 

berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ cat /opt/brother/scanner/brscan4/brsanenetdevice4.cfg
DEVICE=SCANNER , "DCP-L2560DW" , 0x4f9:0x329 , IP-ADDRESS=192.168.178.022 
DEVICE=berni , "DCP-L2560DW" , 0x4f9:0x329 , IP-ADDRESS=192.168.10.33 

berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ 

berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ brsaneconfig4 -r SCANNER
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ brsaneconfig4 -r berni
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ brsaneconfig4 -a name=SCANNER model=DCP-L2560DW ip=192.168.178.22
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$ /opt/brother/scanner/brscan4/brsaneconfig4 -p
test SCANNER
ping 192.168.178.22 -w 10

PING 192.168.178.22 (192.168.178.22) 56(84) bytes of data.
64 bytes from 192.168.178.22: icmp_seq=1 ttl=255 time=254 ms
64 bytes from 192.168.178.22: icmp_seq=2 ttl=255 time=8.04 ms
64 bytes from 192.168.178.22: icmp_seq=3 ttl=255 time=3.11 ms
64 bytes from 192.168.178.22: icmp_seq=4 ttl=255 time=2.79 ms
64 bytes from 192.168.178.22: icmp_seq=5 ttl=255 time=2.79 ms
64 bytes from 192.168.178.22: icmp_seq=6 ttl=255 time=98.2 ms
64 bytes from 192.168.178.22: icmp_seq=7 ttl=255 time=3.51 ms
64 bytes from 192.168.178.22: icmp_seq=8 ttl=255 time=2.88 ms
64 bytes from 192.168.178.22: icmp_seq=9 ttl=255 time=3.25 ms
64 bytes from 192.168.178.22: icmp_seq=10 ttl=255 time=3.32 ms

--- 192.168.178.22 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9013ms
rtt min/avg/max/mdev = 2.797/38.272/254.701/77.471 ms
berni@berni-Invalid-entry-length-16-Fixed-up-to-11-P6630:~$