staging.inyokaproject.org

Hi Kellerkind_2009,

wird gemacht:

august@August-Ryzen:~$ sudo adduser $USER scanner
[sudo] Passwort für august: 
Der Benutzer »august« ist bereits ein Mitglied der Gruppe »scanner«.
august@August-Ryzen:~$ sudo adduser $USER lp
Benutzer »august« wird der Gruppe »lp« hinzugefügt …
Benutzer august wird zur Gruppe lp hinzugefügt.
Fertig.
august@August-Ryzen:~$ sudo mkdir -p /var/spool/lpd 
august@August-Ryzen:~$ sudo mkdir -p /usr/share/cups/model
august@August-Ryzen:~$ sudo mkdir -p /usr/lib/sane
august@August-Ryzen:~$ sudo apt-get update && sudo apt-get install cups csh lib32z1 lib32ncurses5 libusb-0.1-4

Die Ausgabe von install habe ich hier mal weggelassen (es sah nicht nach einem Fehler aus).

august@August-Ryzen:~$ mkdir -p ~/Brother-DCP-7010
august@August-Ryzen:~$ cd ~/Brother-DCP-7010
august@August-Ryzen:~/Brother-DCP-7010$ wget http://download.brother.com/welcome/dlf006654/brother-udev-rule-type1-1.0.2-0.all.deb
--2018-06-13 11:26:01--  http://download.brother.com/welcome/dlf006654/brother-udev-rule-type1-1.0.2-0.all.deb
Auflösen des Hostnamens download.brother.com (download.brother.com)… 2.19.105.246
Verbindungsaufbau zu download.brother.com (download.brother.com)|2.19.105.246|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 1558 (1,5K) [image/x-deb]
Wird in »brother-udev-rule-type1-1.0.2-0.all.deb« gespeichert.

brother-udev-rule-type1-1.0.2-0.all.d 100%[=======================================================================>]   1,52K  --.-KB/s    in 0s      

2018-06-13 11:26:01 (127 MB/s) - »brother-udev-rule-type1-1.0.2-0.all.deb« gespeichert [1558/1558]

august@August-Ryzen:~/Brother-DCP-7010$ wget http://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.0-1.gz
--2018-06-13 11:26:15--  http://download.brother.com/welcome/dlf006893/linux-brprinter-installer-2.2.0-1.gz
Auflösen des Hostnamens download.brother.com (download.brother.com)… 2.19.105.246
Verbindungsaufbau zu download.brother.com (download.brother.com)|2.19.105.246|:80 … verbunden.
HTTP-Anforderung gesendet, auf Antwort wird gewartet … 200 OK
Länge: 24666 (24K) [application/x-gzip]
Wird in »linux-brprinter-installer-2.2.0-1.gz« gespeichert.

linux-brprinter-installer-2.2.0-1.gz  100%[=======================================================================>]  24,09K  --.-KB/s    in 0s      

2018-06-13 11:26:15 (276 MB/s) - »linux-brprinter-installer-2.2.0-1.gz« gespeichert [24666/24666]

august@August-Ryzen:~/Brother-DCP-7010$ gunzip linux-brprinter-installer-*.*.*-*.gz
august@August-Ryzen:~/Brother-DCP-7010$ sudo bash linux-brprinter-installer-2.2.0-1 DCP-7010
You are going to install following packages.

Auch hier habe ich die folgenden Ausgaben weggelassen.

august@August-Ryzen:~/Brother-DCP-7010$ sudo dpkg -i brother-udev-rule-type1-1.0.2-0.all.deb
dpkg: Warnung: Dateilisten-Datei des Paketes »brother-udev-rule-type1« fehlt; es wird angenommen,
 dass das Paket derzeit keine Dateien installiert hat
(Lese Datenbank ... 186599 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von brother-udev-rule-type1-1.0.2-0.all.deb ...
Entpacken von brother-udev-rule-type1 (1.0.2) über (1.0.2) ...
brother-udev-rule-type1 (1.0.2) wird eingerichtet ...
august@August-Ryzen:~/Brother-DCP-7010$ sudo ln -sf /usr/lib64/sane/libsane-brother2* /usr/lib/sane
august@August-Ryzen:~/Brother-DCP-7010$ sudo ln -sf /usr/lib64/sane/libsane-brother2* /usr/lib/x86_64-linux-gnu/sane
august@August-Ryzen:~/Brother-DCP-7010$ sudo ln -sf /usr/lib64/libbrcolm2* /usr/lib
august@August-Ryzen:~/Brother-DCP-7010$ sudo ln -sf /usr/lib64/libbrscandec2* /usr/lib
august@August-Ryzen:~/Brother-DCP-7010$ 

Status ist:

• ich habe 2 Drucker, der Drucker druckt

• Scanvorgang konnte nicht gestartet werden

Schönen Gruß AugustQ

moin,

@ AugustQ: kannst Du folgendes mal ausführen und das Ergebnis hier zeigen...

export SANE_DEBUG_DLL=255 && scanimage -L

Hi Ubu-tester,

wird gemacht:

august@August-Ryzen:~$ export SANE_DEBUG_DLL=255 && scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.27
[dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `canon_dr'
[dll] add_backend: adding backend `cardscan'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan3'
[dll] add_backend: adding backend `dell1600n_net'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epjitsu'
[dll] add_backend: adding backend `epson2'
[dll] add_backend: adding backend `epsonds'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `genesys'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hp3900'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp3500'
[dll] add_backend: adding backend `hp4200'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `hp5590'
[dll] add_backend: adding backend `hpljm1005'
[dll] add_backend: adding backend `hs2p'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `kodak'
[dll] add_backend: adding backend `kodakaio'
[dll] add_backend: adding backend `kvs1025'
[dll] add_backend: adding backend `kvs20xx'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `lexmark'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `magicolor'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `mustek_usb2'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `niash'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `pixma'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `rts8891'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `sm3840'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `u12'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `xerox_mfp'
[dll] add_backend: adding backend `brother2'
[dll] add_backend: adding backend `brother2'
[dll] add_backend: `brother2' is already there
[dll] sane_get_devices
[dll] load: searching backend `brother2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-brother2.so.1'
[dll] init: initializing backend `brother2'
[dll] init: backend `brother2' is version 1.0.1
[dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[dll] init: initializing backend `xerox_mfp'
[dll] init: backend `xerox_mfp' is version 1.0.13
[dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[dll] load: couldn't find backend `v4l' (No such file or directory)
[dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.2
[dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.45
[dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[dll] init: initializing backend `u12'
[dll] init: backend `u12' is version 1.0.0
[dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.10
[dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.10
[dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.53
[dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[dll] init: initializing backend `sm3840'
[dll] init: backend `sm3840' is version 1.0.0
[dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.6
[dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[dll] init: initializing backend `rts8891'
[dll] init: backend `rts8891' is version 1.0.2401
[dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[dll] init: initializing backend `pixma'
[dll] init: backend `pixma' is version 1.0.17
[dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[dll] init: initializing backend `niash'
[dll] init: backend `niash' is version 1.0.1
[dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[dll] init: initializing backend `mustek_usb2'
[dll] init: backend `mustek_usb2' is version 1.0.10
[dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.18
[dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.138
[dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.7
[dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[dll] init: initializing backend `magicolor'
[dll] init: backend `magicolor' is version 1.0.1
[dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[dll] init: initializing backend `lexmark'
[dll] init: backend `lexmark' is version 1.0.32
[dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.11
[dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[dll] init: initializing backend `kvs20xx'
[dll] init: backend `kvs20xx' is version 1.0.2
[dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[dll] init: initializing backend `kvs1025'
[dll] init: backend `kvs1025' is version 1.0.5
[dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[dll] init: initializing backend `kodakaio'
[dll] init: backend `kodakaio' is version 1.0.3
[dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[dll] init: initializing backend `kodak'
[dll] init: backend `kodak' is version 1.0.7
[dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[dll] init: initializing backend `hs2p'
[dll] init: backend `hs2p' is version 1.0.0
[dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[dll] init: initializing backend `hpljm1005'
[dll] init: backend `hpljm1005' is version 1.0.1
[dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[dll] init: initializing backend `hp5590'
[dll] init: backend `hp5590' is version 1.0.7
[dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[dll] init: initializing backend `hp4200'
[dll] init: backend `hp4200' is version 1.0.0
[dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[dll] init: initializing backend `hp3500'
[dll] init: backend `hp3500' is version 1.0.0
[dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[dll] init: initializing backend `hp3900'
[dll] init: backend `hp3900' is version 1.0.0
[dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.84
[dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[dll] init: initializing backend `genesys'
[dll] init: backend `genesys' is version 1.0.2511
[dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.133
[dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[dll] init: initializing backend `epsonds'
[dll] init: backend `epsonds' is version 1.0.0
[dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[dll] init: initializing backend `epson2'
[dll] init: backend `epson2' is version 1.0.124
[dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[dll] init: initializing backend `epjitsu'
[dll] init: backend `epjitsu' is version 1.0.31
[dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[dll] init: initializing backend `dell1600n_net'
[dll] init: backend `dell1600n_net' is version 1.0.0
[dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[dll] init: initializing backend `coolscan3'
[dll] init: backend `coolscan3' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[dll] init: initializing backend `cardscan'
[dll] init: backend `cardscan' is version 1.0.3
[dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[dll] init: initializing backend `canon_dr'
[dll] init: backend `canon_dr' is version 1.0.56
[dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.297
[dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.27
[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane'
[dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.0
[dll] sane_get_devices: found 1 devices
device `brother2:bus4;dev1' is a Brother DCP-7010 USB scanner
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `brother2's exit function
[dll] sane_exit: calling backend `xerox_mfp's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `u12's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3840's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `rts8891's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pixma's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `niash's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb2's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `magicolor's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `lexmark's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `kvs20xx's exit function
[dll] sane_exit: calling backend `kvs1025's exit function
[dll] sane_exit: calling backend `kodakaio's exit function
[dll] sane_exit: calling backend `kodak's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hs2p's exit function
[dll] sane_exit: calling backend `hpljm1005's exit function
[dll] sane_exit: calling backend `hp5590's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hp4200's exit function
[dll] sane_exit: calling backend `hp3500's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp3900's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `genesys's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epsonds's exit function
[dll] sane_exit: calling backend `epson2's exit function
[dll] sane_exit: calling backend `epjitsu's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `dell1600n_net's exit function
[dll] sane_exit: calling backend `coolscan3's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `cardscan's exit function
[dll] sane_exit: calling backend `canon_dr's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
august@August-Ryzen:~$ 

Oh, das hatte ich noch nicht.

Schönen Gruß AugustQ

Gerät ist ja jetzt vorhanden

device `brother2:bus4;dev1' is a Brother DCP-7010 USB scanner

mal vom USB abklemmen,Neustart und wieder anstecken und Scannen.Bei Fehlern zeige

id

sudo sane-find-scanner

und

sane-find-scanner -v -v

Hi Kellerkind_2009,

Schritt #1:

august@August-Ryzen:~$ id
uid=1000(august) gid=1000(august) Gruppen=1000(august),4(adm),7(lp),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),118(scanner),126(sambashare)
august@August-Ryzen:~$ 

Schritt 2:

august@August-Ryzen:~$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04f9, product=0x0182) at libusb:001:007
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
august@August-Ryzen:~$ 

Schritt 3:

august@August-Ryzen:~$ sane-find-scanner -v -v
This is sane-find-scanner from sane-backends 1.0.27

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Access to resource has been denied)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Access to resource has been denied)
checking /dev/sg3... failed to open (Access to resource has been denied)
checking /dev/sg4... failed to open (Access to resource has been denied)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
trying libusb:
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x062a/0x0000 at 001:006: Access denied (insufficient permissions)
could not open USB device 0x1ea7/0x0066 at 001:005: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0608 at 001:003: Access denied (insufficient permissions)

<device descriptor of 0x04f9/0x0182 at 001:007>
bLength               18
bDescriptorType       1
bcdUSB                1.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x04F9
idProduct             0x0182
bcdDevice             1.00
iManufacturer         0 ()
iProduct              0 ()
iSerialNumber         3 (000L5J308743)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         62
 bNumInterfaces       2
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             2 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      2
   bInterfaceClass    7
   bInterfaceSubClass 1
   bInterfaceProtocol 2
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x01 (out 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x82 (in 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    16
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
  <interface 1>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   1
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x03 (out 0x03)
    bmAttributes      2 (bulk)
    wMaxPacketSize    16
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x84 (in 0x04)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x85 (in 0x05)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    8
    bInterval         100 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
could not claim USB device interface
found USB scanner (vendor=0x04f9, product=0x0182) at libusb:001:007
could not open USB device 0x8087/0x0a2a at 001:002: Access denied (insufficient permissions)
could not open USB device 0x058f/0x6366 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
done
august@August-Ryzen:~$ 

Ach ja: Status ist wie gehabt

Schönen Gruß

AugustQ

Das ist seltsam!Er wird mit und ohne sudo erkannt und Scannt nicht?? Einmal Testen und die Ausgabe von

xscanimage

Hi Kellerkind_2009,

erst musste ich das Paket sane installieren, denn das Kommando kannte der PC nicht (mehr).

Das erhielt ich:

august@August-Ryzen:~$ xscanimage
Gtk-Message: 17:50:01.852: Failed to load module "canberra-gtk-module"
august@August-Ryzen:~$ 

Angehängt habe ich noch einen Dialog, den ich auch erhielt.

Schönen Gruß AugustQ

So langsam weiß ich nicht mehr warum es bei dir nicht Funktioniert ☹ Zeige mal

brsaneconfig2 -d

moin,

der Befehl ist anstelle von 'xscanimage' = "scanimage" ohne 'x'

veruch es mal.

Hi Ubu-tester,

das erhielt ich:

august@August-Ryzen:~$ scanimage >x.x
scanimage: open of device brother2:bus4;dev1 failed: Invalid argument
august@August-Ryzen:~$ ls -l x.x
-rw-r--r-- 1 august august 0 Jun 14 10:13 x.x
august@August-Ryzen:~$ 

Schönen Gruß AugustQ

Hi Kellerkind_2009,

das erhielt ich:

august@August-Ryzen:~$ brsaneconfig2 -d
-----------------------------
cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdc1 during installation
UUID=9470aaaa-63ff-45d4-8458-6d2fa5d6e822 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sde1 during installation
UUID=1EC8-2575  /boot/efi       vfat    umask=0077      0       1
# /home was on /dev/sda1 during installation
UUID=bf35c7cc-554d-4180-8845-3ef5dd7e277f /home           ext4    defaults        0       2
/swapfile                                 none            swap    sw              0       0
-----------------------------
sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
found USB scanner (vendor=0x04f9, product=0x0182) at libusb:003:005
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x062a/0x0000 at 001:010: Access denied (insufficient permissions)
could not open USB device 0x1ea7/0x0066 at 001:009: Access denied (insufficient permissions)
could not open USB device 0x05e3/0x0608 at 001:008: Access denied (insufficient permissions)
could not open USB device 0x8087/0x0a2a at 001:002: Access denied (insufficient permissions)
could not open USB device 0x058f/0x6366 at 001:004: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
-----------------------------
ls -R -all /proc/bus/usb
ls: Zugriff auf '/proc/bus/usb' nicht möglich: Datei oder Verzeichnis nicht gefunden
-----------------------------
cat /proc/bus/usb/devices
cat: /proc/bus/usb/devices: Datei oder Verzeichnis nicht gefunden
-----------------------------
scanimage -L
device `brother2:bus2;dev1' is a Brother DCP-7010 USB scanner
-----------------------------
-----------------------------
/usr/local/Brother/sane/brsanenetdevice2.cfg:

-----------------------------
/usr/local/Brother/sane/Brsane2.ini:
[Support Model]
0x0161,10,1,"MFC-210C"
0x0162,12,1,"MFC-420CN"
0x0163,10,1,"MFC-410CN"
0x0165,12,1,"MFC-620CN"
0x0166,10,1,"MFC-610CLN"
0x0168,10,1,"MFC-620CLN"
0x0169,10,2,"DCP-110C"
0x016b,10,2,"DCP-310CN"
0x016d,12,1,"MFC-5440CN"
0x016e,12,1,"MFC-5840CN"
0x0173,11,1,"MFC-3240C"
0x0174,11,1,"MFC-3340CN"

0x0180, 6,1,"MFC-7420"
0x0181, 6,1,"MFC-7820N"
0x0182, 7,2,"DCP-7010"
0x0183, 6,2,"DCP-7020"
0x0184, 6,2,"DCP-7025"
0x0185, 5,1,"MFC-7220"
0x0186, 5,1,"MFC-7225N"

0x018a, 16,1,"MFC-9420CN"

0x1a3,  8,2, "DCP-8060"
0x1a4,108,2, "DCP-8065DN"
0x1a5,  8,1, "MFC-8460N"
0x1a6,108,1, "MFC-8860DN"
0x1a7,108,1, "MFC-8870DW"
0x1bd,  8,1, "MFC-8660DN"

0x018c,10,2,"DCP-115C"
0x018d,10,2,"DCP-116C"
0x018e,10,2,"DCP-117C"
0x018f,10,2,"DCP-118C"
0x0190,12,2,"DCP-120C"
0x0191,10,2,"DCP-315CN"
0x0192,12,2,"DCP-340CW"
0x0193,10,1,"MFC-215C"
0x0194,12,1,"MFC-425CN"
0x0195,12,1,"MFC-820CW"
0x0196,12,1,"MFC-820CN"
0x0197,12,1,"MFC-640CW"
0x0198,10,1,"MFC-615CL"
0x0199,10,1,"MFC-830CLN"
0x019a,12,1,"MFC-840CLN"

0x01a8,10,2,"DCP-130C"
0x01a9,10,2,"DCP-330C"
0x01aa,12,2,"DCP-540CN"
0x01ab,12,1,"MFC-240C"
0x01ae,10,2,"DCP-750CW"
0x01af,12,1,"MFC-440CN"
0x01b0,12,1,"MFC-660CN"
0x01b1,12,1,"MFC-665CW"
0x01b2,12,1,"MFC-845CW"
0x01b4,12,1,"MFC-460CN"
0x01b5,10,1,"MFC-630CD"
0x01b6,10,1,"MFC-850CDN"
0x01b7,12,1,"MFC-5460CN"
0x01b8,12,1,"MFC-5860CN"
0x01ba,11,1,"MFC-3360C"
0x01be,10,2,"DCP-750CN"
0x01bf,12,1,"MFC-860CDN"

[ModelTypeName]
1=MFC Scanner
2=DCP Scanner

[Driver]
scanfast24=0
NoUseCM=0
compression=1
Inqueue=32000
LogFile=0

-----------------------------
/usr/local/Brother/sane/models2/ext2.ini:
[Support Model]
0x020d ,16,1,"MFC-9450CDN"
0x020c ,16,2,"DCP-9042CDN"

0x20a ,108,1, "MFC-8670DN"
-----------------------------
/usr/local/Brother/sane/models2/ext1.ini:
[Support Model]
0x01c9,  16,2,"DCP-9040CN"
0x01ca,  16,1,"MFC-9440CN"
0x01cb, 116,2,"DCP-9045CDN"
0x01cc, 116,1,"MFC-9840CDW"
0x01ec, 116,1,"MFC-9640CW"



0x01e4, 10,2,"DCP-357C"
0x01e3, 10,2,"DCP-353C"
0x01e2, 10,2,"DCP-157C"
0x01e1, 10,2,"DCP-153C"
0x01e0, 12,1,"MFC-265C"
0x01df, 10,2,"DCP-155C"
0x01de, 12,1,"MFC-880CDN"
0x01dd, 10,1,"MFC-870CDN"
0x01dc, 10,1,"MFC-650CD"
0x01db, 12,1,"MFC-480CN"
0x01da, 12,1,"MFC-885CW"
0x01d9, 12,1,"MFC-685CW"
0x01d8, 12,1,"MFC-680CN"
0x01d7, 12,1,"MFC-465CN"
0x01d6, 12,1,"MFC-260C"
0x01d5, 10,1,"MFC-235C"
0x01d4, 10,1,"MFC-230C"
0x01d3, 10,2,"DCP-770CN"
0x01d2, 10,2,"DCP-770CW"
0x01d1, 12,2,"DCP-560CN"
0x01d0, 10,2,"DCP-350C"
0x01cf, 10,2,"DCP-150C"
0x01ce, 10,2,"DCP-135C"

-----------------------------
MODEL:"MFC-9450CDN",ID:0x4f9:0x20d,TYPE:16,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-9042CDN",ID:0x4f9:0x20c,TYPE:16,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-8670DN",ID:0x4f9:0x20a,TYPE:8,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-9040CN",ID:0x4f9:0x1c9,TYPE:16,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9440CN",ID:0x4f9:0x1ca,TYPE:16,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-9045CDN",ID:0x4f9:0x1cb,TYPE:16,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9840CDW",ID:0x4f9:0x1cc,TYPE:16,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9640CW",ID:0x4f9:0x1ec,TYPE:16,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-357C",ID:0x4f9:0x1e4,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-353C",ID:0x4f9:0x1e3,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-157C",ID:0x4f9:0x1e2,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-153C",ID:0x4f9:0x1e1,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-265C",ID:0x4f9:0x1e0,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-155C",ID:0x4f9:0x1df,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-880CDN",ID:0x4f9:0x1de,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-870CDN",ID:0x4f9:0x1dd,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-650CD",ID:0x4f9:0x1dc,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-480CN",ID:0x4f9:0x1db,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-885CW",ID:0x4f9:0x1da,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-685CW",ID:0x4f9:0x1d9,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-680CN",ID:0x4f9:0x1d8,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-465CN",ID:0x4f9:0x1d7,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-260C",ID:0x4f9:0x1d6,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-235C",ID:0x4f9:0x1d5,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-230C",ID:0x4f9:0x1d4,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-770CN",ID:0x4f9:0x1d3,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-770CW",ID:0x4f9:0x1d2,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-560CN",ID:0x4f9:0x1d1,TYPE:12,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-350C",ID:0x4f9:0x1d0,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-150C",ID:0x4f9:0x1cf,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-135C",ID:0x4f9:0x1ce,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-210C",ID:0x4f9:0x161,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-420CN",ID:0x4f9:0x162,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-410CN",ID:0x4f9:0x163,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-620CN",ID:0x4f9:0x165,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-610CLN",ID:0x4f9:0x166,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-620CLN",ID:0x4f9:0x168,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-110C",ID:0x4f9:0x169,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-310CN",ID:0x4f9:0x16b,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5440CN",ID:0x4f9:0x16d,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5840CN",ID:0x4f9:0x16e,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-3240C",ID:0x4f9:0x173,TYPE:11,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-3340CN",ID:0x4f9:0x174,TYPE:11,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-7420",ID:0x4f9:0x180,TYPE:6,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-7820N",ID:0x4f9:0x181,TYPE:6,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-7010",ID:0x4f9:0x182,TYPE:7,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-7020",ID:0x4f9:0x183,TYPE:6,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-7025",ID:0x4f9:0x184,TYPE:6,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-7220",ID:0x4f9:0x185,TYPE:5,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-7225N",ID:0x4f9:0x186,TYPE:5,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-9420CN",ID:0x4f9:0x18a,TYPE:16,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-8060",ID:0x4f9:0x1a3,TYPE:8,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-8065DN",ID:0x4f9:0x1a4,TYPE:8,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-8460N",ID:0x4f9:0x1a5,TYPE:8,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-8860DN",ID:0x4f9:0x1a6,TYPE:8,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-8870DW",ID:0x4f9:0x1a7,TYPE:8,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-8660DN",ID:0x4f9:0x1bd,TYPE:8,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-115C",ID:0x4f9:0x18c,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-116C",ID:0x4f9:0x18d,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-117C",ID:0x4f9:0x18e,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-118C",ID:0x4f9:0x18f,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-120C",ID:0x4f9:0x190,TYPE:12,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-315CN",ID:0x4f9:0x191,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-340CW",ID:0x4f9:0x192,TYPE:12,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-215C",ID:0x4f9:0x193,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-425CN",ID:0x4f9:0x194,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-820CW",ID:0x4f9:0x195,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-820CN",ID:0x4f9:0x196,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-640CW",ID:0x4f9:0x197,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-615CL",ID:0x4f9:0x198,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-830CLN",ID:0x4f9:0x199,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-840CLN",ID:0x4f9:0x19a,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-130C",ID:0x4f9:0x1a8,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-330C",ID:0x4f9:0x1a9,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-540CN",ID:0x4f9:0x1aa,TYPE:12,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-240C",ID:0x4f9:0x1ab,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-750CW",ID:0x4f9:0x1ae,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-440CN",ID:0x4f9:0x1af,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-660CN",ID:0x4f9:0x1b0,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-665CW",ID:0x4f9:0x1b1,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-845CW",ID:0x4f9:0x1b2,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-460CN",ID:0x4f9:0x1b4,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-630CD",ID:0x4f9:0x1b5,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-850CDN",ID:0x4f9:0x1b6,TYPE:10,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5460CN",ID:0x4f9:0x1b7,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-5860CN",ID:0x4f9:0x1b8,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-3360C",ID:0x4f9:0x1ba,TYPE:11,1,RE:0xffff,WE:0xffff CM:,,
MODEL:"DCP-750CN",ID:0x4f9:0x1be,TYPE:10,2,RE:0xffff,WE:0xffff CM:,,
MODEL:"MFC-860CDN",ID:0x4f9:0x1bf,TYPE:12,1,RE:0xffff,WE:0xffff CM:,,
-----------------------------
  0 "MFC-9450CDN"
  1 "DCP-9042CDN"
  2 "MFC-8670DN"
  3 "DCP-9040CN"
  4 "MFC-9440CN"
  5 "DCP-9045CDN"
  6 "MFC-9840CDW"
  7 "MFC-9640CW"
  8 "DCP-357C"
  9 "DCP-353C"
 10 "DCP-157C"
 11 "DCP-153C"
 12 "MFC-265C"
 13 "DCP-155C"
 14 "MFC-880CDN"
 15 "MFC-870CDN"
 16 "MFC-650CD"
 17 "MFC-480CN"
 18 "MFC-885CW"
 19 "MFC-685CW"
 20 "MFC-680CN"
 21 "MFC-465CN"
 22 "MFC-260C"
 23 "MFC-235C"
 24 "MFC-230C"
 25 "DCP-770CN"
 26 "DCP-770CW"
 27 "DCP-560CN"
 28 "DCP-350C"
 29 "DCP-150C"
 30 "DCP-135C"
 31 "MFC-210C"
 32 "MFC-420CN"
 33 "MFC-410CN"
 34 "MFC-620CN"
 35 "MFC-610CLN"
 36 "MFC-620CLN"
 37 "DCP-110C"
 38 "DCP-310CN"
 39 "MFC-5440CN"
 40 "MFC-5840CN"
 41 "MFC-3240C"
 42 "MFC-3340CN"
 43 "MFC-7420"
 44 "MFC-7820N"
 45 "DCP-7010"
 46 "DCP-7020"
 47 "DCP-7025"
 48 "MFC-7220"
 49 "MFC-7225N"
 50 "MFC-9420CN"
 51 "DCP-8060"
 52 "DCP-8065DN"
 53 "MFC-8460N"
 54 "MFC-8860DN"
 55 "MFC-8870DW"
 56 "MFC-8660DN"
 57 "DCP-115C"
 58 "DCP-116C"
 59 "DCP-117C"
 60 "DCP-118C"
 61 "DCP-120C"
 62 "DCP-315CN"
 63 "DCP-340CW"
 64 "MFC-215C"
 65 "MFC-425CN"
 66 "MFC-820CW"
 67 "MFC-820CN"
 68 "MFC-640CW"
 69 "MFC-615CL"
 70 "MFC-830CLN"
 71 "MFC-840CLN"
 72 "DCP-130C"
 73 "DCP-330C"
 74 "DCP-540CN"
 75 "MFC-240C"
 76 "DCP-750CW"
 77 "MFC-440CN"
 78 "MFC-660CN"
 79 "MFC-665CW"
 80 "MFC-845CW"
 81 "MFC-460CN"
 82 "MFC-630CD"
 83 "MFC-850CDN"
 84 "MFC-5460CN"
 85 "MFC-5860CN"
 86 "MFC-3360C"
 87 "DCP-750CN"
 88 "MFC-860CDN"

Devices on network
ping
august@August-Ryzen:~$ 

Vorher habe ich den USB-Port gewechselt. Bisher hing das Gerät an eińem USB 2.0-Port, jetzt an einem 3.0-Port.

Schönen Gruß AugustQ

Hi,

ich habe mal per dmesg nachgeschaut:

[  114.074482] usblp 1-9:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0182
[  117.131787] usb 1-9: usbfs: interface 0 claimed by usblp while 'scan-thread' sets config #1
[  117.131816] usb 1-9: usbfs: process 2799 (scan-thread) did not claim interface 1 before use
[  118.185007] usb 1-9: usbfs: interface 0 claimed by usblp while 'scan-thread' sets config #1
[  118.185020] usb 1-9: usbfs: process 2799 (scan-thread) did not claim interface 1 before use
[  119.080604] usblp1: removed
[  119.112670] usblp 1-9:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0182
[  124.118857] usblp1: removed
[  124.151552] usblp 1-9:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0182
[  129.157789] usblp1: removed
[  129.189433] usblp 1-9:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0182
august@August-Ryzen:~$ 

Die erste Zeile stand schon da vor dem Aufruf von simple-scan, die folgenden Zeilen kamen durch den Scanvorgang dazu.

Vielleicht sagt dies ja etwas.

Schönen Gruß AugustQ

und das hier habe ich noch gefunden:

https://fitzcarraldoblog.wordpress.com/2015/07/29/the-problem-of-scanning-using-usb-multi-function-printers-in-linux-success-at-last/

hope that helps us. AugustQ

moin,

die Ausgabe von 'scanimage' ist korrekt, da Du keine Parameter mit übergeben hast, hatte ich auch nicht mit angegeben.

'scanimage -h' bzw. 'man scanimage' zeigt Dir da schon mehr an.

'scanimage >image01.pnm' müßte scannen und das Ergebnis unter '~/image01.pnm' speichern.

Versuch mal, was dabei rauskommt.

Hallo Ubu-tester,

gerne:

august@August-Ryzen:~$ scanimage >image01.pnm
scanimage: rounded value of br-x from 215.9 to 215.88
scanimage: rounded value of br-y from 355.6 to 355.567
scanimage: sane_start: Invalid argument
august@August-Ryzen:~$ 

Diese Umleitung in eine Datei hatte ich auch schon ausprobiert.

Was mir auffällt: ich habe den Scanner mal wieder unter meinem alten PC laufen lassen ( U 16.04). Dort starte ich den Vorgang, danach drehen sich die Punkte (=simple-scan) und am Scanner gibt es Geräusche, als ob etwas in die Ausgangsposition fährt. Auf meinem neuen PC beginne sich die Punkte zu drehen, aber es kommen keine Geräusche.

Schönen Gruß AugustQ