Macht
du bist nicht in der Gruppe lp 😬
Was heisst das, und was folgt daraus? Es ist eine relativ frische Installation ohne besondere Manipulationen.
Aber langsam lüftet sich wohl der Schleier.
Lg X.
HP-Drucker MFP M175a bzw. -Treiber spukt unter 18.04 etwas
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
|
Anmeldungsdatum: Beiträge: 19617 |
Finde es heraus ☺ Besser als den Exorzisten zu Rufen 😈 Ob danach alles Top ist kann ich aber nicht sagen! Ist schon eine sehr eigenartige Installation bei dir 😇 Zeige auch mal hp-check -r
hp-info -i wegen dem hier warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
Gerne: Saving output in log file: /home/XXX/hp-check.log
HP Linux Imaging and Printing System (ver. 3.17.10)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile
HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
\Gtk-Message: 21:05:22.204: Failed to load module "canberra-gtk-module"
warning: 12-18.04 version is not supported. Using 12-17.04 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 GNU/Linux
Host: michael1972-desktop
Proc: 4.15.0-20-generic #21-Ubuntu SMP Tue Apr 24 06:16:15 UTC 2018 GNU/Linux
Distribution: 12 18.04
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.17.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 12 distro 18.04 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.17.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.17.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.17.10
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 05/20/18 21:05:22
version = 3.17.10
[last_used]
device_uri = "hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW"
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1526673117
notify_upgrade = false
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.2.7 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.22 OK -
Gtk-Message: 21:05:23.830: Failed to load module "canberra-gtk-module"
Gtk-Message: 21:05:23.845: Failed to load module "canberra-gtk-module"
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.27 OK -
dbus DBus - Message bus system REQUIRED - 1.12.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.19.4 OK -
avahi-utils avahi-utils OPTIONAL - 0.7 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.2.7 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.2.7 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.27' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.3 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.0 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.6.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 4.12.1 OK -
python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.12.1 OK -
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.6 OK -
python3-xml Python XML libraries REQUIRED - 2.2.5 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.6.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.4.0 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 7.3.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.17.10 OK -
hpmudext IO-Extension REQUIRED - 3.17.10 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.17.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.17.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-100-colorMFP-M175a
------------------------------
Type: Unknown
Device URI: usb://HP/LaserJet%20100%20colorMFP%20M175a?serial=00CND8F1W4RW&interface=1
PPD: /etc/cups/ppd/HP-LaserJet-100-colorMFP-M175a.ppd
warning: Failed to read /etc/cups/ppd/HP-LaserJet-100-colorMFP-M175a.ppd ppd file
PPD Description:
Printer status: Drucker HP-LaserJet-100-colorMFP-M175a ist im Leerlauf. Aktiviert seit Do 17 Mai 2018 23:29:41 CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
hp-LaserJet-1010
----------------
Type: Printer
Device URI: hp:/usb/hp_LaserJet_1010?serial=00CNFD006114
PPD: /etc/cups/ppd/hp-LaserJet-1010.ppd
warning: Failed to read /etc/cups/ppd/hp-LaserJet-1010.ppd ppd file
PPD Description:
Printer status: Drucker hp-LaserJet-1010 ist im Leerlauf. Aktiviert seit Do 17 Mai 2018 23:32:55 CEST
error: Unable to communicate with device (code=12): hp:/usb/hp_LaserJet_1010?serial=00CNFD006114
error: Device not found
error: Communication status: Failed
HP_LaserJet_100_colorMFP_M175a
------------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW
PPD: /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175a.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_100_colorMFP_M175a.ppd ppd file
PPD Description:
Printer status: Drucker HP_LaserJet_100_colorMFP_M175a ist im Leerlauf. Aktiviert seit Fr 18 Mai 2018 21:55:41 CEST
Required plug-in status: Installed
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW
error: Device not found
error: Communication status: Failed
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 2
Total Warnings: 1
Done.Lg X. |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
hp-info -i gibt HP Linux Imaging and Printing System (ver. 3.17.10)
Device Information Utility ver. 5.2
Copyright (c) 2001-15 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
-----------------
| SELECT DEVICE |
-----------------
Num Device URI CUPS Printer(s)
-------- ---------------------------------------------------------- ------------------------------
0 hp:/usb/hp_LaserJet_1010?serial=00CNFD006114 hp-LaserJet-1010
1 hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW HP_LaserJet_100_colorMFP_M175a
Enter number 0...1 for device (q=quit) ?1
hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW
error: Error opening device (Device not found).
Device Parameters (dynamic data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
back-end hp
cups-printers ['HP_LaserJet_100_colorMFP_M175a']
cups-uri hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW
dev-file
device-state -1
device-uri hp:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W4RW
deviceid
error-state 101
host
is-hp True
panel 0
panel-line1
panel-line2
port 1
scan-uri hpaio:/usb/HP_LaserJet_100_colorMFP_M175a?serial=00CND8F1W
4RW
serial 00CND8F1W4RW
status-code 5002
status-desc
Model Parameters (static data):
Parameter Value(s)
---------------------------- ----------------------------------------------------------
align-type 0
clean-type 0
color-cal-type 0
copy-type 0
embedded-server-type 1
fax-type 0
fw-download False
icon hp_color_laserjet_cm1312_mfp.png
io-mfp-mode 3
io-mode 1
io-support 2
job-storage 0
linefeed-cal-type 0
model HP_LaserJet_100_colorMFP_M175a
model-ui HP LaserJet 100 Colormfp m175a
model1 HP LaserJet 100 Color MFP M175
monitor-type 0
panel-check-type 0
pcard-type 0
plugin 1
plugin-reason 64
power-settings 0
pq-diag-type 0
r-type 0
r0-agent1-kind 4
r0-agent1-sku CE310A
r0-agent1-type 1
r0-agent2-kind 4
r0-agent2-sku CE311A
r0-agent2-type 4
r0-agent3-kind 4
r0-agent3-sku CE313A
r0-agent3-type 5
r0-agent4-kind 4
r0-agent4-sku CE312A
r0-agent4-type 6
scan-src 3
scan-type 5
status-battery-check 0
status-dynamic-counters 0
status-type 10
support-released True
support-subtype 2202411
support-type 2
support-ver 3.11.7
tech-class ['Postscript']
tech-subclass ['Normal']
tech-type 4
usb-pid 1578
usb-vid 1008
wifi-config -1
Status History (most recent first):
Date/Time Code Status Description User Job ID
-------------------- ----- ---------------------------------------- -------- --------
05/20/18 21:10:33 5012 Device communication error BENUTZER 0
Done.Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
Ich kann ehrlich nicht mehr sagen was es bei dir ist Status History (most recent first): Date/Time Code Status Description User Job ID -------------------- ----- ---------------------------------------- -------- -------- 05/20/18 21:15:59 1000 Idle stephan 0 😢 Doch den Exorzisten Rufen. Solage du die HP's verwenden kannst ist es ja schön und gut aber ,,,, wer mag schon Fehler 😇 |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
sudo adduser BENUTZER lp ergab Benutzer »BENUTZER« wird der Gruppe »lp« hinzugefügt … Benutzer BENUTZER wird zur Gruppe lp hinzugefügt. Fertig. und dann id ergab uid=1000(BENUTZER) gid=1000(BENUTZER) Gruppen=1000(BENUTZER),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),126(sambashare) Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
Mache es mal so sudo adduser $USER lp 😉 |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
sudo adduser $USER lp gibt [sudo] Passwort für BENUTZER: Der Benutzer »BENUTZER« ist bereits ein Mitglied der Gruppe »lp«. Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
😬 Was soll ich sagen – dann hab ich wohl Tomaten auf den Augen uid=1000(BENUTZER) gid=1000(BENUTZER) Gruppen=1000(BENUTZER),4(adm),24(cdrom),27(sudo),30(dip),46(plugdev),116(lpadmin),126(sambashare) einmal groups bitte |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
|
|
Anmeldungsdatum: Beiträge: 19617 |
> groups > Ergo nichts mit lp. Das ist schon alles echt komisch bei dir 😕 Zeige mal cat /etc/group so ganz langsam zweifle ich ja an mir selbst 😮 |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
cat /etc/group macht root:x:0: daemon:x:1: bin:x:2: sys:x:3: adm:x:4:syslog,BENUTZERNAME tty:x:5: disk:x:6: lp:x:7:BENUTZERNAME mail:x:8: news:x:9: uucp:x:10: man:x:12: proxy:x:13: kmem:x:15: dialout:x:20: fax:x:21: voice:x:22: cdrom:x:24:BENUTZERNAME floppy:x:25: tape:x:26: sudo:x:27:BENUTZERNAME audio:x:29:pulse dip:x:30:BENUTZERNAME www-data:x:33: backup:x:34: operator:x:37: list:x:38: irc:x:39: src:x:40: gnats:x:41: shadow:x:42: utmp:x:43: video:x:44: sasl:x:45: plugdev:x:46:BENUTZERNAME staff:x:50: games:x:60: users:x:100: nogroup:x:65534: systemd-journal:x:101: systemd-network:x:102: systemd-resolve:x:103: input:x:104: crontab:x:105: syslog:x:106: messagebus:x:107: netdev:x:108: mlocate:x:109: ssl-cert:x:110: uuidd:x:111: avahi-autoipd:x:112: bluetooth:x:113: rtkit:x:114: ssh:x:115: lpadmin:x:116:BENUTZERNAME whoopsie:x:117: scanner:x:118:saned saned:x:119: pulse:x:120: pulse-access:x:121: avahi:x:122: colord:x:123: geoclue:x:124: gdm:x:125: BENUTZERNAME:x:1000: sambashare:x:126:BENUTZERNAME
Dazu besteht keine Ursache. Ich habe übrigens wirklich nichts Spezielles am System herumgebastelt. Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
Ich verstehe es nicht lp:x:7:BENUTZERNAME warum wird das nicht bei id und groups angezeigt ❓ Traue mich gar nicht mehr den Befehl find ~ ! -user $USER -ls ab zu fragen 😈 (Auch wenn der nichts mit der Abfrage id zu tun hat) |
|
Ehemalige
(Themenstarter)
Anmeldungsdatum: Beiträge: 2595 |
find ~ ! -user $USER -ls gibt 9191944 56 -rwxr-xr-x 1 root root 53424 Mai 13 22:56 /home/BENUTZERNAME/hplip-3.18.4/.libs/hpmudext.soT 9191941 404 -rwxr-xr-x 1 root root 412488 Mai 13 22:56 /home/BENUTZERNAME/hplip-3.18.4/.libs/libhpmud.so.0.0.6T 9191943 108 -rwxr-xr-x 1 root root 108176 Mai 13 22:56 /home/BENUTZERNAME/hplip-3.18.4/.libs/cupsext.soT 9191942 80 -rwxr-xr-x 1 root root 78400 Mai 13 22:56 /home/BENUTZERNAME/hplip-3.18.4/.libs/libhpipp.so.0.0.1T 9191945 560 -rwxr-xr-x 1 root root 570728 Mai 13 22:56 /home/BENUTZERNAME/hplip-3.18.4/.libs/libsane-hpaio.so.1.0.0T 9186219 56 -rwxr-xr-x 1 root root 53424 Mai 13 22:41 /home/BENUTZERNAME/hplip/hplip-3.18.4/.libs/hpmudext.soT 9186216 404 -rwxr-xr-x 1 root root 412496 Mai 13 22:41 /home/BENUTZERNAME/hplip/hplip-3.18.4/.libs/libhpmud.so.0.0.6T 9186218 108 -rwxr-xr-x 1 root root 108184 Mai 13 22:41 /home/BENUTZERNAME/hplip/hplip-3.18.4/.libs/cupsext.soT 9186217 80 -rwxr-xr-x 1 root root 78408 Mai 13 22:41 /home/BENUTZERNAME/hplip/hplip-3.18.4/.libs/libhpipp.so.0.0.1T 9186220 560 -rwxr-xr-x 1 root root 570728 Mai 13 22:41 /home/BENUTZERNAME/hplip/hplip-3.18.4/.libs/libsane-hpaio.so.1.0.0T Lg X. |
|
Anmeldungsdatum: Beiträge: 19617 |
Alles i.O. Mein letzter Versuch hp-doctor und nochmal die Toolbox abfragen /usr/bin/hp-toolbox Weitere Ideen habe ich zur Zeit nicht. |