Hallo Dirk, danke der Nachfrage, aber der Aufwand für die Neuinstallation war nicht der Rede wert. Lief ganz prima durch. Und im Nebeneffekt habe ich jetzt einen persönlichen Ordner mit 220 GB. Bei der letzten Installation hatte ich nur wenige GB, aber eine Partiton mit 200 GB auf die ich nicht zugreifen konnte. Deshalb hatte ich die letzten Tage an "home umziehen" gearbeitet, aber die Änderung der fstab ging dann nicht mehr, da ich keine Rechte mehr hatte. Hätte wohl die bisherige home erst löschen sollen, nachdem die fstab geändert war. Also versemmelt.... aber so ist das bei neuen Themen.
Hier aus dem Terminal der Code für die beiden Befehle:
eugen@eugen-QV993AV:~$ dmesg > /tmp/dmesg.log 2>&1 eugen@eugen-QV993AV:~$ ls -l /dev/sg* crw-rw---- 1 root disk 21, 0 Nov 25 10:44 /dev/sg0 crw-rw---- 1 root disk 21, 1 Nov 25 10:44 /dev/sg1 crw-rw----+ 1 root cdrom 21, 2 Nov 25 10:44 /dev/sg2 eugen@eugen-QV993AV:~$
Der Befehl gscanbus bringt dieses Ergebnis (nur den Anfang kopiert):
eugen@eugen-QV993AV:~$ gscanbus couldn't set port: Invalid argument Error while reading from IEEE1394: : Resource temporarily unavailable something is wrong here Error while reading from IEEE1394: : Die Ressource ist zur Zeit nicht verfügbar Could not read topologyMap Error while reading from IEEE1394: : Die Ressource ist zur Zeit nicht verfügbar Could not read topologyMap Error while reading from IEEE1394: : Die Ressource ist zur Zeit nicht verfügbar
Hier die /tmp/dmes.log .... kein EPSON oder epson zu finden. Ganz unten steht, dass Firewire entdeckt wurde.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-39-generic (buildd@roseapple) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #66-Ubuntu SMP Tue Oct 28 13:31:23 UTC 2014 (Ubuntu 3.13.0-39.66-generic 3.13.11.8) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd23afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dd23b000-0x00000000dd24dfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dd24e000-0x00000000dda37fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dda38000-0x00000000ddac6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddac7000-0x00000000ddad4fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ddad5000-0x00000000ddb5ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ddb60000-0x00000000ddc11fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ddc12000-0x00000000ddfacfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ddfad000-0x00000000ddfadfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ddfae000-0x00000000ddff0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ddff1000-0x00000000dee18fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dee19000-0x00000000deff1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000deff2000-0x00000000deffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard QV993AV/3396, BIOS K01 v02.86 05/06/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x21e000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FF0000000 write-back [ 0.000000] 2 base 210000000 mask FF8000000 write-back [ 0.000000] 3 base 218000000 mask FFC000000 write-back [ 0.000000] 4 base 21C000000 mask FFE000000 write-back [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 8GB, type WB [ 0.000000] reg 1, base: 8GB, range: 256MB, type WB [ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB [ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB [ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB [ 0.000000] reg 5, base: 3584MB, range: 512MB, type UC [ 0.000000] total RAM covered: 8160M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 512MB, type WB [ 0.000000] reg 3, base: 4GB, range: 4GB, type WB [ 0.000000] reg 4, base: 8GB, range: 512MB, type WB [ 0.000000] reg 5, base: 8672MB, range: 32MB, type UC [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000f4d70-0x000f4d7f] mapped at [c00f4d70] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff] [ 0.000000] [mem 0x37800000-0x379fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff] [ 0.000000] [mem 0x34000000-0x377fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x33ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff] [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] BRK [0x01b93000, 0x01b93fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x35c32000-0x36e10fff] [ 0.000000] ACPI: RSDP 000f9810 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT dd23b080 000084 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013) [ 0.000000] ACPI: FACP dd245638 00010C (v05 HPQOEM SLIC-BPC 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT dd23b198 00A49B (v02 HPQOEM SLIC-BPC 00000017 INTL 20051117) [ 0.000000] ACPI: FACS ddc10080 000040 [ 0.000000] ACPI: APIC dd245748 000072 (v03 HPQOEM SLIC-BPC 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT dd2457c0 000044 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG dd245808 00003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET dd245848 000038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT dd245880 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT dd245bf0 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001) [ 0.000000] ACPI: SLIC dd24c280 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: SSDT dd24c3f8 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT dd24cda8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: TCPA dd24d840 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) [ 0.000000] ACPI: ASF! dd24d878 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 7780MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] BRK [0x01b94000, 0x01b94fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x1dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xdd23afff] [ 0.000000] node 0: [mem 0xdd24e000-0xdda37fff] [ 0.000000] node 0: [mem 0xddad5000-0xddb5ffff] [ 0.000000] node 0: [mem 0xddfad000-0xddfadfff] [ 0.000000] node 0: [mem 0xddff1000-0xdee18fff] [ 0.000000] node 0: [mem 0xdeff2000-0xdeffffff] [ 0.000000] node 0: [mem 0x00000000-0x1dffffff] [ 0.000000] On node 0 totalpages: 2082947 [ 0.000000] free_area_init_node: node 0, pgdat c199b4c0, node_mem_map f1872020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 224254 pages, LIFO batch:31 [ 0.000000] HighMem zone: 15561 pages used for memmap [ 0.000000] HighMem zone: 1854697 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb3000 s36096 r0 d21248 u57344 [ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2081163 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-39-generic root=UUID=bf788750-3337-4ba9-895a-72843290c68e ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] allocated 17760248 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:0021e000) [ 0.000000] Memory: 8213736K/8331788K available (6539K kernel code, 640K rwdata, 2764K rodata, 872K init, 924K bss, 118052K reserved, 7418788K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc19b9000 - 0xc1a93000 ( 872 kB) [ 0.000000] .data : 0xc16631f2 - 0xc19b8280 (3412 kB) [ 0.000000] .text : 0xc1000000 - 0xc16631f2 (6540 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f7408000 soft=f740a000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 3292.426 MHz processor [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.85 BogoMIPS (lpj=13169704) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000018] Security Framework initialized [ 0.000028] AppArmor: AppArmor initialized [ 0.000029] Yama: becoming mindful. [ 0.000057] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000058] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000173] Initializing cgroup subsys memory [ 0.000176] Initializing cgroup subsys devices [ 0.000177] Initializing cgroup subsys freezer [ 0.000178] Initializing cgroup subsys blkio [ 0.000179] Initializing cgroup subsys perf_event [ 0.000181] Initializing cgroup subsys hugetlb [ 0.000198] CPU: Physical Processor ID: 0 [ 0.000199] CPU: Processor Core ID: 0 [ 0.000202] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000202] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000205] mce: CPU supports 7 MCE banks [ 0.000213] CPU0: Thermal monitoring enabled (TM1) [ 0.000222] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.000222] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.000222] tlb_flushall_shift: 2 [ 0.000503] Freeing SMP alternatives memory: 32K (c1a93000 - c1a9b000) [ 0.001329] ACPI: Core revision 20131115 [ 0.005752] ACPI: All ACPI Tables successfully acquired [ 0.005949] ftrace: allocating 27830 entries in 55 pages [ 0.014968] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.015384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.055065] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09) [ 0.055074] TSC deadline timer enabled [ 0.055083] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.055088] ... version: 3 [ 0.055089] ... bit width: 48 [ 0.055090] ... generic registers: 4 [ 0.055090] ... value mask: 0000ffffffffffff [ 0.055091] ... max period: 0000ffffffffffff [ 0.055092] ... fixed-purpose events: 3 [ 0.055093] ... event mask: 000000070000000f [ 0.056160] CPU 1 irqstacks, hard=f74fc000 soft=f74fe000 [ 0.056161] x86: Booting SMP configuration: [ 0.066256] Initializing CPU#1 [ 0.069241] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.056162] .... node #0, CPUs: #1 [ 0.069300] CPU 2 irqstacks, hard=f75b0000 soft=f75b2000 [ 0.079401] Initializing CPU#2 [ 0.069301] #2 [ 0.082410] CPU 3 irqstacks, hard=f75f4000 soft=f75f6000 [ 0.092504] Initializing CPU#3 [ 0.082412] #3 [ 0.095462] x86: Booted up 1 node, 4 CPUs [ 0.095465] smpboot: Total of 4 processors activated (26339.40 BogoMIPS) [ 0.098051] devtmpfs: initialized [ 0.098169] EVM: security.selinux [ 0.098169] EVM: security.SMACK64 [ 0.098170] EVM: security.ima [ 0.098171] EVM: security.capability [ 0.098228] PM: Registering ACPI NVS region [mem 0xddb60000-0xddc11fff] (729088 bytes) [ 0.098235] PM: Registering ACPI NVS region [mem 0xddfae000-0xddff0fff] (274432 bytes) [ 0.098822] pinctrl core: initialized pinctrl subsystem [ 0.098863] regulator-dummy: no parameters [ 0.098893] RTC time: 10:44:14, date: 11/25/14 [ 0.098916] NET: Registered protocol family 16 [ 0.099004] EISA bus registered [ 0.099005] cpuidle: using governor ladder [ 0.099006] cpuidle: using governor menu [ 0.099052] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.099054] ACPI: bus type PCI registered [ 0.099055] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.099098] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.099100] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.099101] PCI: Using MMCONFIG for extended config space [ 0.099101] PCI: Using configuration type 1 for base access [ 0.099714] bio: create slab <bio-0> at 0 [ 0.099815] ACPI: Added _OSI(Module Device) [ 0.099816] ACPI: Added _OSI(Processor Device) [ 0.099817] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.099818] ACPI: Added _OSI(Processor Aggregator Device) [ 0.102488] ACPI: Executed 1 blocks of module-level executable AML code [ 0.115753] ACPI: SSDT dda74018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.116071] ACPI: Dynamic OEM Table Load: [ 0.116073] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.127634] ACPI: SSDT dda75a98 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.127970] ACPI: Dynamic OEM Table Load: [ 0.127971] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.139556] ACPI: SSDT dda76c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.139870] ACPI: Dynamic OEM Table Load: [ 0.139872] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.151898] ACPI: Interpreter enabled [ 0.151908] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.151911] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.151921] ACPI: (supports S0 S3 S4 S5) [ 0.151922] ACPI: Using IOAPIC for interrupt routing [ 0.151939] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.152056] ACPI: No dock devices found. [ 0.157267] ACPI: Power Resource [FN00] (off) [ 0.157320] ACPI: Power Resource [FN01] (off) [ 0.157370] ACPI: Power Resource [FN02] (off) [ 0.157420] ACPI: Power Resource [FN03] (off) [ 0.157470] ACPI: Power Resource [FN04] (off) [ 0.157928] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.157931] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.158077] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.158159] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.158576] PCI host bridge to bus 0000:00 [ 0.158579] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.158580] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.158581] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.158583] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.158584] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.158585] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.158587] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.158588] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.158589] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.158590] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.158592] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff] [ 0.158597] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.158669] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.158694] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.158730] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.158777] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.158799] pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit] [ 0.158865] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.158905] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.158933] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.158954] pci 0000:00:16.0: reg 0x10: [mem 0xf723c000-0xf723c00f 64bit] [ 0.159026] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.159091] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 [ 0.159108] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7] [ 0.159116] pci 0000:00:16.3: reg 0x14: [mem 0xf723a000-0xf723afff] [ 0.159248] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.159265] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff] [ 0.159272] pci 0000:00:19.0: reg 0x14: [mem 0xf7239000-0xf7239fff] [ 0.159280] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f] [ 0.159338] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.159378] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.159403] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.159423] pci 0000:00:1a.0: reg 0x10: [mem 0xf7238000-0xf72383ff] [ 0.159511] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.159561] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.159587] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.159601] pci 0000:00:1b.0: reg 0x10: [mem 0xf7230000-0xf7233fff 64bit] [ 0.159664] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.159705] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.159734] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.159753] pci 0000:00:1d.0: reg 0x10: [mem 0xf7237000-0xf72373ff] [ 0.159838] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.159890] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.159914] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.159993] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.160016] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100 [ 0.160174] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.160191] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097] [ 0.160198] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083] [ 0.160205] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077] [ 0.160212] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063] [ 0.160219] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.160226] pci 0000:00:1f.2: reg 0x24: [mem 0xf7236000-0xf72367ff] [ 0.160268] pci 0000:00:1f.2: PME# supported from D3hot [ 0.160324] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.160337] pci 0000:00:1f.3: reg 0x10: [mem 0xf7235000-0xf72350ff 64bit] [ 0.160357] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.160460] pci 0000:01:00.0: [10de:0fc2] type 00 class 0x030000 [ 0.160469] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff] [ 0.160478] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.160486] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.160492] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.160498] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref] [ 0.160560] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300 [ 0.160568] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff] [ 0.167497] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.167501] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.167505] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.167511] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.167567] pci 0000:02:00.0: [104c:8024] type 00 class 0x0c0010 [ 0.167584] pci 0000:02:00.0: reg 0x10: [mem 0xf7104000-0xf71047ff] [ 0.167593] pci 0000:02:00.0: reg 0x14: [mem 0xf7100000-0xf7103fff] [ 0.167659] pci 0000:02:00.0: supports D1 D2 [ 0.167660] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.167717] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.167722] pci 0000:00:1e.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.167727] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.167728] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.167730] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.167731] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.167732] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.167733] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.167735] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.167736] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.167737] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.167739] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode) [ 0.167752] pci_bus 0000:00: on NUMA node 0 [ 0.167753] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 0.168277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.168324] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.168363] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.168406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.168447] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.168485] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.168525] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.168564] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.168780] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.168785] ACPI: \_SB_.PCI0: notify handler is installed [ 0.168829] Found 1 acpi root devices [ 0.168893] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.168894] vgaarb: loaded [ 0.168895] vgaarb: bridge control possible 0000:01:00.0 [ 0.169003] SCSI subsystem initialized [ 0.169029] libata version 3.00 loaded. [ 0.169042] ACPI: bus type USB registered [ 0.169051] usbcore: registered new interface driver usbfs [ 0.169056] usbcore: registered new interface driver hub [ 0.169070] usbcore: registered new device driver usb [ 0.169140] PCI: Using ACPI for IRQ routing [ 0.170594] PCI: pci_cache_line_size set to 64 bytes [ 0.170634] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.170636] e820: reserve RAM buffer [mem 0xdd23b000-0xdfffffff] [ 0.170638] e820: reserve RAM buffer [mem 0xdda38000-0xdfffffff] [ 0.170640] e820: reserve RAM buffer [mem 0xddb60000-0xdfffffff] [ 0.170642] e820: reserve RAM buffer [mem 0xddfae000-0xdfffffff] [ 0.170643] e820: reserve RAM buffer [mem 0xdee19000-0xdfffffff] [ 0.170644] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff] [ 0.170645] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff] [ 0.170696] NetLabel: Initializing [ 0.170697] NetLabel: domain hash size = 128 [ 0.170697] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.170706] NetLabel: unlabeled traffic allowed by default [ 0.170776] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.170780] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.172809] Switched to clocksource hpet [ 0.177440] AppArmor: AppArmor Filesystem Enabled [ 0.177458] pnp: PnP ACPI init [ 0.177466] ACPI: bus type PNP registered [ 0.177525] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.177527] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.177536] pnp 00:01: [dma 4] [ 0.177547] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.177561] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.177620] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.177646] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.177647] system 00:04: [io 0x0200-0x020f] has been reserved [ 0.177649] system 00:04: [io 0xffff] has been reserved [ 0.177650] system 00:04: [io 0xffff] has been reserved [ 0.177652] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.177653] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.177655] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.177656] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.177658] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.177680] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.177708] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.177710] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.177784] system 00:07: [io 0x0a20-0x0a3f] has been reserved [ 0.177785] system 00:07: [io 0x0a10-0x0a1f] has been reserved [ 0.177787] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.177813] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.177846] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.177874] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.177876] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.177895] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.178023] pnp 00:0c: [dma 0 disabled] [ 0.178080] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.178306] pnp 00:0d: [dma 1] [ 0.178370] pnp 00:0d: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.178398] pnp 00:0e: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.178564] system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.178566] system 00:0f: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.178567] system 00:0f: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.178569] system 00:0f: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.178570] system 00:0f: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.178572] system 00:0f: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.178573] system 00:0f: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.178576] system 00:0f: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.178577] system 00:0f: [mem 0xff000000-0xffffffff] has been reserved [ 0.178579] system 00:0f: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.178580] system 00:0f: [mem 0xf2000000-0xf2000fff] has been reserved [ 0.178582] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178697] pnp: PnP ACPI: found 16 devices [ 0.178698] ACPI: bus type PNP unregistered [ 0.178700] PnPBIOS: Disabled by ACPI PNP [ 0.214625] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.214627] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.214630] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff] [ 0.214632] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.214635] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.214639] pci 0000:00:1e.0: bridge window [mem 0xf7100000-0xf71fffff] [ 0.214646] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.214647] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.214649] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.214650] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.214651] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.214653] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.214654] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.214655] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.214656] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.214658] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.214659] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.214660] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff] [ 0.214662] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref] [ 0.214663] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff] [ 0.214664] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.214666] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.214667] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.214668] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.214669] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.214671] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.214672] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff] [ 0.214673] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.214675] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.214676] pci_bus 0000:02: resource 13 [mem 0xe0000000-0xfeafffff] [ 0.214696] NET: Registered protocol family 2 [ 0.214809] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.214821] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.214830] TCP: Hash tables configured (established 8192 bind 8192) [ 0.214839] TCP: reno registered [ 0.214840] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.214843] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.214872] NET: Registered protocol family 1 [ 0.252926] pci 0000:01:00.0: Boot video device [ 0.252940] PCI: CLS 64 bytes, default 64 [ 0.252970] Trying to unpack rootfs image as initramfs... [ 0.472744] Freeing initrd memory: 18300K (f5c32000 - f6e11000) [ 0.472975] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12 [ 0.472984] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12 [ 0.472989] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12 [ 0.472993] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12 [ 0.473036] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.473037] Scanning for low memory corruption every 60 seconds [ 0.473225] Initialise system trusted keyring [ 0.473251] audit: initializing netlink socket (disabled) [ 0.473258] type=2000 audit(1416912254.476:1): initialized [ 0.488509] bounce pool size: 64 pages [ 0.488518] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.489291] zbud: loaded [ 0.489352] VFS: Disk quotas dquot_6.5.2 [ 0.489382] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.489635] fuse init (API version 7.22) [ 0.489684] msgmni has been set to 1588 [ 0.489718] Key type big_key registered [ 0.490024] Key type asymmetric registered [ 0.490025] Asymmetric key parser 'x509' registered [ 0.490043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.490069] io scheduler noop registered [ 0.490071] io scheduler deadline registered (default) [ 0.490084] io scheduler cfq registered [ 0.490221] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.490257] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490265] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490288] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 0.490289] vesafb: scrolling: redraw [ 0.490291] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.490525] vesafb: framebuffer at 0xf1000000, mapped to 0xf8480000, using 5120k, total 5120k [ 0.541734] Console: switching to colour frame buffer device 160x64 [ 0.592893] fb0: VESA VGA frame buffer device [ 0.592903] intel_idle: MWAIT substates: 0x1120 [ 0.592904] intel_idle: v0.4 model 0x3A [ 0.592905] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.592967] ipmi message handler version 39.2 [ 0.593015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.593019] ACPI: Power Button [PWRB] [ 0.593039] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.593040] ACPI: Power Button [PWRF] [ 0.593081] ACPI: Fan [FAN0] (off) [ 0.593096] ACPI: Fan [FAN1] (off) [ 0.593113] ACPI: Fan [FAN2] (off) [ 0.593129] ACPI: Fan [FAN3] (off) [ 0.593144] ACPI: Fan [FAN4] (off) [ 0.649024] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.649026] ACPI: Thermal Zone [TZ00] (28 C) [ 0.649156] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.649157] ACPI: Thermal Zone [TZ01] (30 C) [ 0.649173] GHES: HEST is not enabled! [ 0.649221] isapnp: Scanning for PnP cards... [ 0.652845] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.673297] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.694531] 0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A [ 0.694676] Linux agpgart interface v0.103 [ 0.694757] tpm_tis 00:0e: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.944843] tpm_tis 00:0e: TPM is disabled/deactivated (0x7) [ 0.945757] brd: module loaded [ 0.946222] loop: module loaded [ 0.946441] libphy: Fixed MDIO Bus: probed [ 0.946495] tun: Universal TUN/TAP device driver, 1.6 [ 0.946496] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.946532] PPP generic driver version 2.4.2 [ 0.946561] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.946564] ehci-pci: EHCI PCI platform driver [ 0.946652] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.946656] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.946669] ehci-pci 0000:00:1a.0: debug port 2 [ 0.950560] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.950574] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7238000 [ 0.960812] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.960842] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.960844] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.960845] usb usb1: Product: EHCI Host Controller [ 0.960846] usb usb1: Manufacturer: Linux 3.13.0-39-generic ehci_hcd [ 0.960847] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.960923] hub 1-0:1.0: USB hub found [ 0.960929] hub 1-0:1.0: 3 ports detected [ 0.961086] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.961089] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.961102] ehci-pci 0000:00:1d.0: debug port 2 [ 0.963434] isapnp: No Plug & Play device found [ 0.964994] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.965005] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7237000 [ 0.976810] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.976838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.976840] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.976841] usb usb2: Product: EHCI Host Controller [ 0.976843] usb usb2: Manufacturer: Linux 3.13.0-39-generic ehci_hcd [ 0.976844] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.976928] hub 2-0:1.0: USB hub found [ 0.976933] hub 2-0:1.0: 3 ports detected [ 0.977021] ehci-platform: EHCI generic platform driver [ 0.977026] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.977027] ohci-pci: OHCI PCI platform driver [ 0.977032] ohci-platform: OHCI generic platform driver [ 0.977035] uhci_hcd: USB Universal Host Controller Interface driver [ 0.977125] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.977128] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.977218] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.977234] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X [ 0.977281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.977282] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.977283] usb usb3: Product: xHCI Host Controller [ 0.977285] usb usb3: Manufacturer: Linux 3.13.0-39-generic xhci_hcd [ 0.977286] usb usb3: SerialNumber: 0000:00:14.0 [ 0.977354] hub 3-0:1.0: USB hub found [ 0.977366] hub 3-0:1.0: 4 ports detected [ 0.977599] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.977601] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.977629] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.977630] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.977631] usb usb4: Product: xHCI Host Controller [ 0.977633] usb usb4: Manufacturer: Linux 3.13.0-39-generic xhci_hcd [ 0.977634] usb usb4: SerialNumber: 0000:00:14.0 [ 0.977696] hub 4-0:1.0: USB hub found [ 0.977708] hub 4-0:1.0: 4 ports detected [ 1.016852] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.019696] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.019704] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.019871] mousedev: PS/2 mouse device common for all mice [ 1.020158] rtc_cmos 00:05: RTC can wake from S4 [ 1.020291] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.020317] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.020356] device-mapper: uevent: version 1.0.3 [ 1.020410] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 1.020421] platform eisa.0: Probing EISA bus 0 [ 1.020424] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 1.020425] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 1.020426] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 1.020427] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 1.020428] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 1.020429] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 1.020430] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 1.020432] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 1.020433] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 1.020434] platform eisa.0: EISA: Detected 0 cards [ 1.020437] cpufreq-nforce2: No nForce2 chipset. [ 1.020439] ledtrig-cpu: registered to indicate activity on CPUs [ 1.020515] TCP: cubic registered [ 1.020563] NET: Registered protocol family 10 [ 1.020674] NET: Registered protocol family 17 [ 1.020681] Key type dns_resolver registered [ 1.020824] Using IPI No-Shortcut mode [ 1.020997] Loading compiled-in X.509 certificates [ 1.023240] Loaded X.509 cert 'Magrathea: Glacier signing key: a69631ee8432bd22004ba4daa978cfd92cd55e69' [ 1.023248] registered taskstats version 1 [ 1.024882] Key type trusted registered [ 1.026186] Key type encrypted registered [ 1.027471] AppArmor: AppArmor sha1 policy hashing enabled [ 1.072913] tpm_tis 00:0e: A TPM error (7) occurred attempting to read a pcr value [ 1.072915] IMA: No TPM chip found, activating TPM-bypass! [ 1.073098] regulator-dummy: disabling [ 1.073144] Magic number: 6:653:730 [ 1.073231] rtc_cmos 00:05: setting system clock to 2014-11-25 10:44:15 UTC (1416912255) [ 1.073646] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.073647] EDD information not available. [ 1.073680] PM: Hibernation image not present or could not be loaded. [ 1.073903] Freeing unused kernel memory: 872K (c19b9000 - c1a93000) [ 1.073955] Write protecting the kernel text: 6544k [ 1.074013] Write protecting the kernel read-only data: 2768k [ 1.074014] NX-protecting the kernel data: 5744k [ 1.082393] systemd-udevd[109]: starting version 204 [ 1.100857] pps_core: LinuxPPS API ver. 1 registered [ 1.100863] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.104754] PTP clock support registered [ 1.114046] ahci 0000:00:1f.2: version 3.0 [ 1.114716] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.116379] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.116381] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.128819] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode [ 1.128823] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.145161] scsi0 : ahci [ 1.145229] scsi1 : ahci [ 1.145285] scsi2 : ahci [ 1.145335] scsi3 : ahci [ 1.145383] scsi4 : ahci [ 1.145442] scsi5 : ahci [ 1.145470] ata1: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236100 irq 42 [ 1.145471] ata2: DUMMY [ 1.145473] ata3: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236200 irq 42 [ 1.145474] ata4: SATA max UDMA/133 abar m2048@0xf7236000 port 0xf7236280 irq 42 [ 1.145475] ata5: DUMMY [ 1.145476] ata6: DUMMY [ 1.145637] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.145655] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 1.180837] firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.272881] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.353751] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.353753] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b4:b5:2f:bd:a2:9e [ 1.353755] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.353787] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 1.405153] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.405158] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.405409] hub 1-1:1.0: USB hub found [ 1.405507] hub 1-1:1.0: 6 ports detected [ 1.464816] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.464844] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.465588] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.465594] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.465598] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.466190] ata3.00: ATA-7: WDC WD2500JS-00MHB0, 02.01C03, max UDMA/133 [ 1.466195] ata3.00: 488397168 sectors, multi 16: LBA48 [ 1.467025] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.467031] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.467034] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.467630] ata3.00: configured for UDMA/133 [ 1.472813] tsc: Refined TSC clocksource calibration: 3292.520 MHz [ 1.472822] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.474207] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.474213] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.474217] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.475216] ata1.00: ATA-8: ST500DM002-1BD142, HP73, max UDMA/100 [ 1.475221] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.476878] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.476884] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.476888] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.477891] ata1.00: configured for UDMA/100 [ 1.478065] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 HP73 PQ: 0 ANSI: 5 [ 1.478170] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.478176] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.478179] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.478249] sd 0:0:0:0: [sda] Write Protect is off [ 1.478252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.478290] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.478300] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-00M 02.0 PQ: 0 ANSI: 5 [ 1.478432] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.478436] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.478489] sd 2:0:0:0: [sdb] Write Protect is off [ 1.478491] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.478522] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.480066] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.480069] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.480070] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.492614] ata4.00: ATAPI: hp DVD-RAM SW820, UH05, max UDMA/100 [ 1.496521] sda: sda1 sda2 [ 1.496751] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.506099] ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.506105] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.506108] ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.517378] sdb: sdb1 sdb2 < sdb5 > [ 1.517933] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.518810] ata4.00: configured for UDMA/100 [ 1.524571] scsi 3:0:0:0: CD-ROM hp DVD-RAM SW820 UH05 PQ: 0 ANSI: 5 [ 1.537044] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.537048] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.537182] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.537292] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 1.572906] usb 3-4: new high-speed USB device number 2 using xhci_hcd [ 1.592834] usb 3-4: device descriptor read/8, error 5 [ 1.680844] firewire_core 0000:02:00.0: created device fw0: GUID 001fb5010002c69a, S400 [ 1.713655] usb 3-4: New USB device found, idVendor=057c, idProduct=62ff [ 1.713660] usb 3-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 1.713663] usb 3-4: Product: FRITZ!WLAN USB Stick v2 [ 1.713666] usb 3-4: Manufacturer: AVM Berlin [ 1.713668] usb 3-4: SerialNumber: BC05430E4758 [ 1.718526] usb-storage 3-4:1.0: USB Mass Storage device detected [ 1.718604] scsi6 : usb-storage 3-4:1.0 [ 1.718646] usbcore: registered new interface driver usb-storage [ 1.824824] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.941556] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 1.957331] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.957344] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.957569] hub 2-1:1.0: USB hub found [ 1.957827] hub 2-1:1.0: 8 ports detected [ 2.028870] usb 1-1.5: new low-speed USB device number 3 using ehci-pci [ 2.136126] usb 1-1.5: New USB device found, idVendor=03f0, idProduct=0024 [ 2.136131] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.136134] usb 1-1.5: Product: HP Basic USB Keyboard [ 2.136137] usb 1-1.5: Manufacturer: CHICONY [ 2.208847] usb 1-1.6: new low-speed USB device number 4 using ehci-pci [ 2.307368] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c078 [ 2.307373] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.307376] usb 1-1.6: Product: USB Laser Mouse [ 2.307378] usb 1-1.6: Manufacturer: Logitech [ 2.472846] Switched to clocksource tsc [ 2.526180] random: init urandom read with 107 bits of entropy available [ 2.717247] scsi 6:0:0:0: CD-ROM FRITZ! WLAN selfinstall 1.00 PQ: 0 ANSI: 0 CCS [ 2.718051] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 2.718117] sr 6:0:0:0: Attached scsi CD-ROM sr1 [ 2.718157] sr 6:0:0:0: Attached scsi generic sg3 type 5 [ 2.833787] random: nonblocking pool is initialized [ 14.452304] Adding 8330236k swap on /dev/sdb5. Priority:-1 extents:1 across:8330236k FS [ 14.525084] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.580138] systemd-udevd[294]: starting version 204 [ 14.687559] lp: driver loaded but no devices found [ 14.691248] ACPI: Video Device [PEG0] (multi-head: yes rom: no post: no) [ 14.691397] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 14.691461] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 14.692224] acpi device:1b: registered as cooling_device9 [ 14.692266] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/LNXVIDEO:01/input/input6 [ 14.693158] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 14.693940] wmi: Mapper loaded [ 14.695516] ppdev: user-space parallel port driver [ 14.701179] parport_pc 00:0d: reported by Plug and Play ACPI [ 14.701336] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 14.727573] [drm] Initialized drm 1.1.0 20060810 [ 14.742162] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 14.742168] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.742172] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 14.742175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.742177] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 14.742180] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.742181] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.750511] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X [ 14.798561] lp0: using parport0 (interrupt-driven). [ 14.828207] ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95) [ 14.828234] ACPI Warning: \_SB_.PCI0.PEG0.VGA_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 14.828262] checking generic (f1000000 500000) vs hw (e0000000 10000000) [ 14.828265] checking generic (f1000000 500000) vs hw (f0000000 2000000) [ 14.828266] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 14.828281] Console: switching to colour dummy device 80x25 [ 14.830823] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7020a2 [ 14.830827] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7) [ 14.830829] nouveau [ DEVICE][0000:01:00.0] Family : NVE0 [ 14.832524] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image... [ 14.832531] nouveau [ VBIOS][0000:01:00.0] ... signature not found [ 14.832532] nouveau [ VBIOS][0000:01:00.0] checking PROM for image... [ 14.848490] kvm: disabled by bios [ 14.860396] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 14.877880] hda_codec: ALC221: SKU not ready 0x415901f0 [ 14.878249] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 14.878252] speaker_outs=1 (0x17/0x0/0x0/0x0/0x0) [ 14.878253] hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 14.878254] mono: mono_out=0x0 [ 14.878255] inputs: [ 14.878257] Mic=0x1a [ 14.878258] Line=0x1b [ 14.878259] realtek: No valid SSID, checking pincfg 0x415901f0 for NID 0x1d [ 14.878260] realtek: Enable default setup for auto mode as fallback [ 14.886428] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.886488] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.886535] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.886582] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 14.892268] WARNING! power/level is deprecated; use power/control instead [ 14.940106] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid [ 14.940110] nouveau [ VBIOS][0000:01:00.0] using image from PROM [ 14.940207] nouveau [ VBIOS][0000:01:00.0] BIT signature found [ 14.940211] nouveau [ VBIOS][0000:01:00.0] version 80.07.53.00.22 [ 14.941763] nouveau 0000:01:00.0: irq 46 for MSI/MSI-X [ 14.941773] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled [ 14.941818] nouveau [ PFB][0000:01:00.0] RAM type: DDR3 [ 14.941820] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB [ 14.941822] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags [ 14.944512] hidraw: raw HID events driver (C) Jiri Kosina [ 14.946620] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv [ 14.963542] usbcore: registered new interface driver usbhid [ 14.963545] usbhid: USB HID core driver [ 15.015464] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input12 [ 15.015557] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1a.0-1.5/input0 [ 15.015669] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input13 [ 15.017189] hid-generic 0003:046D:C078.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.6/input0 [ 15.030034] type=1400 audit(1416908669.455:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=373 comm="apparmor_parser" [ 15.030040] type=1400 audit(1416908669.455:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser" [ 15.030045] type=1400 audit(1416908669.455:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser" [ 15.030054] type=1400 audit(1416908669.455:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=393 comm="apparmor_parser" [ 15.030059] type=1400 audit(1416908669.455:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=393 comm="apparmor_parser" [ 15.030064] type=1400 audit(1416908669.455:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser" [ 15.030529] type=1400 audit(1416908669.455:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=373 comm="apparmor_parser" [ 15.030535] type=1400 audit(1416908669.455:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=373 comm="apparmor_parser" [ 15.030542] type=1400 audit(1416908669.455:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=393 comm="apparmor_parser" [ 15.030547] type=1400 audit(1416908669.455:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser" [ 15.069055] intel_rapl: domain uncore energy ctr 0:0 not working, skip [ 15.320505] input: HP WMI hotkeys as /devices/virtual/input/input11 [ 16.224418] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external [ 16.224427] nouveau [ PTHERM][0000:01:00.0] fan management: automatic [ 16.224431] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes [ 16.224462] nouveau [ CLK][0000:01:00.0] 07: core 324 MHz memory 324 MHz [ 16.224468] nouveau [ CLK][0000:01:00.0] 0f: core 324-875 MHz memory 891 MHz [ 16.224604] nouveau [ CLK][0000:01:00.0] --: core 324 MHz memory 324 MHz [ 16.250001] [TTM] Zone kernel: Available graphics memory: 407076 kiB [ 16.250003] [TTM] Zone highmem: Available graphics memory: 4116470 kiB [ 16.250004] [TTM] Initializing pool allocator [ 16.250007] [TTM] Initializing DMA pool allocator [ 16.250015] nouveau [ DRM] VRAM: 2048 MiB [ 16.250016] nouveau [ DRM] GART: 1048576 MiB [ 16.250019] nouveau [ DRM] TMDS table version 2.0 [ 16.250020] nouveau [ DRM] DCB version 4.0 [ 16.250022] nouveau [ DRM] DCB outp 00: 02000f00 00000000 [ 16.250024] nouveau [ DRM] DCB outp 01: 01000f02 00020030 [ 16.250025] nouveau [ DRM] DCB outp 02: 02811fa6 0f420010 [ 16.250026] nouveau [ DRM] DCB outp 03: 02011f62 00020010 [ 16.250027] nouveau [ DRM] DCB outp 04: 08822fc6 0f420010 [ 16.250028] nouveau [ DRM] DCB outp 05: 08022f82 00020010 [ 16.250030] nouveau [ DRM] DCB conn 00: 00001030 [ 16.250031] nouveau [ DRM] DCB conn 01: 00002146 [ 16.250033] nouveau [ DRM] DCB conn 02: 00010246 [ 16.251124] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.251126] [drm] No driver support for vblank timestamp query. [ 16.251128] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 16.260982] nouveau [ DRM] MM: using COPY for buffer copies [ 16.447608] nouveau [ DRM] allocated 1280x1024 fb: 0x80000, bo ee101600 [ 16.447697] fbcon: nouveaufb (fb0) is primary device [ 16.512318] Console: switching to colour frame buffer device 160x64 [ 16.513865] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 16.513866] nouveau 0000:01:00.0: registered panic notifier [ 16.513870] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0 [ 16.513949] hda_intel: Disabling MSI [ 16.513955] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 16.513990] hda-intel 0000:01:00.1: Disabling 64bit DMA [ 16.517662] hda-intel 0000:01:00.1: Enable delay in RIRB handling [ 16.537949] usb 3-4: USB disconnect, device number 2 [ 16.960484] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 16.960543] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 16.960586] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 17.928439] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 17.953031] usb 3-4: New USB device found, idVendor=057c, idProduct=8403 [ 17.953033] usb 3-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 17.953035] usb 3-4: Product: FRITZ!WLAN N2.4 [ 17.953036] usb 3-4: Manufacturer: AVM Berlin [ 17.953037] usb 3-4: SerialNumber: E4758 [ 17.968676] cfg80211: Calling CRDA to update world regulatory domain [ 18.004360] usb 3-4: ath9k_htc: Firmware htc_9271.fw requested [ 18.004409] usbcore: registered new interface driver ath9k_htc [ 18.249357] cfg80211: World regulatory domain updated: [ 18.249359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.249361] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.249362] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.249363] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.249364] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.249365] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.551459] usb 3-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 [ 18.789276] ath9k_htc 3-4:1.0: ath9k_htc: HTC initialized with 33 credits [ 19.056975] ath9k_htc 3-4:1.0: ath9k_htc: FW Version: 1.3 [ 19.056980] ath: EEPROM regdomain: 0x8114 [ 19.056982] ath: EEPROM indicates we should expect a country code [ 19.056984] ath: doing EEPROM country->regdmn map search [ 19.056986] ath: country maps to regdmn code: 0x37 [ 19.056988] ath: Country alpha2 being used: DE [ 19.056989] ath: Regpair used: 0x37 [ 19.065986] ieee80211 phy0: Atheros AR9271 Rev:1 [ 19.065998] cfg80211: Calling CRDA for country: DE [ 19.071494] cfg80211: Regulatory domain changed to country: DE [ 19.071498] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.071499] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 19.071501] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 19.071502] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 19.071504] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 19.071505] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 19.327821] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 19.639871] init: failsafe main process (670) killed by TERM signal [ 19.825287] Bluetooth: Core ver 2.17 [ 19.825302] NET: Registered protocol family 31 [ 19.825304] Bluetooth: HCI device and connection manager initialized [ 19.825310] Bluetooth: HCI socket layer initialized [ 19.825312] Bluetooth: L2CAP socket layer initialized [ 19.825316] Bluetooth: SCO socket layer initialized [ 19.830796] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.830799] Bluetooth: BNEP filters: protocol multicast [ 19.830805] Bluetooth: BNEP socket layer initialized [ 19.837254] Bluetooth: RFCOMM TTY layer initialized [ 19.837263] Bluetooth: RFCOMM socket layer initialized [ 19.837268] Bluetooth: RFCOMM ver 1.11 [ 20.056349] audit_printk_skb: 126 callbacks suppressed [ 20.056354] type=1400 audit(1416908674.483:54): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser" [ 20.056362] type=1400 audit(1416908674.483:55): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=812 comm="apparmor_parser" [ 20.072352] type=1400 audit(1416908674.499:56): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser" [ 20.073423] type=1400 audit(1416908674.499:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=812 comm="apparmor_parser" [ 20.091916] type=1400 audit(1416908674.515:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser" [ 20.091921] type=1400 audit(1416908674.515:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=812 comm="apparmor_parser" [ 20.120347] type=1400 audit(1416908674.547:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser" [ 20.121747] type=1400 audit(1416908674.547:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser" [ 20.121750] type=1400 audit(1416908674.547:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=812 comm="apparmor_parser" [ 20.146979] type=1400 audit(1416908674.571:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=812 comm="apparmor_parser" [ 20.544540] init: cups main process (800) killed by HUP signal [ 20.544549] init: cups main process ended, respawning [ 22.081666] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.081922] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.213435] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 22.316337] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 22.316571] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.316866] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.778358] wlan0: authenticate with 00:1a:4f:90:db:37 [ 24.188998] wlan0: send auth to 00:1a:4f:90:db:37 (try 1/3) [ 24.190578] wlan0: authenticated [ 24.192218] wlan0: associate with 00:1a:4f:90:db:37 (try 1/3) [ 24.195782] wlan0: RX AssocResp from 00:1a:4f:90:db:37 (capab=0x411 status=0 aid=1) [ 24.205562] wlan0: associated [ 24.205586] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.387503] init: plymouth-upstart-bridge main process ended, respawning [ 24.411892] init: plymouth-upstart-bridge main process ended, respawning [ 28.876099] hda-codec: out of range cmd 0:5:707:ffffffbf [ 49.911456] audit_printk_skb: 12 callbacks suppressed [ 49.911459] type=1400 audit(1416908704.347:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2192 comm="apparmor_parser" [ 49.911465] type=1400 audit(1416908704.347:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2192 comm="apparmor_parser" [ 49.911804] type=1400 audit(1416908704.347:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2192 comm="apparmor_parser" [ 56.008224] firewire_core 0000:02:00.0: rediscovered device fw0 [ 491.067495] firewire_core 0000:02:00.0: rediscovered device fw0 [ 647.429827] systemd-hostnamed[3296]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1331.667535] type=1400 audit(1416909986.597:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3618 comm="apparmor_parser" [ 1331.667543] type=1400 audit(1416909986.597:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3618 comm="apparmor_parser" [ 1331.668094] type=1400 audit(1416909986.597:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3618 comm="apparmor_parser" [ 1536.304653] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 1536.339373] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1536.385212] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 1536.458118] QNX4 filesystem 0.2.3 registered. [ 1536.492447] xor: automatically using best checksumming function: [ 1536.531054] avx : 11981.000 MB/sec [ 1536.603059] raid6: mmxx1 4691 MB/s [ 1536.671051] raid6: mmxx2 5026 MB/s [ 1536.739049] raid6: sse1x1 3876 MB/s [ 1536.807051] raid6: sse1x2 4662 MB/s [ 1536.875042] raid6: sse2x1 7644 MB/s [ 1536.943043] raid6: sse2x2 9585 MB/s [ 1536.943046] raid6: using algorithm sse2x2 (9585 MB/s) [ 1536.943047] raid6: using ssse3x1 recovery algorithm [ 1537.008992] bio: create slab <bio-1> at 1 [ 1537.009184] Btrfs loaded [ 1605.387952] ptrace of pid 1734 was attempted by: pool (pid 17913) [ 1605.656783] ptrace of pid 1797 was attempted by: pool (pid 17910) [ 1605.657260] ptrace of pid 2086 was attempted by: pool (pid 17911) [ 1605.657960] ptrace of pid 2286 was attempted by: pool (pid 17908) [ 1605.659518] ptrace of pid 2202 was attempted by: pool (pid 17910) [ 1605.659738] ptrace of pid 2108 was attempted by: pool (pid 17907) [ 1605.659958] ptrace of pid 3730 was attempted by: pool (pid 17911) [ 1605.661471] ptrace of pid 2103 was attempted by: pool (pid 17915) [ 1605.661704] ptrace of pid 2208 was attempted by: pool (pid 17910) [ 1605.661921] ptrace of pid 2071 was attempted by: pool (pid 17907) [ 1859.522800] firewire_core 0000:02:00.0: rediscovered device fw0 [ 2008.370964] firewire_core 0000:02:00.0: rediscovered device fw0
und auch in der /var/log/syslog (viel code) kein EPSON oder epson. Macht's überhaupt Sinn, uns weiter zu plagen???