staging.inyokaproject.org

also iwconfig sagt immer noch das gleiche. Welches modul meinste???

lsmod | more

wenn ich das eingeben kommt folgendes

root@ubuntu:/home/pinhead # lsmod | more
Module Size Used by
p80211 30736 0
proc_intf 3968 0
freq_table 4356 0
cpufreq_userspace 5336 0
cpufreq_powersave 2048 0
button 6936 0
ac 5132 0
battery 9740 0
ipv6 230020 10
af_packet 20872 2
pppoe 13632 2
pppox 3848 1 pppoe
ppp_generic 27668 6 pppoe,pppox
slhc 7040 1 ppp_generic
8139too 23936 0
8139cp 19072 0
mii 4864 2 8139too,8139cp
crc32 4608 2 8139too,8139cp
snd_via82xx 26660 4
snd_ac97_codec 59268 1 snd_via82xx
snd_pcm_oss 48168 1
snd_mixer_oss 16640 3 snd_pcm_oss
snd_pcm 85540 2 snd_via82xx,snd_pcm_oss
snd_timer 23172 1 snd_pcm
snd_page_alloc 11144 2 snd_via82xx,snd_pcm
gameport 4736 1 snd_via82xx
snd_mpu401_uart 7296 1 snd_via82xx
snd_rawmidi 23232 1 snd_mpu401_uart
snd_seq_device 7944 1 snd_rawmidi
snd 50660 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9824 4 snd
tsdev 7168 0
joydev 9536 0
usbhid 28864 0
uhci_hcd 29328 0
usbcore 104292 4 usbhid,uhci_hcd
pci_hotplug 30640 0
via_agp 8832 1
agpgart 31784 1 via_agp
floppy 54996 0
pcspkr 3816 0
rtc 12216 0
md 44744 0
dm_mod 51068 1
capability 4872 0
commoncap 7168 1 capability
parport_pc 32064 1
lp 10436 0
parport 37320 2 parport_pc,lp
evdev 9088 0
ide_cd 38276 0
cdrom 35872 1 ide_cd
mousedev 10124 1
psmouse 17800 0
ext3 109544 1
jbd 54552 1 ext3
ide_generic 1664 0
via82cxxx 13084 1
ide_disk 16768 3
ide_core 125272 4 ide_cd,ide_generic,via82cxxx,ide_disk
unix 25904 740
fan 4236 0
thermal 13200 0
processor 17712 1 thermal
font 8576 0
vesafb 6688 0
cfbcopyarea 3968 1 vesafb
cfbimgblt 3200 1 vesafb
cfbfillrect 3712 1 vesafb

usambara hat geschrieben:

Hi,
das adm8211 Modul scheint nicht geladen zu sein; nochmal kontrollieren mit

lsmod | grep adm

Falls wirklich nicht geladen nochmal

modprobe adm8211

eingeben und dann versuchen mit

ifup wlan0

das Interface zu starten.
gruß
Usambara

also mit lsmod | grep adm passiert nix auch nachdem ich das modul neu geladen habe.
Und wenn ich ifup wlan0 eingebe kommt folgendes.

root@ubuntu:/home/pinhead # lsmod | grep adm
root@ubuntu:/home/pinhead # modprobe adm8211
root@ubuntu:/home/pinhead # ifup wlan0
wlanctl-ng: No such device
Failed to enable the device, exitcode= 1 .
run-parts: /etc/network/if-pre-up.d/linux-wlan-ng-pre-up exited with return code 1
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; No such device.
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device wlan0 ; No such device.
Internet Systems Consortium DHCP Client V3.0.1rc14
Copyright 2004 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

ppp0: unknown hardware address type 512
sit0: unknown hardware address type 776
SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
ppp0: unknown hardware address type 512
sit0: unknown hardware address type 776
Bind socket to interface: No such device
Failed to bring up wlan0.
root@ubuntu:/home/pinhead #

usambara hat geschrieben:

mal ne blöde Frage? Machst Du das Ganze als normaler User?
Usambara

hehe ne, soo doof bin ich nit, ahb auch direkt das root passwort vergeben.

root@ubuntu:/home/pinhead # lsmod | grep adm

p.s. so wie es aussieht ist das modul geladen
lsmod

adm8211 51968 0
.......

hmm , immer noch das gleiche:

root@ubuntu:/home/pinhead # ifup wlan0
wlanctl-ng: No such device
Failed to enable the device, exitcode= 1 .
run-parts: /etc/network/if-pre-up.d/linux-wlan-ng-pre-up exited with return code 1
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; No such device.
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device wlan0 ; No such device.
Internet Systems Consortium DHCP Client V3.0.1rc14
Copyright 2004 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP

ppp0: unknown hardware address type 512
sit0: unknown hardware address type 776
SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
ppp0: unknown hardware address type 512
sit0: unknown hardware address type 776
Bind socket to interface: No such device
Failed to bring up wlan0.

hat auch nit geklappt, trotzdem fettes danke schön 😀 für deine hilfe. Ich versuchs noch mit anderen modulen (realtek/prism).
nochmasls dankeeee.