D-Link DWA-140 wird nicht erkannt › Netzwerk und Internetzugang einrichten › Systemverwaltung, Installation, Aktualisierung › Forum › staging.inyokaproject.org

D-Link DWA-140 wird nicht erkannt

« Vorherige 1 2…78Nächste »

Status: Gelöst | Ubuntu-Version: Ubuntu 9.10 (Karmic Koala)
Antworten |

elektronenblitz63 Anmeldungsdatum: 16. Januar 2007 Beiträge: 29307	Zitieren 1. April 2012 17:48 Hallo, das Modul wurde ja gebaut und liegt in /home/chintter-iv/angepasster-2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/rt3370sta.ko Kann man also auch manuell kopieren und einbinden. sudo cp /home/chintter-iv/angepasster-2010_0831_RT3070_Linux_STA_v2.4.0.1_DPO/os/linux/rt3370sta.ko /lib/modules/$(uname -r)/kernel/drivers/net/wireless/ sudo depmod -a sudo update-initramfs -u modinfo rt3370sta
Chintter Anmeldungsdatum: 31. Dezember 2011 Beiträge: 73	Zitieren 1. April 2012 18:36 Hat geklappt danke lsmod dmesg \| egrep 'rt2\|rt3' sudo iwlist scan cat /var/lib/NetworkManager/NetworkManager.state rfkill list chintter-iv@chintter-iv-laptop:~$ lsmod Module Size Used by ipv6 301244 10 rfcomm 43753 4 ppdev 7877 0 lp 9304 0 parport 39110 2 ppdev,lp sco 10677 2 bridge 58054 0 stp 2244 1 bridge bnep 12795 2 l2cap 37148 16 rfcomm,bnep therm_adt746x 10133 0 apm_emu 1468 0 apm_emulation 7311 2 apm_emu snd_aoa_i2sbus 20791 0 snd_powermac 68343 6 snd_pcm_oss 47872 0 snd_mixer_oss 19382 3 snd_pcm_oss snd_pcm 87159 3 snd_aoa_i2sbus,snd_powermac,snd_pcm_oss snd_seq_dummy 1766 0 snd_seq_oss 36288 0 snd_seq_midi 6161 0 snd_rawmidi 24746 1 snd_seq_midi snd_seq_midi_event 7367 2 snd_seq_oss,snd_seq_midi snd_seq 61897 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24531 2 snd_pcm,snd_seq snd_seq_device 7524 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq nouveau 546990 1 snd 70676 18 snd_aoa_i2sbus,snd_powermac,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device usbhid 44254 0 ttm 62726 1 nouveau btusb 13483 2 drm_kms_helper 31243 1 nouveau rt3370sta 657898 0 hid 78748 1 usbhid bluetooth 64147 9 rfcomm,sco,bnep,l2cap,btusb rfkill 20725 2 bluetooth evdev 10257 9 pmac_zilog 18110 0 serial_core 23813 1 pmac_zilog rtc_generic 1391 0 snd_aoa_soundbus 4916 1 snd_aoa_i2sbus soundcore 7534 3 snd uninorth_agp 8437 1 drm 194088 3 nouveau,ttm,drm_kms_helper agpgart 39983 3 ttm,uninorth_agp,drm snd_page_alloc 7660 1 snd_pcm ohci1394 35584 0 sungem 32704 0 sungem_phy 12365 1 sungem ieee1394 97330 1 ohci1394 windfarm_core 10420 0 chintter-iv@chintter-iv-laptop:~$ dmesg \| egrep 'rt2\|rt3' [ 19.136725] ===>rt2870_probe()! [ 19.144416] <===rt2870_probe()! [ 19.144559] usbcore: registered new interface driver rt2870 [ 219.683554] !!! rt28xx Initialized fail !!! [ 219.683560] rt28xx_open return fail! [ 221.081694] !!! rt28xx Initialized fail !!! [ 221.081699] rt28xx_open return fail! [ 619.867628] ===>rt2870_probe()! [ 619.888371] <===rt2870_probe()! [ 621.781300] !!! rt28xx Initialized fail !!! [ 621.781306] rt28xx_open return fail! [ 624.834459] !!! rt28xx Initialized fail !!! [ 624.834466] rt28xx_open return fail! [ 624.834878] rt28xx_get_wireless_stats ---> [ 820.174244] rt28xx_get_wireless_stats ---> [ 3275.523603] ===>rt2870_probe()! [ 3275.536580] <===rt2870_probe()! [ 3277.332203] !!! rt28xx Initialized fail !!! [ 3277.332209] rt28xx_open return fail! [ 3279.487857] !!! rt28xx Initialized fail !!! [ 3279.487864] rt28xx_open return fail! [ 3311.962077] rt28xx_get_wireless_stats ---> [ 3357.134489] rt28xx_get_wireless_stats ---> [ 3453.463449] ===>rt2870_probe()! [ 3453.476132] <===rt2870_probe()! [ 3454.933942] !!! rt28xx Initialized fail !!! [ 3454.933948] rt28xx_open return fail! [ 3456.558224] !!! rt28xx Initialized fail !!! [ 3456.558230] rt28xx_open return fail! chintter-iv@chintter-iv-laptop:~$ sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. pan0 Interface doesn't support scanning. chintter-iv@chintter-iv-laptop:~$ cat /var/lib/NetworkManager/NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true chintter-iv@chintter-iv-laptop:~$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no chintter-iv@chintter-iv-laptop:~$ Habe den Überblick verloren was jetzt gemacht werden soll
praseodym Supporter Anmeldungsdatum: 9. Februar 2009 Beiträge: 22076	Zitieren 1. April 2012 18:37 "modinfo" fehlt noch. Das Modul wird ja eigentlich auch geladen.
elektronenblitz63 Anmeldungsdatum: 16. Januar 2007 Beiträge: 29307	Zitieren 1. April 2012 18:42 Funktioniert wohl nicht, wenn man sich die Fehlermeldungen so ansieht.
Chintter Anmeldungsdatum: 31. Dezember 2011 Beiträge: 73	Zitieren 1. April 2012 18:54 chintter-iv@chintter-iv-laptop:~$ modinfo rt3370sta filename: /lib/modules/2.6.32-40-powerpc/kernel/drivers/net/wireless/rt3370sta.ko version: 2.4.0.1 license: GPL description: RT2870 Wireless Lan Linux Driver author: Paul Lin <paul_lin@ralinktech.com> srcversion: A3A8F4C24597EB207F44987 alias: usb:v0DF6p0050ddcdscdpiciscip* alias: usb:v148Fp3370ddcdscdpiciscip* alias: usb:v0DB0p871Bddcdscdpiciscip* alias: usb:v0DB0p822Bddcdscdpiciscip* alias: usb:v0789p0166ddcdscdpiciscip* alias: usb:v07FAp7712ddcdscdpiciscip* alias: usb:v13D3p3321ddcdscdpiciscip* alias: usb:v13D3p3307ddcdscdpiciscip* alias: usb:v083ApA703ddcdscdpiciscip* alias: usb:v5A57p0282ddcdscdpiciscip* alias: usb:v0DB0p821Addcdscdpiciscip* alias: usb:v0DB0p3821ddcdscdpiciscip* alias: usb:v0DB0p822Addcdscdpiciscip* alias: usb:v0DB0p871Addcdscdpiciscip* alias: usb:v0DB0p3871ddcdscdpiciscip* alias: usb:v0DB0p3822ddcdscdpiciscip* alias: usb:v0DB0p6899ddcdscdpiciscip* alias: usb:v0DB0p870Addcdscdpiciscip* alias: usb:v0DB0p3870ddcdscdpiciscip* alias: usb:v0DB0p899Addcdscdpiciscip* alias: usb:v203Dp14A9ddcdscdpiciscip* alias: usb:v0B05p1784ddcdscdpiciscip* alias: usb:v20B8p8888ddcdscdpiciscip* alias: usb:v203Dp1480ddcdscdpiciscip* alias: usb:v04BBp0948ddcdscdpiciscip* alias: usb:v04BBp0947ddcdscdpiciscip* alias: usb:v04BBp0945ddcdscdpiciscip* alias: usb:v5A57p0283ddcdscdpiciscip* alias: usb:v5A57p5257ddcdscdpiciscip* alias: usb:v1D4Dp0011ddcdscdpiciscip* alias: usb:v1D4Dp000Eddcdscdpiciscip* alias: usb:v1D4Dp000Cddcdscdpiciscip* alias: usb:v07D1p3C17ddcdscdpiciscip* alias: usb:v07D1p3C16ddcdscdpiciscip* alias: usb:v07D1p3C0Fddcdscdpiciscip* alias: usb:v07D1p3C0Eddcdscdpiciscip* alias: usb:v07D1p3C0Dddcdscdpiciscip* alias: usb:v07D1p3C0Addcdscdpiciscip* alias: usb:v1EDAp2310ddcdscdpiciscip* alias: usb:v1A32p0304ddcdscdpiciscip* alias: usb:v7392p7711ddcdscdpiciscip* alias: usb:v07B8p3072ddcdscdpiciscip* alias: usb:v07B8p3071ddcdscdpiciscip* alias: usb:v07B8p3070ddcdscdpiciscip* alias: usb:v2019p5201ddcdscdpiciscip* alias: usb:v2019pAB25ddcdscdpiciscip* alias: usb:v1044p800Dddcdscdpiciscip* alias: usb:v13D3p3305ddcdscdpiciscip* alias: usb:v13D3p3273ddcdscdpiciscip* alias: usb:v1740p9709ddcdscdpiciscip* alias: usb:v1740p9708ddcdscdpiciscip* alias: usb:v1740p9707ddcdscdpiciscip* alias: usb:v1740p9706ddcdscdpiciscip* alias: usb:v1740p9705ddcdscdpiciscip* alias: usb:v1740p9703ddcdscdpiciscip* alias: usb:v083ApA702ddcdscdpiciscip* alias: usb:v083ApA701ddcdscdpiciscip* alias: usb:v083Ap7511ddcdscdpiciscip* alias: usb:v18C5p0012ddcdscdpiciscip* alias: usb:v14B2p3C12ddcdscdpiciscip* alias: usb:v0DF6p0047ddcdscdpiciscip* alias: usb:v0DF6p0048ddcdscdpiciscip* alias: usb:v0DF6p0042ddcdscdpiciscip* alias: usb:v0DF6p003Eddcdscdpiciscip* alias: usb:v0DB0p822Bddcdscdpiciscip* alias: usb:v0DB0p871Bddcdscdpiciscip* alias: usb:v0DB0p822Cddcdscdpiciscip* alias: usb:v0DB0p871Cddcdscdpiciscip* alias: usb:v0DB0p3820ddcdscdpiciscip* alias: usb:v148Fp3072ddcdscdpiciscip* alias: usb:v148Fp3071ddcdscdpiciscip* alias: usb:v148Fp3070ddcdscdpiciscip* depends: vermagic: 2.6.32-40-powerpc mod_unload modversions parm: mac:rt28xx: wireless mac addr (charp) chintter-iv@chintter-iv-laptop:~$ Okay dann wird das wohl nichts 😢 Danke Euch für die Super Unterstützung 👍
praseodym Supporter Anmeldungsdatum: 9. Februar 2009 Beiträge: 22076	Zitieren 1. April 2012 19:32 Sehr merkwürdig. Installiere mal noch die Firmware von 11.04: http://de.archive.ubuntu.com/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.52_all.deb Neu starten danach
Chintter Anmeldungsdatum: 31. Dezember 2011 Beiträge: 73	Zitieren 4. April 2012 16:36 (zuletzt bearbeitet: 4. April 2012 17:53) Hat auch nicht geklappt Es gibt ja noch eine Anleitung die was mit den UDEV macht die Klappt auch nicht? Quellen-Anfang Variante B - Geräte-ID zum System hinzufügen Sollte das nicht funktionieren, gibt es eine zweite Möglichkeit. Mit einen kleinen Trick kann die benötigte Geräte ID zum System hinzugefügt werden. Dann wird der Systemtreiber rt2870sta verwendet. Sofern installiert muss zuvor der selbst gebaute Treiber V2.3.0.0 wieder entfernt werden. Treiber entfernen wenn manuell kompiliert und in das System eingebunden: cd cd RT2870_LinuxSTA_V2.3.0.0 sudo make uninstall Geräte-ID hinzufügen: echo 'install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "1737 0078" > /sys/bus/usb/drivers/rt2870/new_id' \| sudo tee /etc/modprobe.d/rt2870sta.conf 07d1 3c0f Was ich machen muss: echo 'install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "07d1 3c0f" > /sys/bus/usb/drivers/rt2870/new_id' \| sudo tee /etc/modprobe.d/rt2870sta.conf oder muss das so sein???:Alles nur Geraten echo 'install rt3370sta modprobe --ignore-install rt3370sta ; /bin/echo "07d1 3c0f" > /sys/bus/usb/drivers/ rt3370/new_id' \| sudo tee /etc/modprobe.d/ rt3370sta.conf Testen: sudo modprobe -rf rt2870sta sudo modprobe -v rt2870sta dmesg \| egrep 'rt28\|usb\|Phy' iwconfig Treiber automatisch laden: echo rt2870sta \| sudo tee -a /etc/modules oder eleganter wenn der Stick tatsächlich verwendet wird mittels udev-Regel: sudo gedit /etc/udev/rules.d/10-wusb100.rules Inhalt: # UDEV-Rule for wusb-100v2 ID 1737:0078 SUBSYSTEM=="usb", ATTR{idVendor}=="1737", ATTR{idProduct}=="0078", RUN+="/sbin/modprobe rt2870sta" Udev-System neu laden sudo service udev reload Quelle:http://forum.ubuntuusers.de/post/2264257/ Quellen-Ende Was ist den Damit? Mit dem Befehl sollte man doch schauen können b.z.w die WLAN Kanäle für Deutschland einstellen. Weil unten Channel 0 steht? chintter@chintter-laptop:~$ sudo iw reg set DE [sudo] password for chintter: nl80211 not found. Gibt es überhaupt einen Channel 0? Naja Blinken Tut der WLAN-Stick auch nicht chintter@chintter-laptop:~$ iwlist chan lo no frequency information. eth0 no frequency information. ra0 0 channels pan0 no frequency information. Ob das Richtig war? habe überall rt3370sta eingefügt und es hat irgendwas gemacht chintter@chintter-laptop:~$ cd chintter@chintter-laptop:~$ cd RT2870_LinuxSTA_V2.3.0.0 bash: cd: RT2870_LinuxSTA_V2.3.0.0: Datei oder Verzeichnis nicht gefunden chintter@chintter-laptop:~$ echo 'install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "1737 0078" > /sys/bus/usb/drivers/rt2870/new_id' \| sudo tee /etc/modprobe.d/rt2870sta.conf [sudo] password for chintter: install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "1737 0078" > /sys/bus/usb/drivers/rt2870/new_id chintter@chintter-laptop:~$ sudo modprobe -rf rt2870sta FATAL: Module rt2870sta not found. chintter@chintter-laptop:~$ cat /etc/modules # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. snd_powermac apm_emu snd-powermac therm_adt746x chintter@chintter-laptop:~$ grep rt2 /etc/modprobe.d/* /etc/modprobe.d/blacklist.conf:blacklist rt2800usb /etc/modprobe.d/blacklist.conf:blacklist rt2870sta /etc/modprobe.d/rt2870sta.conf:install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "1737 0078" > /sys/bus/usb/drivers/rt2870/new_id chintter@chintter-laptop:~$ ls -l /etc/modprobe.d/ insgesamt 32 -rw-r--r-- 1 root root 2386 2010-01-29 01:01 alsa-base.conf -rw-r--r-- 1 root root 325 2010-04-14 06:30 blacklist-ath_pci.conf -rw-r--r-- 1 root root 1643 2012-04-02 18:42 blacklist.conf -rw-r--r-- 1 root root 213 2010-04-14 06:30 blacklist-firewire.conf -rw-r--r-- 1 root root 660 2010-04-14 06:30 blacklist-framebuffer.conf -rw-r--r-- 1 root root 156 2010-01-29 01:01 blacklist-modem.conf lrwxrwxrwx 1 root root 41 2012-04-02 16:48 blacklist-oss.conf -> /lib/linux-sound-base/noOSS.modprobe.conf -rw-r--r-- 1 root root 1077 2010-04-14 06:30 blacklist-watchdog.conf lrwxrwxrwx 1 root root 21 2012-04-02 16:48 oss-compat.conf -> /lib/oss-compat/linux -rw-r--r-- 1 root root 115 2012-04-04 16:57 rt2870sta.conf chintter@chintter-laptop:~$ echo 'install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "07d1 3c0f" > /sys/bus/usb/drivers/rt2870/new_id' \| sudo tee /etc/modprobe.d/rt2870sta.conf [sudo] password for chintter: install rt2870sta modprobe --ignore-install rt2870sta ; /bin/echo "07d1 3c0f" > /sys/bus/usb/drivers/rt2870/new_id chintter@chintter-laptop:~$ sudo modprobe -rf rt2870sta FATAL: Module rt2870sta not found. chintter@chintter-laptop:~$ echo 'install rt3370sta modprobe --ignore-install rt3370sta ; /bin/echo "07d1 3c0f" > /sys/bus/usb/drivers/ rt3370/new_id' \| sudo tee /etc/modprobe.d/ rt3370sta.conf tee: /etc/modprobe.d/: Ist ein Verzeichnis install rt3370sta modprobe --ignore-install rt3370sta ; /bin/echo "07d1 3c0f" > /sys/bus/usb/drivers/ rt3370/new_id chintter@chintter-laptop:~$ sudo modprobe -rf rt3370sta chintter@chintter-laptop:~$ sudo modprobe -v rt3370sta insmod /lib/modules/2.6.32-40-powerpc/kernel/drivers/net/wireless/rt3370sta.ko chintter@chintter-laptop:~$ dmesg \| egrep 'rt33\|usb\|Phy' [ 0.031209] usbcore: registered new interface driver usbfs [ 0.031253] usbcore: registered new interface driver hub [ 0.031368] usbcore: registered new device driver usb [ 4.056212] usb usb1: configuration #1 chosen from 1 choice [ 4.131693] usb usb2: configuration #1 chosen from 1 choice [ 4.207670] usb usb3: configuration #1 chosen from 1 choice [ 4.283690] usb usb4: configuration #1 chosen from 1 choice [ 4.368067] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 4.525621] usb 1-1: configuration #1 chosen from 1 choice [ 4.944071] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 5.148313] usb 2-1: configuration #1 chosen from 1 choice [ 5.451972] usb 4-1: new low speed USB device using ohci_hcd and address 2 [ 5.663326] usb 4-1: configuration #1 chosen from 1 choice [ 5.715455] usbcore: registered new interface driver hiddev [ 5.723190] input: PS/2+USB Mouse as /devices/pci0001:10/0001:10:1b.1/usb4/4-1/4-1:1.0/input/input5 [ 5.723641] generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0001:10:1b.1-1/input0 [ 5.723722] usbcore: registered new interface driver usbhid [ 5.724064] usbhid: v2.6:USB HID core driver [ 25.779147] rtusb init ---> [ 25.822747] usbcore: registered new interface driver rt2870 [ 26.390078] usbcore: registered new interface driver btusb [ 5513.107117] usb 1-1: USB disconnect, address 2 [ 5513.107396] rtusb_disconnect: unregister usbnet usb-0001:10:1b.2-1 [ 5516.899961] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 5517.050401] usb 1-1: configuration #1 chosen from 1 choice [ 6190.829476] usbcore: deregistering interface driver rt2870 [ 6190.829564] rtusb_disconnect: unregister usbnet usb-0001:10:1b.2-1 [ 6190.845663] <--- rtusb exit [ 6213.391667] rtusb init ---> [ 6213.409455] usbcore: registered new interface driver rt2870 chintter@chintter-laptop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. ra0 Ralink STA chintter@chintter-laptop:~$ echo rt3370sta \| sudo tee -a /etc/modules rt3370sta Habe versucht Manuell diesen Eintrag zu machen im UDEV Ordner also die Datei # UDEV-Rule for wusb-100v2 ID 07d1:3c0f SUBSYSTEM=="usb", ATTR{idVendor}=="07d1", ATTR{idProduct}=="3c0f", RUN+="/sbin/modprobe rt3370sta" Stehen tut das drin # This file maintains persistent names for network interfaces. # See udev(7) for syntax. # # Entries are automatically added by the 75-persistent-net-generator.rules # file; however you are also free to add your own entries. # PCI device 0x106b:0x0032 (gem) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?", ATTR{address}=="00:0a:95:e6:79:42", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth", NAME="eth0" # USB device 0x07d1:0x3c0f (usb) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?", ATTR{address}=="34:08:04:99:fb:e0", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan", NAME="wlan0" # USB device 0x07d1:0x3c0f (usb) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?", ATTR{address}=="08:34:99:04:e0:fb", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="ra", NAME="ra0" Bilder Download root.png
Heart Anmeldungsdatum: 9. Juni 2005 Beiträge: 82	Zitieren 17. Januar 2017 17:28 Gibt wohl mit 16.04 Probleme, wenn man über die GUI sich mit einem Netzwerk verbindet. Wenn man nmtui im Terminal nutzt, klappt es ohne Probleme! In meinem Fall war es ein 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter USB WLAN Stick Siehe https://ubuntuforums.org/showthread.php?t=2349676&p=13595655#post13595655 I've found the following http://askubuntu.com/questions/761532/clean-install-ubuntu-16-04-cannot-connect-to-wifi-using-networkmanager-but-nmtu @Mesaph describes there exactly my phenomenon (with a totally different wlan dongle) Summary Try to connect to my network using the GUI and enter my wlan password doesn't work, nothing happens. I see no attempt to connect to this network, and I don't get an error either. Using nmtui in the terminal, activate my wlan connection, set wlan password there, voila everything works!!!! Here is the syslog from starting nmtui, deleting every wlan entry there first and making/activating a connection to my wlan router (and deactivate the cable connection finally in nmtui tool): https://glot.io/snippets/em9rtktgum So this is a known (!?) problem in 16.04?

« Vorherige 1 2…78Nächste »

Antworten |

« Vorheriges Thema Nächstes Thema »