staging.inyokaproject.org

Hallo,

hat jemand diese Wlan Karte zu laufen bekommen unter 10.04 ? Wenn ja wäre es nett wenn er mir kurz schreiben könnte wie...

Thx

Poste alle Terminal-Ausgaben aus diesem Thread in Codeblöcken zur "Diagnose".

Gruss

praseodym

Hallo,

diese Daten in Codeblöcke sollten wir schon haben.

Gruß

bsn

Mit welchem Befehl bekomme ich die Infos?

Alle, die dort in den grauen Kästen stehen 😉 Schliesslich muss es nicht am Treiber o. Ä. liegen

Hallo,

wurde zwei mal verlinkt! Klicke auf das verlinkte, dort wird alles erklärt.

Gruß

bsn

scholli@3u2zig:~$ uname -a

Linux 3u2zig 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 23:42:43 UTC 2011 x86_64 GNU/Linux

scholli@3u2zig:~$ lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0104] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge PCI Express Root Port [8086:0101] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b4)
00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 2 [8086:1c12] (rev b4)
00:1c.2 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 3 [8086:1c14] (rev b4)
00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 4 [8086:1c16] (rev b4)
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1c49] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Cougar Point 6 port SATA AHCI Controller [8086:1c03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 04)
01:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0dd1] (rev a1)
01:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be9] (rev a1)
02:00.0 USB Controller [0c03]: NEC Corporation Device [1033:0194] (rev 03)
03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05)
03:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 90)
03:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 90)
03:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2393] (rev 90)
04:00.0 Network controller [0280]: Intel Corporation Device [8086:0091] (rev 34)
05:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30)

scholli@3u2zig:~$ lspci -nn | grep -i net A2

grep: A2: No such file or directory

scholli@3u2zig:~$ lspci -nn | grep -i net -A2

03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05)
03:00.1 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2392] (rev 90)
03:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2391] (rev 90)
--
04:00.0 Network controller [0280]: Intel Corporation Device [8086:0091] (rev 34)
05:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30)

scholli@3u2zig:~$ pccardctl info scholli@3u2zig:~$ lsusb

Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 5986:0343 Acer, Inc 
Bus 002 Device 003: ID 147e:1001 Upek 
Bus 002 Device 002: ID 8087:0024  
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

scholli@3u2zig:~$ egrep -v "^$|^#" /etc/network/interfaces

auto lo
iface lo inet loopback

scholli@3u2zig:~$ egrep -v "^$|^#" /etc/resolv.conf

domain Speedport_W_722V_Typ_B
search Speedport_W_722V_Typ_B
nameserver 192.168.111.1

scholli@3u2zig:~$ cat /etc/hosts

127.0.0.1	localhost
127.0.1.1	3u2zig

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

scholli@3u2zig:~$ cat /etc/network/interfaces

auto lo
iface lo inet loopback

scholli@3u2zig:~$ cat /etc/resolv.conf

# Generated by NetworkManager
domain Speedport_W_722V_Typ_B
search Speedport_W_722V_Typ_B
nameserver 192.168.111.1

scholli@3u2zig:~$ cat /etc/hosts

127.0.0.1	localhost
127.0.1.1	3u2zig

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

scholli@3u2zig:~$ ifconfig

eth0      Link encap:Ethernet  Hardware Adresse 00:90:f5:b3:07:8a  
          inet Adresse:192.168.111.105  Bcast:192.168.111.255  Maske:255.255.255.0
          inet6-Adresse: fe80::290:f5ff:feb3:78a/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1
          RX packets:4165 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1680 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:1000 
          RX bytes:1771707 (1.7 MB)  TX bytes:280716 (280.7 KB)
          Interrupt:35 

lo        Link encap:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metrik:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          Kollisionen:0 Sendewarteschlangenlänge:0 
          RX bytes:960 (960.0 B)  TX bytes:960 (960.0 B)

scholli@3u2zig:~$ route -n

Kernel-IP-Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
192.168.111.0   0.0.0.0         255.255.255.0   U     1      0        0 eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth0
0.0.0.0         192.168.111.1   0.0.0.0         UG    0      0        0 eth0

scholli@3u2zig:~$ iwconfig

lo        no wireless extensions.

eth0      no wireless extensions.

scholli@3u2zig:~$ ping -c 4 www.ubuntuusers.de

PING ubuntuusers.de (213.95.41.13) 56(84) bytes of data.
64 bytes from ubuntuusers.de (213.95.41.13): icmp_seq=1 ttl=57 time=27.1 ms
64 bytes from ubuntuusers.de (213.95.41.13): icmp_seq=2 ttl=57 time=26.4 ms
64 bytes from ubuntuusers.de (213.95.41.13): icmp_seq=3 ttl=57 time=26.0 ms
64 bytes from ubuntuusers.de (213.95.41.13): icmp_seq=4 ttl=57 time=27.2 ms

--- ubuntuusers.de ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 26.034/26.729/27.274/0.542 ms

scholli@3u2zig:~$ ping -c 4 213.95.41.11

PING 213.95.41.11 (213.95.41.11) 56(84) bytes of data.
64 bytes from 213.95.41.11: icmp_seq=1 ttl=57 time=26.3 ms
64 bytes from 213.95.41.11: icmp_seq=2 ttl=57 time=26.7 ms
64 bytes from 213.95.41.11: icmp_seq=3 ttl=57 time=26.9 ms
64 bytes from 213.95.41.11: icmp_seq=4 ttl=57 time=26.5 ms

--- 213.95.41.11 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 26.340/26.642/26.961/0.288 ms

scholli@3u2zig:~$ iwlist chan

lo        no frequency information.

eth0      no frequency information.

scholli@3u2zig:~$ sudo iwlist scan

[sudo] password for scholli: 
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

scholli@3u2zig:~$ rfkill list scholli@3u2zig:~$ lsmod

Module                  Size  Used by
ndiswrapper           244800  0 
nls_utf8                1421  1 
isofs                  33399  1 
joydev                 11104  0 
binfmt_misc             7960  1 
snd_hda_codec_realtek   279072  0 
ppdev                   6375  0 
snd_hda_intel          25741  2 
snd_hda_codec          85759  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6924  1 snd_hda_codec
snd_pcm_oss            41394  0 
snd_mixer_oss          16299  1 snd_pcm_oss
snd_pcm                87946  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1782  0 
snd_seq_oss            31191  0 
snd_seq_midi            5829  0 
snd_rawmidi            23420  1 snd_seq_midi
snd_seq_midi_event      7267  2 snd_seq_oss,snd_seq_midi
snd_seq                57481  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              23649  2 snd_pcm,snd_seq
uvcvideo               62819  0 
fbcon                  39270  71 
snd_seq_device          6888  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
videodev               40518  1 uvcvideo
tileblit                2487  1 fbcon
v4l1_compat            15495  2 uvcvideo,videodev
font                    8053  1 fbcon
v4l2_compat_ioctl32    11892  1 videodev
bitblit                 5811  1 fbcon
snd                    71251  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
nvidia              10832442  40 
softcursor              1565  1 bitblit
sdhci_pci               6700  0 
video                  20623  0 
output                  2503  1 video
vga16fb                12757  1 
vgastate                9857  1 vga16fb
psmouse                64576  0 
jme                    31333  0 
serio_raw               4918  0 
xhci                   41830  0 
mii                     5237  1 jme
soundcore               8052  1 snd
snd_page_alloc          8500  2 snd_hda_intel,snd_pcm
sdhci                  17928  1 sdhci_pci
led_class               3764  1 sdhci
lp                      9336  0 
parport                37160  2 ppdev,lp
ohci1394               30260  0 
ieee1394               94771  1 ohci1394
ahci                   37870  3 

scholli@3u2zig:~$ dmesg | egrep 'net|eth|sky|sis|via|3c3|3c5|e100|8139|8169|acx|air|ath|ar91|atme|at7|herm|iwl|ipw|rtl8|r81|rt2|rt6|rt7|tg3|ssb|wl|b43|b44|ori|pri|p5|zd|ndis'

[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u262144
[    0.000000] pcpu-alloc: s91544 r8192 d23144 u262144 alloc=1*2097152
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.005703] Initializing cgroup subsys net_cls
[    0.005741] CPU0: Thermal monitoring enabled (TM1)
[    0.637120] CPU1: Thermal monitoring enabled (TM1)
[    0.816884] CPU2: Thermal monitoring enabled (TM1)
[    0.816977] CPU2: Intel(R) Core(TM) i7-2920XM CPU @ 2.50GHz stepping 07
[    0.816983] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.996647] CPU3: Thermal monitoring enabled (TM1)
[    1.176415] CPU4: Thermal monitoring enabled (TM1)
[    1.356173] CPU5: Thermal monitoring enabled (TM1)
[    1.535937] CPU6: Thermal monitoring enabled (TM1)
[    1.715701] CPU7: Thermal monitoring enabled (TM1)
[    1.858005] audit: initializing netlink socket (disabled)
[    3.474366] thermal LNXTHERM:01: registered as thermal_zone0
[    3.474382] ACPI: Thermal Zone [THM0] (66 C)
[    3.478845] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.534199] device-mapper: multipath: version 1.1.0 loaded
[    3.534201] device-mapper: multipath round-robin: version 1.0.0 loaded
[   10.609196] Adding 10173432k swap on /dev/sda5.  Priority:-1 extents:1 across:10173432k SS
[   10.647094] jme: JMicron JMC2XX ethernet driver version 1.0.5
[   10.655800] eth0: JMC250 Gigabit Ethernet ver:35 rev:5 macaddr:00:90:f5:b3:07:8a
[   10.743566] eth0: Link is down.
[   10.743946] eth0: Link is down.
[   10.744894] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.906398] ACPI Error (dswload-0781): [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS
[   10.906406] ACPI Error (psparse-0537): Method parse/execution failed [\FREQ] (Node ffff88040dc55be0), AE_ALREADY_EXISTS
[   10.906411] ACPI: Marking method FREQ as Serialized because of AE_ALREADY_EXISTS error
[   10.906447] ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THM0._TMP] (Node ffff88040dc55b60), AE_ALREADY_EXISTS
[   10.906453] ACPI: Marking method _TMP as Serialized because of AE_ALREADY_EXISTS error
[   17.931379] eth0: Link is up at ANed: 1000 Mbps, Full-Duplex, MDI.
[   17.932226] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.965815] eth0: no IPv6 routers present
[ 1835.861396] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 1835.888628] usbcore: registered new interface driver ndiswrapper

scholli@3u2zig:~$ cat /var/lib/NetworkManager/NetworkManager.state

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

scholli@3u2zig:~$ cat /var/lib/NetworkManager/NetworkManager.state

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

scholli@3u2zig:~$ cat /etc/NetworkManager/nm-system-settings.conf

# This file is installed into /etc/NetworkManager, and is loaded by 
# NetworkManager by default.  To override, specify: '--config file' 
# during NM startup.  This can be done by appending to DAEMON_OPTS in 
# the file:
#
# /etc/default/NetworkManager
#

[main]
plugins=ifupdown,keyfile

[ifupdown]
managed=false

scholli@3u2zig:~$ 

Das so richtig?

Ja, zeig noch:

lspci -nnk | grep -i net -A2
cat /etc/modprobe.d/ndiswrapper
ndiswrapper -l

Die ID 8086:0091 ist in keinem üblichen Intel-Treiber enthalten (und es findet sich auch nichts darüber). Deshalb meine ich, dass der Ansatz mit WLAN/ndiswrapper richtig sein sollte. Windowstreiber entsprechend der Architektur (32 oder 64bit) nach Wiki-Anleitung probieren. Ndiswrapper 1.55 kannst du durch 1.56 ersetzen. Im Zweifel selbst kompilieren.

scholli@3u2zig:~$ lspci -nnk | grep -i net -A2

03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05)
	Kernel driver in use: jme
	Kernel modules: jme
--
04:00.0 Network controller [0280]: Intel Corporation Device [8086:0091] (rev 34)
05:00.0 FireWire (IEEE 1394) [0c00]: JMicron Technology Corp. IEEE 1394 Host Controller [197b:2380] (rev 30)
	Kernel driver in use: ohci1394

scholli@3u2zig:~$ cat /etc/modprobe.d/ndiswrapper ndiswrapper -l

cat: invalid option -- 'l'
„cat --help“ gibt weitere Informationen.

scholli@3u2zig:~$

Die letzten beiden Befehle einzeln

ich setze sie heute spät abend noch rein. muss jetzt leider abbrechen. sehe mich schon wieder bei windows:-(

Hallo,
Du benötigst für diese Karte die aktuellsten Intel-Treiber.

04:00.0 Network controller [0280]: Intel Corporation Device [8086:0091] (rev 34)

Installiere das aktuelle Treiberpaket von Linux Wireless.

sudo apt-get install --reinstall linux-headers-$(uname -r) build-essential 

# Download Treiberarchiv / auf den Fortschrittsbalken achten !
wget http://www.orbit-lab.org/kernel/compat-wireless-2.6/compat-wireless-2.6.tar.bz2

# unvollständiges Archiv löschen und Befehl wiederholen, scheitert der Download beim ersten Versuch
rm -r compat-wireless-2.6.tar.bz2
  
# Installation ansonsten hier fortsetzen:
tar jxvf compat-wireless-2.6.tar.bz2
cd compat-wireless-20*

# Vorauswahl für Intel-Karten nur bei Bedarf und entsprechender Hardware ausführen
./scripts/driver-select iwlagn         ## Vorauswahl für Intel basierende Treibermodule treffen / funktioniert leider nicht immer
./scripts/driver-select restore        ## werden die benötigten Module für Intel-Karten nicht gebaut, Vorauswahl aufheben

make
sudo make install 

echo "blacklist iwlagn" | sudo tee -a /etc/modprobe.d/blacklist.conf
sudo modprobe -rfv iwlagn 

wget http://elektronenblitz63.de/downloads/compat-wireless-2011-10-29_patched_ubuntu_noBT.tar.gz
tar xvf compat-wireless-2011-10-29_patched_ubuntu_noBT.tar.gz 
cd compat-wireless-2011-10-29_patched_ubuntu_noBT
make
sudo make install  

sudo modprobe iwlwifi      # nur Ubuntu 10.04
ifconfig
iwconfig
iwlist chan
sudo iwlist scan  

cd compat-wireless-20*
make clean
make
sudo make install  

wget http://media.cdn.ubuntu-de.org/forum/attachments/49/23/2767012-Intel_Firmware.tar.gz
sudo tar xvf 2767012-Intel_Firmware.tar.gz -C /lib/firmware        # direkt nach /lib/firmware entpacken  

Danke elektronenblitz63,

das war die Lösung!

Prima!

Nach einem Kernelupdate muss nur der Treiber erneut installiert werden, die Prozedur also ab cd compat-wireless-20* wiederholen. Die Firmware ist dauerhaft im System für alle Kernelversionen verankert.

Dann könnte dieser Beitrag noch von Interesse sein.