Terratec Cinergy Hybrid XS FM ID 0ccd:0072 --> Analog TV geht aber kein DVB-T › Multimedia › Ubuntu verwenden › Forum › staging.inyokaproject.org

Terratec Cinergy Hybrid XS FM ID 0ccd:0072 --> Analog TV geht aber kein DVB-T

« Vorherige12 Nächste »

Status: Gelöst | Ubuntu-Version: Kubuntu 9.04 (Jaunty Jackalope)
Antworten |

elvito Anmeldungsdatum: 17. März 2006 Beiträge: Zähle...	Zitieren 3. September 2009 15:25 Hallo liebe Ubuntugemeinde, ich verwende Ubuntu Jaunty mit dem Kernel 2.6.28-15-generic auf einem Acer Revo 3600 (http://hardware.magnus.de/desktop-server/artikel/check-nettop-pc-acer-aspire-revo-3600.html) an meiner Glotze (Bild und Sound wird über HDMI ausgegeben). Momentan funktioniert mit dem em28xx-new Methode lediglich die Wiedergabe eines analogen TV Signals allerdings kein DVB-T. Ich habe es ein einziges Mal geschafft die DVB-T Wiedergabe zum Laufen zu kriegen, allerdings gings nach einem reboot nicht mehr ☹. Da ich den Rechner neu aufgesetzt habe und mir dummerweise nicht gemerkt habe mit welchem Kernel ich das damals hinbekommen habe steh ich jetzt wie der Ochs vorm Berg und bin nahezu am verzweifeln! Ich kenne bereits diesen Thread –> http://forum.ubuntuusers.de/topic/cinergy-hybrid-t-usb-xs-linuxtauglich-1/, konnte damit allerdings DVB-T nicht erneut zum laufen kriegen. Natürlich habe ich auch diese Anleitung probiert –> http://wiki.ubuntuusers.de/em28xx ebenfalls ohne Erfolg. Hier ein paar Ausgaben: lsusb: vitus@ubuntu:~$ lsusb Bus 001 Device 006: ID 0ccd:0072 TerraTec Electronic GmbH Bus 001 Device 003: ID 1058:1003 Western Digital Technologies, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd Bus 002 Device 002: ID 046d:c058 Logitech, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub dmesg (nach dem ersten Einstecken der Karte nach dem Booten): [ 37.077460] eth0: no link during initialization. [ 37.078274] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.124937] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 50.255387] CPU0 attaching NULL sched-domain. [ 50.255398] CPU1 attaching NULL sched-domain. [ 50.260119] CPU0 attaching sched-domain: [ 50.260127] domain 0: span 0-1 level SIBLING [ 50.260133] groups: 0 1 [ 50.260144] CPU1 attaching sched-domain: [ 50.260148] domain 0: span 0-1 level SIBLING [ 50.260153] groups: 1 0 [ 69.256662] wlan0: authenticate with AP 00:24:fe:08:4d:64 [ 69.258451] wlan0: authenticated [ 69.258464] wlan0: associate with AP 00:24:fe:08:4d:64 [ 69.263406] wlan0: RX AssocResp from 00:24:fe:08:4d:64 (capab=0x411 status=0 aid=1) [ 69.263416] wlan0: associated [ 69.265858] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 80.100014] wlan0: no IPv6 routers present [ 98.292570] padlock: VIA PadLock not detected. [ 1059.917250] operapluginwrap[3981]: segfault at 69747369 ip 69747369 sp bf9a46ec error 4 [19831.570817] ath5k phy0: unsupported jumbo [22294.563297] ath5k phy0: unsupported jumbo [32700.580440] ath5k phy0: unsupported jumbo [36206.607338] ath5k phy0: unsupported jumbo [41622.996463] ath5k phy0: unsupported jumbo [51570.332927] ath5k phy0: unsupported jumbo [56130.253228] ath5k phy0: unsupported jumbo [56817.200755] ath5k phy0: unsupported jumbo [62840.999155] ath5k phy0: unsupported jumbo [63105.435160] ath5k phy0: unsupported jumbo [71092.616198] ath5k phy0: unsupported jumbo [72639.066777] ath5k phy0: unsupported jumbo [77953.084198] ath5k phy0: unsupported jumbo [84150.645881] ath5k phy0: unsupported jumbo [85187.292040] usb 1-6: new high speed USB device using ehci_hcd and address 5 [85187.432665] usb 1-6: configuration #1 chosen from 1 choice [85188.151074] Linux video capture interface: v2.00 [85188.251864] em28xx v4l2 driver version 0.0.1 loaded [85188.263661] em28xx: new video device (0ccd:0072): interface 0, class 255 [85188.263670] em28xx: device is attached to a USB 2.0 bus [85188.263681] em28xx #0: Alternate settings: 8 [85188.263687] em28xx #0: Alternate setting 0, max size= 0 [85188.263693] em28xx #0: Alternate setting 1, max size= 0 [85188.263698] em28xx #0: Alternate setting 2, max size= 1448 [85188.263703] em28xx #0: Alternate setting 3, max size= 2048 [85188.263710] em28xx #0: Alternate setting 4, max size= 2304 [85188.263716] em28xx #0: Alternate setting 5, max size= 2580 [85188.263722] em28xx #0: Alternate setting 6, max size= 2892 [85188.263727] em28xx #0: Alternate setting 7, max size= 3072 [85188.512861] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [85188.514352] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [85188.514813] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [85188.523161] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [85188.523639] cx25843.c: detecting cx25843 client on address 0x88 [85188.523694] attach_inform: msp34xx/cx25843 detected. [85190.081254] trying to attach xc5000 [85190.142068] attaching xc5000 tuner module [85191.641975] successfully attached tuner [85191.642103] radio device registered as /dev/radio0 [85191.646535] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [85191.653351] em28xx #0: V4L2 device registered as /dev/video0 [85191.653487] input: em2880/em2870 remote control as /devices/virtual/input/input7 [85191.657196] em28xx-input.c: remote control handler attached [85191.657206] em28xx #0: Found Terratec Hybrid XS FM (em2883) [85191.657262] usbcore: registered new interface driver em28xx [85191.754136] em28xx-audio.c: probing for em28x1 non standard usbaudio [85191.754145] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [85191.754937] Em28xx: Initialized (Em28xx Audio Extension) extension [85193.312544] opening radio device and trying to acquire exclusive lock [85193.312556] em28xx-audio: device is currently in analogue FM mode [85193.312563] device is locked in fmradio mode now [85193.502070] changing alternate number to 7 [85412.417036] usb 1-6: USB disconnect, address 5 [85412.444434] em28xx-input.c: remote control handler detached [85412.444444] audio: deinitializing audio device [85412.444449] audio: before waitstream [85412.444453] audio: after waitstream [85412.444457] audio: waiting for audioclients to release audio node [85412.444941] em28xx #0: disconnecting em28xx#0 video [85412.444950] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered [85412.445021] em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered [85412.445147] cx25843.c: removing cx25843 adapter on address 0x88 [85412.461017] BUG: unable to handle kernel NULL pointer dereference at 00000000 [85412.461034] IP: [<f806c302>] em28xx_read_reg_req+0x42/0x100 [em28xx] [85412.461069] *pde = 00000000 [85412.461079] Oops: 0000 [#1] SMP [85412.461088] last sysfs file: /sys/devices/pci0000:00/0000:00:04.1/usb1/idVendor [85412.461099] Dumping ftrace buffer: [85412.461107] (ftrace buffer empty) [85412.461112] Modules linked in: em28xx_dvb dvb_core em28xx_audio tuner_xc5000 em28xx_cx25843 em28xx videodev v4l1_compat aes_i586 aes_generic xts gf128mul dm_crypt binfmt_misc ppdev bridge stp bnep video output input_polldev lp parport snd_hda_intel arc4 ecb snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi ath5k snd_seq_midi_event snd_seq nvidia(P) snd_timer snd_seq_device mac80211 psmouse agpgart pcspkr serio_raw led_class snd cfg80211 shpchp soundcore snd_page_alloc usbhid usb_storage forcedeth fbcon tileblit font bitblit softcursor [85412.461225] [85412.461235] Pid: 10, comm: events/1 Tainted: P (2.6.28-15-generic #49-Ubuntu) Aspire R3600 [85412.461245] EIP: 0060:[<f806c302>] EFLAGS: 00010246 CPU: 1 [85412.461271] EIP is at em28xx_read_reg_req+0x42/0x100 [em28xx] [85412.461279] EAX: 00000000 EBX: ffffffed ECX: f6615f2f EDX: 00000000 [85412.461287] ESI: e13e0000 EDI: 00000045 EBP: f6615f3c ESP: f6615f10 [85412.461295] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [85412.461303] Process events/1 (pid: 10, ti=f6614000 task=f6618000 task.ti=f6614000) [85412.461310] Stack: [85412.461315] 312f7374 00000000 00000000 0000000a e13e0000 e13e0000 00000000 f6615f34 [85412.461333] e13e0000 e13e0000 f80bfeb0 f6615f50 f806da8d e83efe00 e13e0000 e83efe00 [85412.461351] f6615f6c f806dd38 f6615f90 dc2a6000 e83efe0c f6c07b00 f806dcf0 f6615fa4 [85412.461373] Call Trace: [85412.461390] [<f806da8d>] ? em2880_get_key_terratec+0x2d/0xa0 [em28xx] [85412.461422] [<f806dd38>] ? em28xx_ir_work+0x48/0x140 [em28xx] [85412.461451] [<f806dcf0>] ? em28xx_ir_work+0x0/0x140 [em28xx] [85412.461479] [<c014b0dd>] ? run_workqueue+0x8d/0x150 [85412.461494] [<c014b358>] ? worker_thread+0x88/0xf0 [85412.461505] [<c014ede0>] ? autoremove_wake_function+0x0/0x50 [85412.461518] [<c014b2d0>] ? worker_thread+0x0/0xf0 [85412.461528] [<c014ea3c>] ? kthread+0x3c/0x70 [85412.461538] [<c014ea00>] ? kthread+0x0/0x70 [85412.461547] [<c0105477>] ? kernel_thread_helper+0x7/0x10 [85412.461559] Code: ff ff ff 89 7d fc 74 11 89 d8 8b 75 f8 8b 5d f4 8b 7d fc 89 ec 5d c3 66 90 8b 86 40 0a 00 00 0f b6 d2 0f b7 f9 89 55 ec 8d 4d f3 <8b> 10 89 4c 24 0c 8b 4d ec c7 44 24 14 fa 00 00 00 c7 44 24 10 [85412.461661] EIP: [<f806c302>] em28xx_read_reg_req+0x42/0x100 [em28xx] SS:ESP 0068:f6615f10 [85412.461697] ---[ end trace d5a938fde8bd9c16 ]--- [85446.728190] usb 1-6: new high speed USB device using ehci_hcd and address 6 [85446.869303] usb 1-6: configuration #1 chosen from 1 choice [85446.869599] em28xx: new video device (0ccd:0072): interface 0, class 255 [85446.869608] em28xx: device is attached to a USB 2.0 bus [85446.869619] em28xx #0: Alternate settings: 8 [85446.869626] em28xx #0: Alternate setting 0, max size= 0 [85446.869633] em28xx #0: Alternate setting 1, max size= 0 [85446.869640] em28xx #0: Alternate setting 2, max size= 1448 [85446.869647] em28xx #0: Alternate setting 3, max size= 2048 [85446.869653] em28xx #0: Alternate setting 4, max size= 2304 [85446.869660] em28xx #0: Alternate setting 5, max size= 2580 [85446.869667] em28xx #0: Alternate setting 6, max size= 2892 [85446.869674] em28xx #0: Alternate setting 7, max size= 3072 [85447.219818] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [85447.220541] cx25843.c: detecting cx25843 client on address 0x88 [85447.220605] attach_inform: msp34xx/cx25843 detected. [85448.884244] trying to attach xc5000 [85448.884443] attaching xc5000 tuner module [85450.406851] successfully attached tuner [85450.407436] radio device registered as /dev/radio0 [85450.414925] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [85450.427100] em28xx #0: V4L2 device registered as /dev/video0 [85450.427112] em28xx-audio.c: probing for em28x1 non standard usbaudio [85450.427118] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [85450.430416] em2880-dvb.c: DVB Init [85450.905209] FIXME:em28xx_i2c_send_bytes(1e): write failed: [85450.905220] =============================== [85450.905226] 7f [85450.905231] ================================ [85450.905564] zl10353_read_register: readreg error (reg=127, ret==-19) [85450.949188] FIXME:em28xx_i2c_send_bytes(1e): write failed: [85450.949198] =============================== [85450.949204] 7f [85450.949208] ================================ [85450.949565] mt352_read_register: readreg error (reg=127, ret==-19) [85450.949839] em2880-dvb.c: failed initializing zl10353DVB-T demodulator [85450.949847] em2880-dvb.c: retrying with mt352 DVB-Tdemodulator [85450.949853] em2880-dvb.c: no luck with mt352demodulator, not attaching em2880-dvb [85450.950645] input: em2880/em2870 remote control as /devices/virtual/input/input8 [85450.988517] em28xx-input.c: remote control handler attached [85450.988531] em28xx #0: Found Terratec Hybrid XS FM (em2883) [85451.275677] opening radio device and trying to acquire exclusive lock [85451.275690] switching device to FM mode [85453.003615] retrieved mode from tuner: 1 [85453.004473] changing alternate number to 7 besonders störte mich dieser Abschnitt aus der Ausgabe von dmesg: [85450.430416] em2880-dvb.c: DVB Init [85450.905209] FIXME:em28xx_i2c_send_bytes(1e): write failed: [85450.905220] =============================== [85450.905226] 7f [85450.905231] ================================ [85450.905564] zl10353_read_register: readreg error (reg=127, ret==-19) [85450.949188] FIXME:em28xx_i2c_send_bytes(1e): write failed: [85450.949198] =============================== [85450.949204] 7f [85450.949208] ================================ [85450.949565] mt352_read_register: readreg error (reg=127, ret==-19) [85450.949839] em2880-dvb.c: failed initializing zl10353DVB-T demodulator [85450.949847] em2880-dvb.c: retrying with mt352 DVB-Tdemodulator [85450.949853] em2880-dvb.c: no luck with mt352demodulator, not attaching em2880-dvb nach ein bisschen googlen fand ich diesen Beitrag: http://www.mail-archive.com/em28xx@mcentral.de/msg01728.html mit diesem interesanten Abschnitt: one thing I noticed is that the eeprom returned a different value. I won't get on this issue before next week. The remote control system will be reworked very soon including userspace applications.. br, Markus Einen Beitrag weiter schreibt Waldemar dann: Hi, problem solved after a short IRC discussion with Markus Rechberger. There seems to be something corrupted in the EEPROM of my device, if I switch to a static gpio map instead of asking the gpio registers via EEPROM, my device works again. Simple patch: diff -r 6664052db595 em28xx-cards.c --- a/em28xx-cards.c Fri Nov 21 09:18:59 2008 +0100 +++ b/em28xx-cards.c Wed Nov 26 19:43:34 2008 +0100 @@ -1584,6 +1584,8 @@ .ir_keytab = ir_codes_em_terratec2, .ir_getkey = em2880_get_key_terratec, .dev_modes = EM28XX_VIDEO \| EM28XX_VBI \| EM28XX_DVBT \| EM28XX_AUDIO \| EM28XX_RADIO, + .manual_gpio = 1, + .gpio_regs = EETI_DEFAULT_GPIO, .input = {{ .type = EM28XX_VMUX_TELEVISION, .vmux = CX25843_TELEVISION, Thanks Markus! bye Waldemar Das übersteigt nun leider meine Fähigkeiten. Wo muss ich diesen Patch denn nun einfügen bzw. würde das evtl. mein Problem lösen? Da die Karte ja schonmal ging müsste es ja eigentlich auch ohne diesen Patch funzen. Hat jemand genau diese Karte im Betrieb mit DVB-T (Analog geht ja bei mir)? Wenn ja mit welchem Kernel und welcher Methode (Firmware oder em28xx-new)? Bitte nur auf diesen Thread antworten wenn es um die Karte aus der Überschrift geht sonst wird es hier so unübersichtlich wie in dem Hauptthread für die em28xx Installation. beste Grüße und danke im voraus für eure Hilfe Gruß elvito
Heinrich_Schwietering Wikiteam Anmeldungsdatum: 12. November 2005 Beiträge: 11288	Zitieren 3. September 2009 17:18 (zuletzt bearbeitet: 3. September 2009 17:29) Hi! elvito schrieb: Natürlich habe ich auch diese Anleitung probiert –> http://wiki.ubuntuusers.de/em28xx ebenfalls ohne Erfolg. Der Stick funktioniert nicht mit der firmware-Methode, sondern nur mit den em28xx-new-Modulen. Die Firmware solltest wieder entfernen, ggf. musst du dir auch den Kernel reinstallieren. (siehe die Diskussioen hier ff.); der Stick an sich funktioniert, habe ihn hier unter jaunty laufen. Den Patch müsstest du ggf auf em28xx-cards.c anwenden, aber ich würde erstmal bei dem Standard em28xx-new bleiben. so long hank
elvito (Themenstarter) Anmeldungsdatum: 17. März 2006 Beiträge: 32	Zitieren 8. September 2009 23:56 (zuletzt bearbeitet: 9. September 2009 00:06) Es besteht der gleiche Fehler wie oben in der Ausgabe von dmesg. Ich verstehe es einfach nicht. Die Karte lief doch einmal mit DVB-T. Kannst du mir evtl mal Schritt für Schritt sagen wie du vorgegegangen bist? edit: Moment... nach dem Booten kommt beim ersten Einstecken dieses (dmesg) [ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] BIOS-e820: 000000006ff90000 - 000000006ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ff9e000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x6ff90 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] modified: 000000006ff90000 - 000000006ff9e000 (ACPI data) [ 0.000000] modified: 000000006ff9e000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] modified: 000000006ffe0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 6f80b000 - 6ff7f589 [ 0.000000] Allocated new RAMDISK: 0087d000 - 00ff1589 [ 0.000000] Move RAMDISK from 000000006f80b000 - 000000006ff7f588 to 0087d000 - 00ff1588 [ 0.000000] ACPI: RSDP 000FB160, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 6FF90100, 006C (r1 ACRSYS ACRPRDCT 20090430 MSFT 97) [ 0.000000] ACPI: FACP 6FF90290, 00F4 (r3 ACRSYS FACP1945 20090430 MSFT 97) [ 0.000000] ACPI: DSDT 6FF90620, 69BE (r1 8C8A1 8C8A1P04 4 INTL 20051117) [ 0.000000] ACPI: FACS 6FF9E000, 0040 [ 0.000000] ACPI: APIC 6FF90390, 0080 (r1 ACRSYS APIC1945 20090430 MSFT 97) [ 0.000000] ACPI: MCFG 6FF90410, 003C (r1 ACRSYS OEMMCFG 20090430 MSFT 97) [ 0.000000] ACPI: SLIC 6FF90450, 0176 (r1 ACRSYS ACRPRDCT 20090430 MSFT 97) [ 0.000000] ACPI: WDRT 6FF905D0, 0047 (r1 ACRSYS NV-WDRT 20090430 MSFT 97) [ 0.000000] ACPI: OEMB 6FF9E040, 0079 (r1 ACRSYS OEMB1945 20090430 MSFT 97) [ 0.000000] ACPI: HPET 6FF9A620, 0038 (r1 ACRSYS OEMHPET0 20090430 MSFT 97) [ 0.000000] ACPI: NVHD 6FF9E0C0, 0284 (r1 ACRSYS NVHDCP 20090430 MSFT 97) [ 0.000000] ACPI: AWMI 6FF9E350, 004E (r1 ACRSYS OEMB1945 20090430 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 907MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0000ff1589] NEW RAMDISK ==> [000087d000 - 0000ff1589] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0006ff90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0006ff90 [ 0.000000] On node 0 totalpages: 458526 [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1816 pages used for memmap [ 0.000000] HighMem zone: 230522 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454942 [ 0.000000] Kernel command line: root=UUID=CA9051CE9051C19D loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.074 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 9172480 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1793616k/1834560k available (4115k kernel code, 39624k reserved, 2199k data, 532k init, 929352k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.14 BogoMIPS (lpj=6400296) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.019703] ACPI: Core revision 20080926 [ 0.022884] ACPI: Checking initramfs for custom DSDT [ 0.522094] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.561799] CPU0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.564002] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3199.91 BogoMIPS (lpj=6399828) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.652293] CPU1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.652335] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.656067] Brought up 2 CPUs [ 0.656074] Total of 2 processors activated (6400.06 BogoMIPS). [ 0.656158] CPU0 attaching sched-domain: [ 0.656163] domain 0: span 0-1 level SIBLING [ 0.656168] groups: 0 1 [ 0.656179] CPU1 attaching sched-domain: [ 0.656183] domain 0: span 0-1 level SIBLING [ 0.656187] groups: 1 0 [ 0.656321] net_namespace: 776 bytes [ 0.656321] Booting paravirtualized kernel on bare hardware [ 0.656693] Time: 9:31:40 Date: 09/08/09 [ 0.656693] regulator: core version 0.5 [ 0.656693] NET: Registered protocol family 16 [ 0.656693] EISA bus registered [ 0.656693] ACPI: bus type pci registered [ 0.656693] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.656693] PCI: Not using MMCONFIG. [ 0.656854] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7 [ 0.656859] PCI: Using configuration type 1 for base access [ 0.662223] ACPI: EC: Look up EC in DSDT [ 0.691010] ACPI: Interpreter enabled [ 0.691018] ACPI: (supports S0 S1 S3 S4 S5) [ 0.691063] ACPI: Using IOAPIC for interrupt routing [ 0.691198] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.705254] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources [ 0.705260] PCI: Using MMCONFIG for extended config space [ 0.737966] ACPI: No dock devices found. [ 0.738150] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.738444] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff] [ 0.738571] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f] [ 0.738592] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f] [ 0.738600] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f] [ 0.738619] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.738628] pci 0000:00:03.2: PME# disabled [ 0.738767] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff] [ 0.738869] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff] [ 0.738903] pci 0000:00:04.0: supports D1 D2 [ 0.738907] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738914] pci 0000:00:04.0: PME# disabled [ 0.738951] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff] [ 0.738988] pci 0000:00:04.1: supports D1 D2 [ 0.738992] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738998] pci 0000:00:04.1: PME# disabled [ 0.739043] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff] [ 0.739078] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.739084] pci 0000:00:08.0: PME# disabled [ 0.739151] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfae7d000-0xfae7dfff] [ 0.739160] pci 0000:00:0a.0: reg 14 io port: [0xd080-0xd087] [ 0.739168] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfae7e800-0xfae7e8ff] [ 0.739177] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfae7e400-0xfae7e40f] [ 0.739199] pci 0000:00:0a.0: supports D1 D2 [ 0.739203] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739211] pci 0000:00:0a.0: PME# disabled [ 0.739248] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd007] [ 0.739257] pci 0000:00:0b.0: reg 14 io port: [0xcc00-0xcc03] [ 0.739265] pci 0000:00:0b.0: reg 18 io port: [0xc880-0xc887] [ 0.739273] pci 0000:00:0b.0: reg 1c io port: [0xc800-0xc803] [ 0.739281] pci 0000:00:0b.0: reg 20 io port: [0xc480-0xc48f] [ 0.739290] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae76000-0xfae77fff] [ 0.739453] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739464] pci 0000:00:0c.0: PME# disabled [ 0.739541] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739547] pci 0000:00:10.0: PME# disabled [ 0.739711] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739721] pci 0000:00:15.0: PME# disabled [ 0.739901] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739912] pci 0000:00:16.0: PME# disabled [ 0.740104] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740115] pci 0000:00:17.0: PME# disabled [ 0.740291] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740302] pci 0000:00:18.0: PME# disabled [ 0.740402] pci 0000:00:09.0: transparent bridge [ 0.740547] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.740562] pci 0000:03:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.740576] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.740585] pci 0000:03:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.740595] pci 0000:03:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff] [ 0.740651] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.740658] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.740666] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff] [ 0.740817] pci 0000:05:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff] [ 0.740939] pci 0000:00:16.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.741216] bus 00 -> node 0 [ 0.741232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.741767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT] [ 0.742139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.742388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 0.742695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.742989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.743282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.743574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.764970] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) 0, disabled. [ 0.765634] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) 0, disabled. [ 0.766292] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) 0, disabled. [ 0.766951] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) 0, disabled. [ 0.767616] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) 0, disabled. [ 0.768304] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) 0, disabled. [ 0.768976] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) 0, disabled. [ 0.769638] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) 0, disabled. [ 0.770298] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) 0, disabled. [ 0.770956] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) 0, disabled. [ 0.771617] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) 0, disabled. [ 0.772295] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) 0, disabled. [ 0.772965] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) 0, disabled. [ 0.773627] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) 0, disabled. [ 0.774285] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) 0, disabled. [ 0.774946] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) 0, disabled. [ 0.775608] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) 0, disabled. [ 0.776286] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) 0, disabled. [ 0.776953] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) 0, disabled. [ 0.777615] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) 0, disabled. [ 0.778287] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) 9 [ 0.778951] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) 0, disabled. [ 0.779608] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) 0, disabled. [ 0.780287] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) 0, disabled. [ 0.780957] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) 0, disabled. [ 0.781616] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) 0, disabled. [ 0.782278] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) 0, disabled. [ 0.782940] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) 0, disabled. [ 0.783600] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) 0, disabled. [ 0.784280] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) 0, disabled. [ 0.784948] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) 0, disabled. [ 0.785611] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) 0, disabled. [ 0.786283] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) 9 [ 0.786953] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) 15 [ 0.787625] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) 11 [ 0.788314] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) 10 [ 0.788993] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) 7 [ 0.789670] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) 10 [ 0.790339] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) 11 [ 0.791010] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) 5 [ 0.791786] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) 0, disabled. [ 0.792474] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) 0, disabled. [ 0.793141] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) 0, disabled. [ 0.793816] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) 10 [ 0.794487] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) 0, disabled. [ 0.795153] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) 0, disabled. [ 0.795836] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) 11 [ 0.796539] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) 9 [ 0.797215] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) 15 [ 0.797894] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) 14 [ 0.798518] ACPI: WMI: Mapper loaded [ 0.798649] SCSI subsystem initialized [ 0.798649] libata version 3.00 loaded. [ 0.798649] usbcore: registered new interface driver usbfs [ 0.798649] usbcore: registered new interface driver hub [ 0.798649] usbcore: registered new device driver usb [ 0.798649] PCI: Using ACPI for IRQ routing [ 0.804021] Bluetooth: Core ver 2.13 [ 0.804063] NET: Registered protocol family 31 [ 0.804063] Bluetooth: HCI device and connection manager initialized [ 0.804063] Bluetooth: HCI socket layer initialized [ 0.804063] NET: Registered protocol family 8 [ 0.804063] NET: Registered protocol family 20 [ 0.804077] NetLabel: Initializing [ 0.804080] NetLabel: domain hash size = 128 [ 0.804084] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.804108] NetLabel: unlabeled traffic allowed by default [ 0.804138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.804150] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.808114] AppArmor: AppArmor Filesystem Enabled [ 0.812017] Switched to high resolution mode on CPU 0 [ 0.812404] Switched to high resolution mode on CPU 1 [ 0.816028] pnp: PnP ACPI init [ 0.816051] ACPI: bus type pnp registered [ 0.830426] pnp: PnP ACPI: found 10 devices [ 0.830432] ACPI: ACPI bus type pnp unregistered [ 0.830438] PnPBIOS: Disabled by ACPI PNP [ 0.830463] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.830469] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.830475] system 00:04: ioport range 0x4000-0x407f has been reserved [ 0.830480] system 00:04: ioport range 0x4080-0x40ff has been reserved [ 0.830486] system 00:04: ioport range 0x4400-0x447f has been reserved [ 0.830492] system 00:04: ioport range 0x4480-0x44ff has been reserved [ 0.830498] system 00:04: ioport range 0x4800-0x487f has been reserved [ 0.830503] system 00:04: ioport range 0x4880-0x48ff has been reserved [ 0.830511] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved [ 0.830517] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.830524] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.830537] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.830543] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.830555] system 00:08: iomem range 0xfc000000-0xfdffffff has been reserved [ 0.830567] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.830573] system 00:09: iomem range 0xc0000-0xcffff could not be reserved [ 0.830579] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.830585] system 00:09: iomem range 0x100000-0x7fffffff could not be reserved [ 0.830591] system 00:09: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.865535] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.865540] pci 0000:00:09.0: IO window: disabled [ 0.865548] pci 0000:00:09.0: MEM window: disabled [ 0.865554] pci 0000:00:09.0: PREFETCH window: disabled [ 0.865562] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02 [ 0.865566] pci 0000:00:0c.0: IO window: disabled [ 0.865579] pci 0000:00:0c.0: MEM window: disabled [ 0.865589] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.865606] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.865612] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.865619] pci 0000:00:10.0: MEM window: 0xfaf00000-0xfbffffff [ 0.865626] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f9ffffff [ 0.865634] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.865638] pci 0000:00:15.0: IO window: disabled [ 0.865651] pci 0000:00:15.0: MEM window: disabled [ 0.865660] pci 0000:00:15.0: PREFETCH window: disabled [ 0.865677] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05 [ 0.865681] pci 0000:00:16.0: IO window: disabled [ 0.865695] pci 0000:00:16.0: MEM window: 0xfeb00000-0xfebfffff [ 0.865705] pci 0000:00:16.0: PREFETCH window: disabled [ 0.865721] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06 [ 0.865725] pci 0000:00:17.0: IO window: disabled [ 0.865738] pci 0000:00:17.0: MEM window: disabled [ 0.865748] pci 0000:00:17.0: PREFETCH window: disabled [ 0.865764] pci 0000:00:18.0: PCI bridge, secondary bus 0000:07 [ 0.865768] pci 0000:00:18.0: IO window: disabled [ 0.865781] pci 0000:00:18.0: MEM window: disabled [ 0.865791] pci 0000:00:18.0: PREFETCH window: disabled [ 0.865816] pci 0000:00:09.0: setting latency timer to 64 [ 0.866755] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23 [ 0.866769] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23 [ 0.866782] pci 0000:00:0c.0: setting latency timer to 64 [ 0.866795] pci 0000:00:10.0: setting latency timer to 64 [ 0.867702] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22 [ 0.867712] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22 [ 0.867725] pci 0000:00:15.0: setting latency timer to 64 [ 0.868659] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21 [ 0.868669] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21 [ 0.868682] pci 0000:00:16.0: setting latency timer to 64 [ 0.869586] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20 [ 0.869596] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20 [ 0.869609] pci 0000:00:17.0: setting latency timer to 64 [ 0.870514] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23 [ 0.870522] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23 [ 0.870534] pci 0000:00:18.0: setting latency timer to 64 [ 0.870544] bus: 00 index 0 io port: [0x00-0xffff] [ 0.870549] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.870553] bus: 01 index 0 mmio: [0x0-0x0] [ 0.870557] bus: 01 index 1 mmio: [0x0-0x0] [ 0.870561] bus: 01 index 2 mmio: [0x0-0x0] [ 0.870566] bus: 01 index 3 io port: [0x00-0xffff] [ 0.870570] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.870575] bus: 02 index 0 mmio: [0x0-0x0] [ 0.870578] bus: 02 index 1 mmio: [0x0-0x0] [ 0.870582] bus: 02 index 2 mmio: [0x0-0x0] [ 0.870586] bus: 02 index 3 mmio: [0x0-0x0] [ 0.870591] bus: 03 index 0 io port: [0xe000-0xefff] [ 0.870595] bus: 03 index 1 mmio: [0xfaf00000-0xfbffffff] [ 0.870600] bus: 03 index 2 mmio: [0xe0000000-0xf9ffffff] [ 0.870604] bus: 03 index 3 mmio: [0x0-0x0] [ 0.870609] bus: 04 index 0 mmio: [0x0-0x0] [ 0.870612] bus: 04 index 1 mmio: [0x0-0x0] [ 0.870616] bus: 04 index 2 mmio: [0x0-0x0] [ 0.870620] bus: 04 index 3 mmio: [0x0-0x0] [ 0.870624] bus: 05 index 0 mmio: [0x0-0x0] [ 0.870629] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff] [ 0.870633] bus: 05 index 2 mmio: [0x0-0x0] [ 0.870637] bus: 05 index 3 mmio: [0x0-0x0] [ 0.870641] bus: 06 index 0 mmio: [0x0-0x0] [ 0.870645] bus: 06 index 1 mmio: [0x0-0x0] [ 0.870648] bus: 06 index 2 mmio: [0x0-0x0] [ 0.870652] bus: 06 index 3 mmio: [0x0-0x0] [ 0.870656] bus: 07 index 0 mmio: [0x0-0x0] [ 0.870660] bus: 07 index 1 mmio: [0x0-0x0] [ 0.870664] bus: 07 index 2 mmio: [0x0-0x0] [ 0.870668] bus: 07 index 3 mmio: [0x0-0x0] [ 0.870689] NET: Registered protocol family 2 [ 0.884131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.884664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.885452] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.885873] TCP: Hash tables configured (established 131072 bind 65536) [ 0.885879] TCP reno registered [ 0.892205] NET: Registered protocol family 1 [ 0.892417] checking if image is initramfs... it is [ 1.914907] Freeing initrd memory: 7633k freed [ 1.915286] cpufreq: No nForce2 chipset. [ 1.915548] audit: initializing netlink socket (disabled) [ 1.915583] type=2000 audit(1252402300.912:1): initialized [ 1.929891] highmem bounce pool size: 64 pages [ 1.929907] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.932669] VFS: Disk quotas dquot_6.5.1 [ 1.932793] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.934107] fuse init (API version 7.10) [ 1.934282] msgmni has been set to 1704 [ 1.934630] alg: No test for stdrng (krng) [ 1.934663] io scheduler noop registered [ 1.934668] io scheduler anticipatory registered [ 1.934672] io scheduler deadline registered [ 1.934710] io scheduler cfq registered (default) [ 1.957862] pci 0000:03:00.0: Boot video device [ 1.979857] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.980041] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.980142] pcieport-driver 0000:00:0c.0: irq 2303 for MSI/MSI-X [ 1.980184] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.980409] pcieport-driver 0000:00:15.0: setting latency timer to 64 [ 1.980594] pcieport-driver 0000:00:15.0: found MSI capability [ 1.980696] pcieport-driver 0000:00:15.0: irq 2302 for MSI/MSI-X [ 1.980739] pci_express 0000:00:15.0:pcie00: allocate port service [ 1.980938] pcieport-driver 0000:00:16.0: setting latency timer to 64 [ 1.981107] pcieport-driver 0000:00:16.0: found MSI capability [ 1.981201] pcieport-driver 0000:00:16.0: irq 2301 for MSI/MSI-X [ 1.981242] pci_express 0000:00:16.0:pcie00: allocate port service [ 1.981448] pcieport-driver 0000:00:17.0: setting latency timer to 64 [ 1.981616] pcieport-driver 0000:00:17.0: found MSI capability [ 1.981710] pcieport-driver 0000:00:17.0: irq 2300 for MSI/MSI-X [ 1.981750] pci_express 0000:00:17.0:pcie00: allocate port service [ 1.981948] pcieport-driver 0000:00:18.0: setting latency timer to 64 [ 1.982122] pcieport-driver 0000:00:18.0: found MSI capability [ 1.982220] pcieport-driver 0000:00:18.0: irq 2299 for MSI/MSI-X [ 1.982261] pci_express 0000:00:18.0:pcie00: allocate port service [ 1.982458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.982478] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.982742] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.982748] ACPI: Power Button (FF) [PWRF] [ 1.982848] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.982854] ACPI: Power Button (CM) [PWRB] [ 1.984150] processor ACPI_CPU:00: registered as cooling_device0 [ 1.984159] ACPI: Processor [P001] (supports 8 throttling states) [ 1.984834] processor ACPI_CPU:01: registered as cooling_device1 [ 1.984842] ACPI: Processor [P002] (supports 8 throttling states) [ 1.997536] isapnp: Scanning for PnP cards... [ 2.350563] isapnp: No Plug & Play device found [ 2.361106] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.362974] brd: module loaded [ 2.363654] loop: module loaded [ 2.363803] Fixed MDIO Bus: probed [ 2.363816] PPP generic driver version 2.4.2 [ 2.363939] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.364002] Driver 'sd' needs updating - please use bus_type methods [ 2.364032] Driver 'sr' needs updating - please use bus_type methods [ 2.364125] ahci 0000:00:0b.0: version 3.0 [ 2.365106] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 2.365115] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 2.365205] ahci 0000:00:0b.0: irq 2298 for MSI/MSI-X [ 2.365317] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.365324] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part [ 2.365331] ahci 0000:00:0b.0: setting latency timer to 64 [ 2.366199] scsi0 : ahci [ 2.366442] scsi1 : ahci [ 2.366566] scsi2 : ahci [ 2.366707] scsi3 : ahci [ 2.366852] scsi4 : ahci [ 2.367000] scsi5 : ahci [ 2.367262] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 2298 [ 2.367269] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 2298 [ 2.367275] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 2298 [ 2.367281] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 2298 [ 2.367286] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 2298 [ 2.367292] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 2298 [ 2.684023] ata1: SATA link down (SStatus 0 SControl 300) [ 3.168023] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.168888] ata2.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133 [ 3.168894] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.170010] ata2.00: configured for UDMA/133 [ 3.488022] ata3: SATA link down (SStatus 0 SControl 300) [ 3.808022] ata4: SATA link down (SStatus 0 SControl 300) [ 4.128022] ata5: SATA link down (SStatus 0 SControl 300) [ 4.448022] ata6: SATA link down (SStatus 0 SControl 300) [ 4.448233] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 [ 4.448441] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4.448484] sd 1:0:0:0: [sda] Write Protect is off [ 4.448490] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.448582] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.448730] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4.448770] sd 1:0:0:0: [sda] Write Protect is off [ 4.448776] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.448845] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.448854] sda: sda1 sda2 sda3 [ 4.473744] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.473841] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.475304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.476349] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 4.476358] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 4.476393] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 4.476399] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 4.476532] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 4.476579] ehci_hcd 0000:00:04.1: debug port 1 [ 4.476587] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 4.476614] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfae7ec00 [ 4.488019] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 4.488162] usb usb1: configuration #1 chosen from 1 choice [ 4.488228] hub 1-0:1.0: USB hub found [ 4.488244] hub 1-0:1.0: 12 ports detected [ 4.488477] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.489440] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 4.489449] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 4.489478] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 4.489484] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 4.489584] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 4.489620] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfae7f000 [ 4.546125] usb usb2: configuration #1 chosen from 1 choice [ 4.546182] hub 2-0:1.0: USB hub found [ 4.546200] hub 2-0:1.0: 12 ports detected [ 4.546391] uhci_hcd: USB Universal Host Controller Interface driver [ 4.546554] PNP: No PS/2 controller found. Probing ports directly. [ 4.548042] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.548057] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.552092] mice: PS/2 mouse device common for all mice [ 4.564129] rtc_cmos 00:06: RTC can wake from S4 [ 4.564196] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.564255] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 4.564396] device-mapper: uevent: version 1.0.3 [ 4.564600] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 4.564769] device-mapper: multipath: version 1.0.5 loaded [ 4.564777] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.564962] EISA: Probing bus 0 at eisa.0 [ 4.564982] Cannot allocate resource for EISA slot 4 [ 4.565001] EISA: Detected 0 cards. [ 4.565102] cpuidle: using governor ladder [ 4.565108] cpuidle: using governor menu [ 4.566212] TCP cubic registered [ 4.566437] NET: Registered protocol family 10 [ 4.567293] lo: Disabled Privacy Extensions [ 4.567941] NET: Registered protocol family 17 [ 4.567980] Bluetooth: L2CAP ver 2.11 [ 4.567984] Bluetooth: L2CAP socket layer initialized [ 4.567990] Bluetooth: SCO (Voice Link) ver 0.6 [ 4.567993] Bluetooth: SCO socket layer initialized [ 4.568095] Bluetooth: RFCOMM socket layer initialized [ 4.568112] Bluetooth: RFCOMM TTY layer initialized [ 4.568117] Bluetooth: RFCOMM ver 1.10 [ 4.568224] Using IPI No-Shortcut mode [ 4.568393] registered taskstats version 1 [ 4.568660] Magic number: 9:50:525 [ 4.568801] rtc_cmos 00:06: setting system clock to 2009-09-08 09:31:44 UTC (1252402304) [ 4.568810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.568815] EDD information not available. [ 4.569199] Freeing unused kernel memory: 532k freed [ 4.569482] Write protecting the kernel text: 4116k [ 4.569580] Write protecting the kernel read-only data: 1528k [ 4.856549] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 5.014170] usb 1-2: configuration #1 chosen from 1 choice [ 5.153908] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.155062] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 5.155073] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 5.155084] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 5.156829] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:22:68:65:0d:a7 [ 5.156838] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 5.372589] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 5.613201] usb 2-1: configuration #1 chosen from 1 choice [ 5.668796] Initializing USB Mass Storage driver... [ 5.677432] usbcore: registered new interface driver hiddev [ 5.677687] scsi6 : SCSI emulation for USB Mass Storage devices [ 5.677852] usb-storage: device found at 3 [ 5.677859] usb-storage: waiting for device to settle before scanning [ 5.677895] usbcore: registered new interface driver usb-storage [ 5.677902] USB Mass Storage support registered. [ 5.683757] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3 [ 5.688716] generic-usb 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:04.0-1/input0 [ 5.688768] usbcore: registered new interface driver usbhid [ 5.688778] usbhid: v2.6:USB HID core driver [ 5.920046] usb 2-3: new low speed USB device using ohci_hcd and address 3 [ 6.152124] usb 2-3: configuration #1 chosen from 1 choice [ 6.167480] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.0/input/input4 [ 6.172194] generic-usb 0003:04F2:0402.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:04.0-3/input0 [ 6.199126] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.1/input/input5 [ 6.208771] generic-usb 0003:04F2:0402.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:04.0-3/input1 [ 6.221332] kjournald starting. Commit interval 5 seconds [ 6.221360] EXT3-fs: mounted filesystem with ordered data mode. [ 10.676792] usb-storage: device scan complete [ 10.678639] scsi 6:0:0:0: Direct-Access WD 10EAVS External 1.75 PQ: 0 ANSI: 4 [ 10.680365] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 10.681496] sd 6:0:0:0: [sdb] Write Protect is off [ 10.681525] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 10.681530] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 10.682232] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 10.683499] sd 6:0:0:0: [sdb] Write Protect is off [ 10.683507] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 10.683512] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 10.683523] sdb: sdb1 [ 10.693375] sd 6:0:0:0: [sdb] Attached SCSI disk [ 10.693490] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 12.657882] udev: starting version 141 [ 13.799492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.932619] cfg80211: Calling CRDA to update world regulatory domain [ 13.983373] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 14.011874] acer-wmi: Acer Laptop ACPI-WMI Extras [ 14.011907] acer-wmi: No or unsupported WMI interface, unable to load [ 14.090742] cfg80211: World regulatory domain updated: [ 14.090750] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.090757] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.090762] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.090768] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.090773] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.090778] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.201571] Linux agpgart interface v0.103 [ 14.537350] nvidia: module license 'NVIDIA' taints kernel. [ 14.571640] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19 [ 14.571659] ath5k_pci 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19 [ 14.571677] ath5k_pci 0000:05:00.0: setting latency timer to 64 [ 14.572091] ath5k_pci 0000:05:00.0: registered as 'phy0' [ 14.622707] phy0: Selected rate control algorithm 'pid' [ 14.778358] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 14.803325] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22 [ 14.803337] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22 [ 14.803354] nvidia 0000:03:00.0: setting latency timer to 64 [ 14.804414] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 14.873845] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 14.875047] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 14.875060] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 14.875143] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 15.930459] lp: driver loaded but no devices found [ 16.689389] EXT3 FS on loop0, internal journal [ 24.489704] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k [ 24.918825] type=1505 audit(1252395124.847:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2080 [ 24.919098] type=1505 audit(1252395124.847:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2080 [ 24.919210] type=1505 audit(1252395124.847:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2080 [ 24.919312] type=1505 audit(1252395124.847:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2080 [ 25.234301] type=1505 audit(1252395125.163:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2085 [ 25.234705] type=1505 audit(1252395125.163:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2085 [ 25.315009] type=1505 audit(1252395125.243:8): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2089 [ 25.376639] type=1505 audit(1252395125.307:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2093 [ 33.425840] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.425848] Bluetooth: BNEP filters: protocol multicast [ 33.469307] Bridge firewalling registered [ 34.306180] ppdev: user-space parallel port driver [ 38.074563] eth0: no link during initialization. [ 38.075385] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.136589] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 51.665080] CPU0 attaching NULL sched-domain. [ 51.665090] CPU1 attaching NULL sched-domain. [ 51.668793] CPU0 attaching sched-domain: [ 51.668799] domain 0: span 0-1 level SIBLING [ 51.668805] groups: 0 1 [ 51.668816] CPU1 attaching sched-domain: [ 51.668820] domain 0: span 0-1 level SIBLING [ 51.668825] groups: 1 0 [ 102.181144] wlan0: authenticate with AP 00:24:fe:08:4d:64 [ 102.182985] wlan0: authenticated [ 102.183000] wlan0: associate with AP 00:24:fe:08:4d:64 [ 102.188748] wlan0: RX AssocResp from 00:24:fe:08:4d:64 (capab=0x411 status=0 aid=2) [ 102.188757] wlan0: associated [ 102.189426] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 104.331270] padlock: VIA PadLock not detected. [ 112.432022] wlan0: no IPv6 routers present [ 135.017419] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 2088.957320] ath5k phy0: noise floor calibration timeout (2427MHz) [ 2091.028736] ath5k phy0: noise floor calibration timeout (2427MHz) [51953.816049] usb 1-6: new high speed USB device using ehci_hcd and address 5 [51953.956130] usb 1-6: configuration #1 chosen from 1 choice [51955.180807] Linux video capture interface: v2.00 [51955.344844] em28xx v4l2 driver version 0.0.1 loaded [51955.347686] em28xx: new video device (0ccd:0072): interface 0, class 255 [51955.347695] em28xx: device is attached to a USB 2.0 bus [51955.347705] em28xx #0: Alternate settings: 8 [51955.347711] em28xx #0: Alternate setting 0, max size= 0 [51955.347716] em28xx #0: Alternate setting 1, max size= 0 [51955.347722] em28xx #0: Alternate setting 2, max size= 1448 [51955.347728] em28xx #0: Alternate setting 3, max size= 2048 [51955.347734] em28xx #0: Alternate setting 4, max size= 2304 [51955.347740] em28xx #0: Alternate setting 5, max size= 2580 [51955.347746] em28xx #0: Alternate setting 6, max size= 2892 [51955.347753] em28xx #0: Alternate setting 7, max size= 3072 [51955.593554] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.595108] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.596223] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.598362] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [51955.598809] cx25843.c: detecting cx25843 client on address 0x88 [51955.598869] attach_inform: msp34xx/cx25843 detected. [51957.269715] trying to attach xc5000 [51957.332296] attaching xc5000 tuner module [51958.880132] successfully attached tuner [51958.880283] radio device registered as /dev/radio0 [51958.884721] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [51958.892754] em28xx #0: V4L2 device registered as /dev/video0 [51958.892890] input: em2880/em2870 remote control as /devices/virtual/input/input7 [51958.902286] em28xx-input.c: remote control handler attached [51958.902293] em28xx #0: Found Terratec Hybrid XS FM (em2883) [51958.902333] usbcore: registered new interface driver em28xx [51959.091167] em28xx-audio.c: probing for em28x1 non standard usbaudio [51959.091176] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [51959.096227] Em28xx: Initialized (Em28xx Audio Extension) extension [51960.609271] opening radio device and trying to acquire exclusive lock [51960.609283] em28xx-audio: device is currently in analogue FM mode [51960.609290] device is locked in fmradio mode now [51960.613502] changing alternate number to 7 Stecke ich den Stick aus kommt das: [ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] BIOS-e820: 000000006ff90000 - 000000006ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ff9e000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x6ff90 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] modified: 000000006ff90000 - 000000006ff9e000 (ACPI data) [ 0.000000] modified: 000000006ff9e000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] modified: 000000006ffe0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 6f80b000 - 6ff7f589 [ 0.000000] Allocated new RAMDISK: 0087d000 - 00ff1589 [ 0.000000] Move RAMDISK from 000000006f80b000 - 000000006ff7f588 to 0087d000 - 00ff1588 [ 0.000000] ACPI: RSDP 000FB160, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 6FF90100, 006C (r1 ACRSYS ACRPRDCT 20090430 MSFT 97) [ 0.000000] ACPI: FACP 6FF90290, 00F4 (r3 ACRSYS FACP1945 20090430 MSFT 97) [ 0.000000] ACPI: DSDT 6FF90620, 69BE (r1 8C8A1 8C8A1P04 4 INTL 20051117) [ 0.000000] ACPI: FACS 6FF9E000, 0040 [ 0.000000] ACPI: APIC 6FF90390, 0080 (r1 ACRSYS APIC1945 20090430 MSFT 97) [ 0.000000] ACPI: MCFG 6FF90410, 003C (r1 ACRSYS OEMMCFG 20090430 MSFT 97) [ 0.000000] ACPI: SLIC 6FF90450, 0176 (r1 ACRSYS ACRPRDCT 20090430 MSFT 97) [ 0.000000] ACPI: WDRT 6FF905D0, 0047 (r1 ACRSYS NV-WDRT 20090430 MSFT 97) [ 0.000000] ACPI: OEMB 6FF9E040, 0079 (r1 ACRSYS OEMB1945 20090430 MSFT 97) [ 0.000000] ACPI: HPET 6FF9A620, 0038 (r1 ACRSYS OEMHPET0 20090430 MSFT 97) [ 0.000000] ACPI: NVHD 6FF9E0C0, 0284 (r1 ACRSYS NVHDCP 20090430 MSFT 97) [ 0.000000] ACPI: AWMI 6FF9E350, 004E (r1 ACRSYS OEMB1945 20090430 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 907MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0000ff1589] NEW RAMDISK ==> [000087d000 - 0000ff1589] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0006ff90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0006ff90 [ 0.000000] On node 0 totalpages: 458526 [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1816 pages used for memmap [ 0.000000] HighMem zone: 230522 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454942 [ 0.000000] Kernel command line: root=UUID=CA9051CE9051C19D loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.074 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 9172480 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1793616k/1834560k available (4115k kernel code, 39624k reserved, 2199k data, 532k init, 929352k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.14 BogoMIPS (lpj=6400296) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.019703] ACPI: Core revision 20080926 [ 0.022884] ACPI: Checking initramfs for custom DSDT [ 0.522094] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.561799] CPU0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.564002] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3199.91 BogoMIPS (lpj=6399828) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.652293] CPU1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.652335] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.656067] Brought up 2 CPUs [ 0.656074] Total of 2 processors activated (6400.06 BogoMIPS). [ 0.656158] CPU0 attaching sched-domain: [ 0.656163] domain 0: span 0-1 level SIBLING [ 0.656168] groups: 0 1 [ 0.656179] CPU1 attaching sched-domain: [ 0.656183] domain 0: span 0-1 level SIBLING [ 0.656187] groups: 1 0 [ 0.656321] net_namespace: 776 bytes [ 0.656321] Booting paravirtualized kernel on bare hardware [ 0.656693] Time: 9:31:40 Date: 09/08/09 [ 0.656693] regulator: core version 0.5 [ 0.656693] NET: Registered protocol family 16 [ 0.656693] EISA bus registered [ 0.656693] ACPI: bus type pci registered [ 0.656693] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.656693] PCI: Not using MMCONFIG. [ 0.656854] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7 [ 0.656859] PCI: Using configuration type 1 for base access [ 0.662223] ACPI: EC: Look up EC in DSDT [ 0.691010] ACPI: Interpreter enabled [ 0.691018] ACPI: (supports S0 S1 S3 S4 S5) [ 0.691063] ACPI: Using IOAPIC for interrupt routing [ 0.691198] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.705254] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources [ 0.705260] PCI: Using MMCONFIG for extended config space [ 0.737966] ACPI: No dock devices found. [ 0.738150] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.738444] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff] [ 0.738571] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f] [ 0.738592] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f] [ 0.738600] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f] [ 0.738619] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.738628] pci 0000:00:03.2: PME# disabled [ 0.738767] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff] [ 0.738869] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff] [ 0.738903] pci 0000:00:04.0: supports D1 D2 [ 0.738907] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738914] pci 0000:00:04.0: PME# disabled [ 0.738951] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff] [ 0.738988] pci 0000:00:04.1: supports D1 D2 [ 0.738992] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738998] pci 0000:00:04.1: PME# disabled [ 0.739043] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff] [ 0.739078] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.739084] pci 0000:00:08.0: PME# disabled [ 0.739151] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfae7d000-0xfae7dfff] [ 0.739160] pci 0000:00:0a.0: reg 14 io port: [0xd080-0xd087] [ 0.739168] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfae7e800-0xfae7e8ff] [ 0.739177] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfae7e400-0xfae7e40f] [ 0.739199] pci 0000:00:0a.0: supports D1 D2 [ 0.739203] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739211] pci 0000:00:0a.0: PME# disabled [ 0.739248] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd007] [ 0.739257] pci 0000:00:0b.0: reg 14 io port: [0xcc00-0xcc03] [ 0.739265] pci 0000:00:0b.0: reg 18 io port: [0xc880-0xc887] [ 0.739273] pci 0000:00:0b.0: reg 1c io port: [0xc800-0xc803] [ 0.739281] pci 0000:00:0b.0: reg 20 io port: [0xc480-0xc48f] [ 0.739290] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae76000-0xfae77fff] [ 0.739453] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739464] pci 0000:00:0c.0: PME# disabled [ 0.739541] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739547] pci 0000:00:10.0: PME# disabled [ 0.739711] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739721] pci 0000:00:15.0: PME# disabled [ 0.739901] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739912] pci 0000:00:16.0: PME# disabled [ 0.740104] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740115] pci 0000:00:17.0: PME# disabled [ 0.740291] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740302] pci 0000:00:18.0: PME# disabled [ 0.740402] pci 0000:00:09.0: transparent bridge [ 0.740547] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.740562] pci 0000:03:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.740576] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.740585] pci 0000:03:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.740595] pci 0000:03:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff] [ 0.740651] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.740658] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.740666] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff] [ 0.740817] pci 0000:05:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff] [ 0.740939] pci 0000:00:16.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.741216] bus 00 -> node 0 [ 0.741232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.741767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT] [ 0.742139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.742388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 0.742695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.742989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.743282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.743574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.764970] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) 0, disabled. [ 0.765634] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) 0, disabled. [ 0.766292] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) 0, disabled. [ 0.766951] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) 0, disabled. [ 0.767616] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) 0, disabled. [ 0.768304] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) 0, disabled. [ 0.768976] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) 0, disabled. [ 0.769638] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) 0, disabled. [ 0.770298] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) 0, disabled. [ 0.770956] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) 0, disabled. [ 0.771617] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) 0, disabled. [ 0.772295] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) 0, disabled. [ 0.772965] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) 0, disabled. [ 0.773627] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) 0, disabled. [ 0.774285] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) 0, disabled. [ 0.774946] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) 0, disabled. [ 0.775608] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) 0, disabled. [ 0.776286] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) 0, disabled. [ 0.776953] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) 0, disabled. [ 0.777615] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) 0, disabled. [ 0.778287] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) 9 [ 0.778951] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) 0, disabled. [ 0.779608] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) 0, disabled. [ 0.780287] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) 0, disabled. [ 0.780957] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) 0, disabled. [ 0.781616] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) 0, disabled. [ 0.782278] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) 0, disabled. [ 0.782940] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) 0, disabled. [ 0.783600] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) 0, disabled. [ 0.784280] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) 0, disabled. [ 0.784948] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) 0, disabled. [ 0.785611] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) 0, disabled. [ 0.786283] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) 9 [ 0.786953] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) 15 [ 0.787625] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) 11 [ 0.788314] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) 10 [ 0.788993] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) 7 [ 0.789670] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) 10 [ 0.790339] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) 11 [ 0.791010] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) 5 [ 0.791786] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) 0, disabled. [ 0.792474] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) 0, disabled. [ 0.793141] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) 0, disabled. [ 0.793816] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) 10 [ 0.794487] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) 0, disabled. [ 0.795153] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) 0, disabled. [ 0.795836] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) 11 [ 0.796539] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) 9 [ 0.797215] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) 15 [ 0.797894] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) 14 [ 0.798518] ACPI: WMI: Mapper loaded [ 0.798649] SCSI subsystem initialized [ 0.798649] libata version 3.00 loaded. [ 0.798649] usbcore: registered new interface driver usbfs [ 0.798649] usbcore: registered new interface driver hub [ 0.798649] usbcore: registered new device driver usb [ 0.798649] PCI: Using ACPI for IRQ routing [ 0.804021] Bluetooth: Core ver 2.13 [ 0.804063] NET: Registered protocol family 31 [ 0.804063] Bluetooth: HCI device and connection manager initialized [ 0.804063] Bluetooth: HCI socket layer initialized [ 0.804063] NET: Registered protocol family 8 [ 0.804063] NET: Registered protocol family 20 [ 0.804077] NetLabel: Initializing [ 0.804080] NetLabel: domain hash size = 128 [ 0.804084] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.804108] NetLabel: unlabeled traffic allowed by default [ 0.804138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.804150] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.808114] AppArmor: AppArmor Filesystem Enabled [ 0.812017] Switched to high resolution mode on CPU 0 [ 0.812404] Switched to high resolution mode on CPU 1 [ 0.816028] pnp: PnP ACPI init [ 0.816051] ACPI: bus type pnp registered [ 0.830426] pnp: PnP ACPI: found 10 devices [ 0.830432] ACPI: ACPI bus type pnp unregistered [ 0.830438] PnPBIOS: Disabled by ACPI PNP [ 0.830463] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.830469] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.830475] system 00:04: ioport range 0x4000-0x407f has been reserved [ 0.830480] system 00:04: ioport range 0x4080-0x40ff has been reserved [ 0.830486] system 00:04: ioport range 0x4400-0x447f has been reserved [ 0.830492] system 00:04: ioport range 0x4480-0x44ff has been reserved [ 0.830498] system 00:04: ioport range 0x4800-0x487f has been reserved [ 0.830503] system 00:04: ioport range 0x4880-0x48ff has been reserved [ 0.830511] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved [ 0.830517] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.830524] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.830537] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.830543] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.830555] system 00:08: iomem range 0xfc000000-0xfdffffff has been reserved [ 0.830567] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.830573] system 00:09: iomem range 0xc0000-0xcffff could not be reserved [ 0.830579] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.830585] system 00:09: iomem range 0x100000-0x7fffffff could not be reserved [ 0.830591] system 00:09: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.865535] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.865540] pci 0000:00:09.0: IO window: disabled [ 0.865548] pci 0000:00:09.0: MEM window: disabled [ 0.865554] pci 0000:00:09.0: PREFETCH window: disabled [ 0.865562] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02 [ 0.865566] pci 0000:00:0c.0: IO window: disabled [ 0.865579] pci 0000:00:0c.0: MEM window: disabled [ 0.865589] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.865606] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.865612] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.865619] pci 0000:00:10.0: MEM window: 0xfaf00000-0xfbffffff [ 0.865626] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f9ffffff [ 0.865634] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.865638] pci 0000:00:15.0: IO window: disabled [ 0.865651] pci 0000:00:15.0: MEM window: disabled [ 0.865660] pci 0000:00:15.0: PREFETCH window: disabled [ 0.865677] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05 [ 0.865681] pci 0000:00:16.0: IO window: disabled [ 0.865695] pci 0000:00:16.0: MEM window: 0xfeb00000-0xfebfffff [ 0.865705] pci 0000:00:16.0: PREFETCH window: disabled [ 0.865721] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06 [ 0.865725] pci 0000:00:17.0: IO window: disabled [ 0.865738] pci 0000:00:17.0: MEM window: disabled [ 0.865748] pci 0000:00:17.0: PREFETCH window: disabled [ 0.865764] pci 0000:00:18.0: PCI bridge, secondary bus 0000:07 [ 0.865768] pci 0000:00:18.0: IO window: disabled [ 0.865781] pci 0000:00:18.0: MEM window: disabled [ 0.865791] pci 0000:00:18.0: PREFETCH window: disabled [ 0.865816] pci 0000:00:09.0: setting latency timer to 64 [ 0.866755] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23 [ 0.866769] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23 [ 0.866782] pci 0000:00:0c.0: setting latency timer to 64 [ 0.866795] pci 0000:00:10.0: setting latency timer to 64 [ 0.867702] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22 [ 0.867712] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22 [ 0.867725] pci 0000:00:15.0: setting latency timer to 64 [ 0.868659] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21 [ 0.868669] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21 [ 0.868682] pci 0000:00:16.0: setting latency timer to 64 [ 0.869586] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20 [ 0.869596] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20 [ 0.869609] pci 0000:00:17.0: setting latency timer to 64 [ 0.870514] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23 [ 0.870522] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23 [ 0.870534] pci 0000:00:18.0: setting latency timer to 64 [ 0.870544] bus: 00 index 0 io port: [0x00-0xffff] [ 0.870549] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.870553] bus: 01 index 0 mmio: [0x0-0x0] [ 0.870557] bus: 01 index 1 mmio: [0x0-0x0] [ 0.870561] bus: 01 index 2 mmio: [0x0-0x0] [ 0.870566] bus: 01 index 3 io port: [0x00-0xffff] [ 0.870570] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.870575] bus: 02 index 0 mmio: [0x0-0x0] [ 0.870578] bus: 02 index 1 mmio: [0x0-0x0] [ 0.870582] bus: 02 index 2 mmio: [0x0-0x0] [ 0.870586] bus: 02 index 3 mmio: [0x0-0x0] [ 0.870591] bus: 03 index 0 io port: [0xe000-0xefff] [ 0.870595] bus: 03 index 1 mmio: [0xfaf00000-0xfbffffff] [ 0.870600] bus: 03 index 2 mmio: [0xe0000000-0xf9ffffff] [ 0.870604] bus: 03 index 3 mmio: [0x0-0x0] [ 0.870609] bus: 04 index 0 mmio: [0x0-0x0] [ 0.870612] bus: 04 index 1 mmio: [0x0-0x0] [ 0.870616] bus: 04 index 2 mmio: [0x0-0x0] [ 0.870620] bus: 04 index 3 mmio: [0x0-0x0] [ 0.870624] bus: 05 index 0 mmio: [0x0-0x0] [ 0.870629] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff] [ 0.870633] bus: 05 index 2 mmio: [0x0-0x0] [ 0.870637] bus: 05 index 3 mmio: [0x0-0x0] [ 0.870641] bus: 06 index 0 mmio: [0x0-0x0] [ 0.870645] bus: 06 index 1 mmio: [0x0-0x0] [ 0.870648] bus: 06 index 2 mmio: [0x0-0x0] [ 0.870652] bus: 06 index 3 mmio: [0x0-0x0] [ 0.870656] bus: 07 index 0 mmio: [0x0-0x0] [ 0.870660] bus: 07 index 1 mmio: [0x0-0x0] [ 0.870664] bus: 07 index 2 mmio: [0x0-0x0] [ 0.870668] bus: 07 index 3 mmio: [0x0-0x0] [ 0.870689] NET: Registered protocol family 2 [ 0.884131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.884664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.885452] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.885873] TCP: Hash tables configured (established 131072 bind 65536) [ 0.885879] TCP reno registered [ 0.892205] NET: Registered protocol family 1 [ 0.892417] checking if image is initramfs... it is [ 1.914907] Freeing initrd memory: 7633k freed [ 1.915286] cpufreq: No nForce2 chipset. [ 1.915548] audit: initializing netlink socket (disabled) [ 1.915583] type=2000 audit(1252402300.912:1): initialized [ 1.929891] highmem bounce pool size: 64 pages [ 1.929907] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.932669] VFS: Disk quotas dquot_6.5.1 [ 1.932793] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.934107] fuse init (API version 7.10) [ 1.934282] msgmni has been set to 1704 [ 1.934630] alg: No test for stdrng (krng) [ 1.934663] io scheduler noop registered [ 1.934668] io scheduler anticipatory registered [ 1.934672] io scheduler deadline registered [ 1.934710] io scheduler cfq registered (default) [ 1.957862] pci 0000:03:00.0: Boot video device [ 1.979857] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.980041] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.980142] pcieport-driver 0000:00:0c.0: irq 2303 for MSI/MSI-X [ 1.980184] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.980409] pcieport-driver 0000:00:15.0: setting latency timer to 64 [ 1.980594] pcieport-driver 0000:00:15.0: found MSI capability [ 1.980696] pcieport-driver 0000:00:15.0: irq 2302 for MSI/MSI-X [ 1.980739] pci_express 0000:00:15.0:pcie00: allocate port service [ 1.980938] pcieport-driver 0000:00:16.0: setting latency timer to 64 [ 1.981107] pcieport-driver 0000:00:16.0: found MSI capability [ 1.981201] pcieport-driver 0000:00:16.0: irq 2301 for MSI/MSI-X [ 1.981242] pci_express 0000:00:16.0:pcie00: allocate port service [ 1.981448] pcieport-driver 0000:00:17.0: setting latency timer to 64 [ 1.981616] pcieport-driver 0000:00:17.0: found MSI capability [ 1.981710] pcieport-driver 0000:00:17.0: irq 2300 for MSI/MSI-X [ 1.981750] pci_express 0000:00:17.0:pcie00: allocate port service [ 1.981948] pcieport-driver 0000:00:18.0: setting latency timer to 64 [ 1.982122] pcieport-driver 0000:00:18.0: found MSI capability [ 1.982220] pcieport-driver 0000:00:18.0: irq 2299 for MSI/MSI-X [ 1.982261] pci_express 0000:00:18.0:pcie00: allocate port service [ 1.982458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.982478] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.982742] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.982748] ACPI: Power Button (FF) [PWRF] [ 1.982848] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.982854] ACPI: Power Button (CM) [PWRB] [ 1.984150] processor ACPI_CPU:00: registered as cooling_device0 [ 1.984159] ACPI: Processor [P001] (supports 8 throttling states) [ 1.984834] processor ACPI_CPU:01: registered as cooling_device1 [ 1.984842] ACPI: Processor [P002] (supports 8 throttling states) [ 1.997536] isapnp: Scanning for PnP cards... [ 2.350563] isapnp: No Plug & Play device found [ 2.361106] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.362974] brd: module loaded [ 2.363654] loop: module loaded [ 2.363803] Fixed MDIO Bus: probed [ 2.363816] PPP generic driver version 2.4.2 [ 2.363939] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.364002] Driver 'sd' needs updating - please use bus_type methods [ 2.364032] Driver 'sr' needs updating - please use bus_type methods [ 2.364125] ahci 0000:00:0b.0: version 3.0 [ 2.365106] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 2.365115] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 2.365205] ahci 0000:00:0b.0: irq 2298 for MSI/MSI-X [ 2.365317] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.365324] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part [ 2.365331] ahci 0000:00:0b.0: setting latency timer to 64 [ 2.366199] scsi0 : ahci [ 2.366442] scsi1 : ahci [ 2.366566] scsi2 : ahci [ 2.366707] scsi3 : ahci [ 2.366852] scsi4 : ahci [ 2.367000] scsi5 : ahci [ 2.367262] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 2298 [ 2.367269] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 2298 [ 2.367275] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 2298 [ 2.367281] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 2298 [ 2.367286] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 2298 [ 2.367292] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 2298 [ 2.684023] ata1: SATA link down (SStatus 0 SControl 300) [ 3.168023] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.168888] ata2.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133 [ 3.168894] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.170010] ata2.00: configured for UDMA/133 [ 3.488022] ata3: SATA link down (SStatus 0 SControl 300) [ 3.808022] ata4: SATA link down (SStatus 0 SControl 300) [ 4.128022] ata5: SATA link down (SStatus 0 SControl 300) [ 4.448022] ata6: SATA link down (SStatus 0 SControl 300) [ 4.448233] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 [ 4.448441] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4.448484] sd 1:0:0:0: [sda] Write Protect is off [ 4.448490] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.448582] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.448730] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4.448770] sd 1:0:0:0: [sda] Write Protect is off [ 4.448776] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.448845] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.448854] sda: sda1 sda2 sda3 [ 4.473744] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.473841] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.475304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.476349] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 4.476358] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 4.476393] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 4.476399] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 4.476532] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 4.476579] ehci_hcd 0000:00:04.1: debug port 1 [ 4.476587] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 4.476614] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfae7ec00 [ 4.488019] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 4.488162] usb usb1: configuration #1 chosen from 1 choice [ 4.488228] hub 1-0:1.0: USB hub found [ 4.488244] hub 1-0:1.0: 12 ports detected [ 4.488477] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.489440] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 4.489449] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 4.489478] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 4.489484] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 4.489584] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 4.489620] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfae7f000 [ 4.546125] usb usb2: configuration #1 chosen from 1 choice [ 4.546182] hub 2-0:1.0: USB hub found [ 4.546200] hub 2-0:1.0: 12 ports detected [ 4.546391] uhci_hcd: USB Universal Host Controller Interface driver [ 4.546554] PNP: No PS/2 controller found. Probing ports directly. [ 4.548042] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.548057] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.552092] mice: PS/2 mouse device common for all mice [ 4.564129] rtc_cmos 00:06: RTC can wake from S4 [ 4.564196] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.564255] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 4.564396] device-mapper: uevent: version 1.0.3 [ 4.564600] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 4.564769] device-mapper: multipath: version 1.0.5 loaded [ 4.564777] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.564962] EISA: Probing bus 0 at eisa.0 [ 4.564982] Cannot allocate resource for EISA slot 4 [ 4.565001] EISA: Detected 0 cards. [ 4.565102] cpuidle: using governor ladder [ 4.565108] cpuidle: using governor menu [ 4.566212] TCP cubic registered [ 4.566437] NET: Registered protocol family 10 [ 4.567293] lo: Disabled Privacy Extensions [ 4.567941] NET: Registered protocol family 17 [ 4.567980] Bluetooth: L2CAP ver 2.11 [ 4.567984] Bluetooth: L2CAP socket layer initialized [ 4.567990] Bluetooth: SCO (Voice Link) ver 0.6 [ 4.567993] Bluetooth: SCO socket layer initialized [ 4.568095] Bluetooth: RFCOMM socket layer initialized [ 4.568112] Bluetooth: RFCOMM TTY layer initialized [ 4.568117] Bluetooth: RFCOMM ver 1.10 [ 4.568224] Using IPI No-Shortcut mode [ 4.568393] registered taskstats version 1 [ 4.568660] Magic number: 9:50:525 [ 4.568801] rtc_cmos 00:06: setting system clock to 2009-09-08 09:31:44 UTC (1252402304) [ 4.568810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.568815] EDD information not available. [ 4.569199] Freeing unused kernel memory: 532k freed [ 4.569482] Write protecting the kernel text: 4116k [ 4.569580] Write protecting the kernel read-only data: 1528k [ 4.856549] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 5.014170] usb 1-2: configuration #1 chosen from 1 choice [ 5.153908] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.155062] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 5.155073] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 5.155084] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 5.156829] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:22:68:65:0d:a7 [ 5.156838] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 5.372589] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 5.613201] usb 2-1: configuration #1 chosen from 1 choice [ 5.668796] Initializing USB Mass Storage driver... [ 5.677432] usbcore: registered new interface driver hiddev [ 5.677687] scsi6 : SCSI emulation for USB Mass Storage devices [ 5.677852] usb-storage: device found at 3 [ 5.677859] usb-storage: waiting for device to settle before scanning [ 5.677895] usbcore: registered new interface driver usb-storage [ 5.677902] USB Mass Storage support registered. [ 5.683757] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3 [ 5.688716] generic-usb 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:04.0-1/input0 [ 5.688768] usbcore: registered new interface driver usbhid [ 5.688778] usbhid: v2.6:USB HID core driver [ 5.920046] usb 2-3: new low speed USB device using ohci_hcd and address 3 [ 6.152124] usb 2-3: configuration #1 chosen from 1 choice [ 6.167480] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.0/input/input4 [ 6.172194] generic-usb 0003:04F2:0402.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:04.0-3/input0 [ 6.199126] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.1/input/input5 [ 6.208771] generic-usb 0003:04F2:0402.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:04.0-3/input1 [ 6.221332] kjournald starting. Commit interval 5 seconds [ 6.221360] EXT3-fs: mounted filesystem with ordered data mode. [ 10.676792] usb-storage: device scan complete [ 10.678639] scsi 6:0:0:0: Direct-Access WD 10EAVS External 1.75 PQ: 0 ANSI: 4 [ 10.680365] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 10.681496] sd 6:0:0:0: [sdb] Write Protect is off [ 10.681525] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 10.681530] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 10.682232] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 10.683499] sd 6:0:0:0: [sdb] Write Protect is off [ 10.683507] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 10.683512] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 10.683523] sdb: sdb1 [ 10.693375] sd 6:0:0:0: [sdb] Attached SCSI disk [ 10.693490] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 12.657882] udev: starting version 141 [ 13.799492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.932619] cfg80211: Calling CRDA to update world regulatory domain [ 13.983373] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 14.011874] acer-wmi: Acer Laptop ACPI-WMI Extras [ 14.011907] acer-wmi: No or unsupported WMI interface, unable to load [ 14.090742] cfg80211: World regulatory domain updated: [ 14.090750] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.090757] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.090762] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.090768] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.090773] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.090778] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.201571] Linux agpgart interface v0.103 [ 14.537350] nvidia: module license 'NVIDIA' taints kernel. [ 14.571640] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19 [ 14.571659] ath5k_pci 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19 [ 14.571677] ath5k_pci 0000:05:00.0: setting latency timer to 64 [ 14.572091] ath5k_pci 0000:05:00.0: registered as 'phy0' [ 14.622707] phy0: Selected rate control algorithm 'pid' [ 14.778358] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 14.803325] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22 [ 14.803337] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22 [ 14.803354] nvidia 0000:03:00.0: setting latency timer to 64 [ 14.804414] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 14.873845] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 14.875047] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 14.875060] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 14.875143] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 15.930459] lp: driver loaded but no devices found [ 16.689389] EXT3 FS on loop0, internal journal [ 24.489704] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k [ 24.918825] type=1505 audit(1252395124.847:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2080 [ 24.919098] type=1505 audit(1252395124.847:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2080 [ 24.919210] type=1505 audit(1252395124.847:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2080 [ 24.919312] type=1505 audit(1252395124.847:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2080 [ 25.234301] type=1505 audit(1252395125.163:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2085 [ 25.234705] type=1505 audit(1252395125.163:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2085 [ 25.315009] type=1505 audit(1252395125.243:8): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2089 [ 25.376639] type=1505 audit(1252395125.307:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2093 [ 33.425840] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.425848] Bluetooth: BNEP filters: protocol multicast [ 33.469307] Bridge firewalling registered [ 34.306180] ppdev: user-space parallel port driver [ 38.074563] eth0: no link during initialization. [ 38.075385] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.136589] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 51.665080] CPU0 attaching NULL sched-domain. [ 51.665090] CPU1 attaching NULL sched-domain. [ 51.668793] CPU0 attaching sched-domain: [ 51.668799] domain 0: span 0-1 level SIBLING [ 51.668805] groups: 0 1 [ 51.668816] CPU1 attaching sched-domain: [ 51.668820] domain 0: span 0-1 level SIBLING [ 51.668825] groups: 1 0 [ 102.181144] wlan0: authenticate with AP 00:24:fe:08:4d:64 [ 102.182985] wlan0: authenticated [ 102.183000] wlan0: associate with AP 00:24:fe:08:4d:64 [ 102.188748] wlan0: RX AssocResp from 00:24:fe:08:4d:64 (capab=0x411 status=0 aid=2) [ 102.188757] wlan0: associated [ 102.189426] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 104.331270] padlock: VIA PadLock not detected. [ 112.432022] wlan0: no IPv6 routers present [ 135.017419] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 2088.957320] ath5k phy0: noise floor calibration timeout (2427MHz) [ 2091.028736] ath5k phy0: noise floor calibration timeout (2427MHz) [51953.816049] usb 1-6: new high speed USB device using ehci_hcd and address 5 [51953.956130] usb 1-6: configuration #1 chosen from 1 choice [51955.180807] Linux video capture interface: v2.00 [51955.344844] em28xx v4l2 driver version 0.0.1 loaded [51955.347686] em28xx: new video device (0ccd:0072): interface 0, class 255 [51955.347695] em28xx: device is attached to a USB 2.0 bus [51955.347705] em28xx #0: Alternate settings: 8 [51955.347711] em28xx #0: Alternate setting 0, max size= 0 [51955.347716] em28xx #0: Alternate setting 1, max size= 0 [51955.347722] em28xx #0: Alternate setting 2, max size= 1448 [51955.347728] em28xx #0: Alternate setting 3, max size= 2048 [51955.347734] em28xx #0: Alternate setting 4, max size= 2304 [51955.347740] em28xx #0: Alternate setting 5, max size= 2580 [51955.347746] em28xx #0: Alternate setting 6, max size= 2892 [51955.347753] em28xx #0: Alternate setting 7, max size= 3072 [51955.593554] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.595108] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.596223] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.598362] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [51955.598809] cx25843.c: detecting cx25843 client on address 0x88 [51955.598869] attach_inform: msp34xx/cx25843 detected. [51957.269715] trying to attach xc5000 [51957.332296] attaching xc5000 tuner module [51958.880132] successfully attached tuner [51958.880283] radio device registered as /dev/radio0 [51958.884721] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [51958.892754] em28xx #0: V4L2 device registered as /dev/video0 [51958.892890] input: em2880/em2870 remote control as /devices/virtual/input/input7 [51958.902286] em28xx-input.c: remote control handler attached [51958.902293] em28xx #0: Found Terratec Hybrid XS FM (em2883) [51958.902333] usbcore: registered new interface driver em28xx [51959.091167] em28xx-audio.c: probing for em28x1 non standard usbaudio [51959.091176] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [51959.096227] Em28xx: Initialized (Em28xx Audio Extension) extension [51960.609271] opening radio device and trying to acquire exclusive lock [51960.609283] em28xx-audio: device is currently in analogue FM mode [51960.609290] device is locked in fmradio mode now [51960.613502] changing alternate number to 7 [52163.769216] usb 1-6: USB disconnect, address 5 [52163.787160] em28xx-input.c: remote control handler detached [52163.787170] audio: deinitializing audio device [52163.787175] audio: before waitstream [52163.787178] audio: after waitstream [52163.787182] audio: waiting for audioclients to release audio node [52163.787684] em28xx #0: disconnecting em28xx#0 video [52163.787692] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered [52163.787790] em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered [52163.787954] cx25843.c: removing cx25843 adapter on address 0x88 Beim zweiten Einstecken wieder der Fehler wie im Startpost: [ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] BIOS-e820: 000000006ff90000 - 000000006ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ff9e000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x6ff90 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006ff90000 (usable) [ 0.000000] modified: 000000006ff90000 - 000000006ff9e000 (ACPI data) [ 0.000000] modified: 000000006ff9e000 - 000000006ffe0000 (ACPI NVS) [ 0.000000] modified: 000000006ffe0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 6f80b000 - 6ff7f589 [ 0.000000] Allocated new RAMDISK: 0087d000 - 00ff1589 [ 0.000000] Move RAMDISK from 000000006f80b000 - 000000006ff7f588 to 0087d000 - 00ff1588 [ 0.000000] ACPI: RSDP 000FB160, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 6FF90100, 006C (r1 ACRSYS ACRPRDCT 20090430 MSFT 97) [ 0.000000] ACPI: FACP 6FF90290, 00F4 (r3 ACRSYS FACP1945 20090430 MSFT 97) [ 0.000000] ACPI: DSDT 6FF90620, 69BE (r1 8C8A1 8C8A1P04 4 INTL 20051117) [ 0.000000] ACPI: FACS 6FF9E000, 0040 [ 0.000000] ACPI: APIC 6FF90390, 0080 (r1 ACRSYS APIC1945 20090430 MSFT 97) [ 0.000000] ACPI: MCFG 6FF90410, 003C (r1 ACRSYS OEMMCFG 20090430 MSFT 97) [ 0.000000] ACPI: SLIC 6FF90450, 0176 (r1 ACRSYS ACRPRDCT 20090430 MSFT 97) [ 0.000000] ACPI: WDRT 6FF905D0, 0047 (r1 ACRSYS NV-WDRT 20090430 MSFT 97) [ 0.000000] ACPI: OEMB 6FF9E040, 0079 (r1 ACRSYS OEMB1945 20090430 MSFT 97) [ 0.000000] ACPI: HPET 6FF9A620, 0038 (r1 ACRSYS OEMHPET0 20090430 MSFT 97) [ 0.000000] ACPI: NVHD 6FF9E0C0, 0284 (r1 ACRSYS NVHDCP 20090430 MSFT 97) [ 0.000000] ACPI: AWMI 6FF9E350, 004E (r1 ACRSYS OEMB1945 20090430 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 907MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0000ff1589] NEW RAMDISK ==> [000087d000 - 0000ff1589] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0006ff90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0006ff90 [ 0.000000] On node 0 totalpages: 458526 [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1816 pages used for memmap [ 0.000000] HighMem zone: 230522 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454942 [ 0.000000] Kernel command line: root=UUID=CA9051CE9051C19D loop=/ubuntu/disks/root.disk ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.074 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 9172480 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1793616k/1834560k available (4115k kernel code, 39624k reserved, 2199k data, 532k init, 929352k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.14 BogoMIPS (lpj=6400296) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.019703] ACPI: Core revision 20080926 [ 0.022884] ACPI: Checking initramfs for custom DSDT [ 0.522094] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.561799] CPU0: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.564002] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3199.91 BogoMIPS (lpj=6399828) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.652293] CPU1: Intel(R) Atom(TM) CPU 230 @ 1.60GHz stepping 02 [ 0.652335] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.656067] Brought up 2 CPUs [ 0.656074] Total of 2 processors activated (6400.06 BogoMIPS). [ 0.656158] CPU0 attaching sched-domain: [ 0.656163] domain 0: span 0-1 level SIBLING [ 0.656168] groups: 0 1 [ 0.656179] CPU1 attaching sched-domain: [ 0.656183] domain 0: span 0-1 level SIBLING [ 0.656187] groups: 1 0 [ 0.656321] net_namespace: 776 bytes [ 0.656321] Booting paravirtualized kernel on bare hardware [ 0.656693] Time: 9:31:40 Date: 09/08/09 [ 0.656693] regulator: core version 0.5 [ 0.656693] NET: Registered protocol family 16 [ 0.656693] EISA bus registered [ 0.656693] ACPI: bus type pci registered [ 0.656693] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.656693] PCI: Not using MMCONFIG. [ 0.656854] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7 [ 0.656859] PCI: Using configuration type 1 for base access [ 0.662223] ACPI: EC: Look up EC in DSDT [ 0.691010] ACPI: Interpreter enabled [ 0.691018] ACPI: (supports S0 S1 S3 S4 S5) [ 0.691063] ACPI: Using IOAPIC for interrupt routing [ 0.691198] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.705254] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources [ 0.705260] PCI: Using MMCONFIG for extended config space [ 0.737966] ACPI: No dock devices found. [ 0.738150] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.738444] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff] [ 0.738571] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f] [ 0.738592] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f] [ 0.738600] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f] [ 0.738619] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.738628] pci 0000:00:03.2: PME# disabled [ 0.738767] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff] [ 0.738869] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff] [ 0.738903] pci 0000:00:04.0: supports D1 D2 [ 0.738907] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738914] pci 0000:00:04.0: PME# disabled [ 0.738951] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff] [ 0.738988] pci 0000:00:04.1: supports D1 D2 [ 0.738992] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.738998] pci 0000:00:04.1: PME# disabled [ 0.739043] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff] [ 0.739078] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.739084] pci 0000:00:08.0: PME# disabled [ 0.739151] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfae7d000-0xfae7dfff] [ 0.739160] pci 0000:00:0a.0: reg 14 io port: [0xd080-0xd087] [ 0.739168] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfae7e800-0xfae7e8ff] [ 0.739177] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfae7e400-0xfae7e40f] [ 0.739199] pci 0000:00:0a.0: supports D1 D2 [ 0.739203] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739211] pci 0000:00:0a.0: PME# disabled [ 0.739248] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd007] [ 0.739257] pci 0000:00:0b.0: reg 14 io port: [0xcc00-0xcc03] [ 0.739265] pci 0000:00:0b.0: reg 18 io port: [0xc880-0xc887] [ 0.739273] pci 0000:00:0b.0: reg 1c io port: [0xc800-0xc803] [ 0.739281] pci 0000:00:0b.0: reg 20 io port: [0xc480-0xc48f] [ 0.739290] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae76000-0xfae77fff] [ 0.739453] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739464] pci 0000:00:0c.0: PME# disabled [ 0.739541] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739547] pci 0000:00:10.0: PME# disabled [ 0.739711] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739721] pci 0000:00:15.0: PME# disabled [ 0.739901] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.739912] pci 0000:00:16.0: PME# disabled [ 0.740104] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740115] pci 0000:00:17.0: PME# disabled [ 0.740291] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.740302] pci 0000:00:18.0: PME# disabled [ 0.740402] pci 0000:00:09.0: transparent bridge [ 0.740547] pci 0000:03:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.740562] pci 0000:03:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.740576] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.740585] pci 0000:03:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.740595] pci 0000:03:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff] [ 0.740651] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.740658] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.740666] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff] [ 0.740817] pci 0000:05:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff] [ 0.740939] pci 0000:00:16.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.741216] bus 00 -> node 0 [ 0.741232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.741767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT] [ 0.742139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.742388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] [ 0.742695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.742989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.743282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.743574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.764970] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) 0, disabled. [ 0.765634] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) 0, disabled. [ 0.766292] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) 0, disabled. [ 0.766951] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) 0, disabled. [ 0.767616] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) 0, disabled. [ 0.768304] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) 0, disabled. [ 0.768976] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) 0, disabled. [ 0.769638] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) 0, disabled. [ 0.770298] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) 0, disabled. [ 0.770956] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) 0, disabled. [ 0.771617] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) 0, disabled. [ 0.772295] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) 0, disabled. [ 0.772965] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) 0, disabled. [ 0.773627] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) 0, disabled. [ 0.774285] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) 0, disabled. [ 0.774946] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) 0, disabled. [ 0.775608] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) 0, disabled. [ 0.776286] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) 0, disabled. [ 0.776953] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) 0, disabled. [ 0.777615] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) 0, disabled. [ 0.778287] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) 9 [ 0.778951] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) 0, disabled. [ 0.779608] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) 0, disabled. [ 0.780287] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) 0, disabled. [ 0.780957] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) 0, disabled. [ 0.781616] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) 0, disabled. [ 0.782278] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) 0, disabled. [ 0.782940] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) 0, disabled. [ 0.783600] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) 0, disabled. [ 0.784280] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) 0, disabled. [ 0.784948] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) 0, disabled. [ 0.785611] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) 0, disabled. [ 0.786283] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) 9 [ 0.786953] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) 15 [ 0.787625] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) 11 [ 0.788314] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) 10 [ 0.788993] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) 7 [ 0.789670] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) 10 [ 0.790339] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) 11 [ 0.791010] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) 5 [ 0.791786] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) 0, disabled. [ 0.792474] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) 0, disabled. [ 0.793141] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) 0, disabled. [ 0.793816] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) 10 [ 0.794487] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) 0, disabled. [ 0.795153] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) 0, disabled. [ 0.795836] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) 11 [ 0.796539] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) 9 [ 0.797215] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) 15 [ 0.797894] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) 14 [ 0.798518] ACPI: WMI: Mapper loaded [ 0.798649] SCSI subsystem initialized [ 0.798649] libata version 3.00 loaded. [ 0.798649] usbcore: registered new interface driver usbfs [ 0.798649] usbcore: registered new interface driver hub [ 0.798649] usbcore: registered new device driver usb [ 0.798649] PCI: Using ACPI for IRQ routing [ 0.804021] Bluetooth: Core ver 2.13 [ 0.804063] NET: Registered protocol family 31 [ 0.804063] Bluetooth: HCI device and connection manager initialized [ 0.804063] Bluetooth: HCI socket layer initialized [ 0.804063] NET: Registered protocol family 8 [ 0.804063] NET: Registered protocol family 20 [ 0.804077] NetLabel: Initializing [ 0.804080] NetLabel: domain hash size = 128 [ 0.804084] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.804108] NetLabel: unlabeled traffic allowed by default [ 0.804138] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.804150] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.808114] AppArmor: AppArmor Filesystem Enabled [ 0.812017] Switched to high resolution mode on CPU 0 [ 0.812404] Switched to high resolution mode on CPU 1 [ 0.816028] pnp: PnP ACPI init [ 0.816051] ACPI: bus type pnp registered [ 0.830426] pnp: PnP ACPI: found 10 devices [ 0.830432] ACPI: ACPI bus type pnp unregistered [ 0.830438] PnPBIOS: Disabled by ACPI PNP [ 0.830463] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.830469] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.830475] system 00:04: ioport range 0x4000-0x407f has been reserved [ 0.830480] system 00:04: ioport range 0x4080-0x40ff has been reserved [ 0.830486] system 00:04: ioport range 0x4400-0x447f has been reserved [ 0.830492] system 00:04: ioport range 0x4480-0x44ff has been reserved [ 0.830498] system 00:04: ioport range 0x4800-0x487f has been reserved [ 0.830503] system 00:04: ioport range 0x4880-0x48ff has been reserved [ 0.830511] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved [ 0.830517] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.830524] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.830537] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.830543] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.830555] system 00:08: iomem range 0xfc000000-0xfdffffff has been reserved [ 0.830567] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.830573] system 00:09: iomem range 0xc0000-0xcffff could not be reserved [ 0.830579] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.830585] system 00:09: iomem range 0x100000-0x7fffffff could not be reserved [ 0.830591] system 00:09: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.865535] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.865540] pci 0000:00:09.0: IO window: disabled [ 0.865548] pci 0000:00:09.0: MEM window: disabled [ 0.865554] pci 0000:00:09.0: PREFETCH window: disabled [ 0.865562] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02 [ 0.865566] pci 0000:00:0c.0: IO window: disabled [ 0.865579] pci 0000:00:0c.0: MEM window: disabled [ 0.865589] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.865606] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.865612] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.865619] pci 0000:00:10.0: MEM window: 0xfaf00000-0xfbffffff [ 0.865626] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f9ffffff [ 0.865634] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.865638] pci 0000:00:15.0: IO window: disabled [ 0.865651] pci 0000:00:15.0: MEM window: disabled [ 0.865660] pci 0000:00:15.0: PREFETCH window: disabled [ 0.865677] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05 [ 0.865681] pci 0000:00:16.0: IO window: disabled [ 0.865695] pci 0000:00:16.0: MEM window: 0xfeb00000-0xfebfffff [ 0.865705] pci 0000:00:16.0: PREFETCH window: disabled [ 0.865721] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06 [ 0.865725] pci 0000:00:17.0: IO window: disabled [ 0.865738] pci 0000:00:17.0: MEM window: disabled [ 0.865748] pci 0000:00:17.0: PREFETCH window: disabled [ 0.865764] pci 0000:00:18.0: PCI bridge, secondary bus 0000:07 [ 0.865768] pci 0000:00:18.0: IO window: disabled [ 0.865781] pci 0000:00:18.0: MEM window: disabled [ 0.865791] pci 0000:00:18.0: PREFETCH window: disabled [ 0.865816] pci 0000:00:09.0: setting latency timer to 64 [ 0.866755] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23 [ 0.866769] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23 [ 0.866782] pci 0000:00:0c.0: setting latency timer to 64 [ 0.866795] pci 0000:00:10.0: setting latency timer to 64 [ 0.867702] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22 [ 0.867712] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22 [ 0.867725] pci 0000:00:15.0: setting latency timer to 64 [ 0.868659] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21 [ 0.868669] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21 [ 0.868682] pci 0000:00:16.0: setting latency timer to 64 [ 0.869586] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20 [ 0.869596] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20 [ 0.869609] pci 0000:00:17.0: setting latency timer to 64 [ 0.870514] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23 [ 0.870522] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23 [ 0.870534] pci 0000:00:18.0: setting latency timer to 64 [ 0.870544] bus: 00 index 0 io port: [0x00-0xffff] [ 0.870549] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.870553] bus: 01 index 0 mmio: [0x0-0x0] [ 0.870557] bus: 01 index 1 mmio: [0x0-0x0] [ 0.870561] bus: 01 index 2 mmio: [0x0-0x0] [ 0.870566] bus: 01 index 3 io port: [0x00-0xffff] [ 0.870570] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.870575] bus: 02 index 0 mmio: [0x0-0x0] [ 0.870578] bus: 02 index 1 mmio: [0x0-0x0] [ 0.870582] bus: 02 index 2 mmio: [0x0-0x0] [ 0.870586] bus: 02 index 3 mmio: [0x0-0x0] [ 0.870591] bus: 03 index 0 io port: [0xe000-0xefff] [ 0.870595] bus: 03 index 1 mmio: [0xfaf00000-0xfbffffff] [ 0.870600] bus: 03 index 2 mmio: [0xe0000000-0xf9ffffff] [ 0.870604] bus: 03 index 3 mmio: [0x0-0x0] [ 0.870609] bus: 04 index 0 mmio: [0x0-0x0] [ 0.870612] bus: 04 index 1 mmio: [0x0-0x0] [ 0.870616] bus: 04 index 2 mmio: [0x0-0x0] [ 0.870620] bus: 04 index 3 mmio: [0x0-0x0] [ 0.870624] bus: 05 index 0 mmio: [0x0-0x0] [ 0.870629] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff] [ 0.870633] bus: 05 index 2 mmio: [0x0-0x0] [ 0.870637] bus: 05 index 3 mmio: [0x0-0x0] [ 0.870641] bus: 06 index 0 mmio: [0x0-0x0] [ 0.870645] bus: 06 index 1 mmio: [0x0-0x0] [ 0.870648] bus: 06 index 2 mmio: [0x0-0x0] [ 0.870652] bus: 06 index 3 mmio: [0x0-0x0] [ 0.870656] bus: 07 index 0 mmio: [0x0-0x0] [ 0.870660] bus: 07 index 1 mmio: [0x0-0x0] [ 0.870664] bus: 07 index 2 mmio: [0x0-0x0] [ 0.870668] bus: 07 index 3 mmio: [0x0-0x0] [ 0.870689] NET: Registered protocol family 2 [ 0.884131] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.884664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.885452] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.885873] TCP: Hash tables configured (established 131072 bind 65536) [ 0.885879] TCP reno registered [ 0.892205] NET: Registered protocol family 1 [ 0.892417] checking if image is initramfs... it is [ 1.914907] Freeing initrd memory: 7633k freed [ 1.915286] cpufreq: No nForce2 chipset. [ 1.915548] audit: initializing netlink socket (disabled) [ 1.915583] type=2000 audit(1252402300.912:1): initialized [ 1.929891] highmem bounce pool size: 64 pages [ 1.929907] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.932669] VFS: Disk quotas dquot_6.5.1 [ 1.932793] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.934107] fuse init (API version 7.10) [ 1.934282] msgmni has been set to 1704 [ 1.934630] alg: No test for stdrng (krng) [ 1.934663] io scheduler noop registered [ 1.934668] io scheduler anticipatory registered [ 1.934672] io scheduler deadline registered [ 1.934710] io scheduler cfq registered (default) [ 1.957862] pci 0000:03:00.0: Boot video device [ 1.979857] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.980041] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.980142] pcieport-driver 0000:00:0c.0: irq 2303 for MSI/MSI-X [ 1.980184] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.980409] pcieport-driver 0000:00:15.0: setting latency timer to 64 [ 1.980594] pcieport-driver 0000:00:15.0: found MSI capability [ 1.980696] pcieport-driver 0000:00:15.0: irq 2302 for MSI/MSI-X [ 1.980739] pci_express 0000:00:15.0:pcie00: allocate port service [ 1.980938] pcieport-driver 0000:00:16.0: setting latency timer to 64 [ 1.981107] pcieport-driver 0000:00:16.0: found MSI capability [ 1.981201] pcieport-driver 0000:00:16.0: irq 2301 for MSI/MSI-X [ 1.981242] pci_express 0000:00:16.0:pcie00: allocate port service [ 1.981448] pcieport-driver 0000:00:17.0: setting latency timer to 64 [ 1.981616] pcieport-driver 0000:00:17.0: found MSI capability [ 1.981710] pcieport-driver 0000:00:17.0: irq 2300 for MSI/MSI-X [ 1.981750] pci_express 0000:00:17.0:pcie00: allocate port service [ 1.981948] pcieport-driver 0000:00:18.0: setting latency timer to 64 [ 1.982122] pcieport-driver 0000:00:18.0: found MSI capability [ 1.982220] pcieport-driver 0000:00:18.0: irq 2299 for MSI/MSI-X [ 1.982261] pci_express 0000:00:18.0:pcie00: allocate port service [ 1.982458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.982478] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.982742] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.982748] ACPI: Power Button (FF) [PWRF] [ 1.982848] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.982854] ACPI: Power Button (CM) [PWRB] [ 1.984150] processor ACPI_CPU:00: registered as cooling_device0 [ 1.984159] ACPI: Processor [P001] (supports 8 throttling states) [ 1.984834] processor ACPI_CPU:01: registered as cooling_device1 [ 1.984842] ACPI: Processor [P002] (supports 8 throttling states) [ 1.997536] isapnp: Scanning for PnP cards... [ 2.350563] isapnp: No Plug & Play device found [ 2.361106] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.362974] brd: module loaded [ 2.363654] loop: module loaded [ 2.363803] Fixed MDIO Bus: probed [ 2.363816] PPP generic driver version 2.4.2 [ 2.363939] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.364002] Driver 'sd' needs updating - please use bus_type methods [ 2.364032] Driver 'sr' needs updating - please use bus_type methods [ 2.364125] ahci 0000:00:0b.0: version 3.0 [ 2.365106] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 2.365115] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 2.365205] ahci 0000:00:0b.0: irq 2298 for MSI/MSI-X [ 2.365317] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.365324] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part [ 2.365331] ahci 0000:00:0b.0: setting latency timer to 64 [ 2.366199] scsi0 : ahci [ 2.366442] scsi1 : ahci [ 2.366566] scsi2 : ahci [ 2.366707] scsi3 : ahci [ 2.366852] scsi4 : ahci [ 2.367000] scsi5 : ahci [ 2.367262] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 2298 [ 2.367269] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 2298 [ 2.367275] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 2298 [ 2.367281] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 2298 [ 2.367286] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 2298 [ 2.367292] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 2298 [ 2.684023] ata1: SATA link down (SStatus 0 SControl 300) [ 3.168023] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.168888] ata2.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133 [ 3.168894] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.170010] ata2.00: configured for UDMA/133 [ 3.488022] ata3: SATA link down (SStatus 0 SControl 300) [ 3.808022] ata4: SATA link down (SStatus 0 SControl 300) [ 4.128022] ata5: SATA link down (SStatus 0 SControl 300) [ 4.448022] ata6: SATA link down (SStatus 0 SControl 300) [ 4.448233] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 [ 4.448441] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4.448484] sd 1:0:0:0: [sda] Write Protect is off [ 4.448490] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.448582] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.448730] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) [ 4.448770] sd 1:0:0:0: [sda] Write Protect is off [ 4.448776] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.448845] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.448854] sda: sda1 sda2 sda3 [ 4.473744] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.473841] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.475304] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.476349] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 4.476358] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 4.476393] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 4.476399] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 4.476532] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 4.476579] ehci_hcd 0000:00:04.1: debug port 1 [ 4.476587] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 4.476614] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfae7ec00 [ 4.488019] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 4.488162] usb usb1: configuration #1 chosen from 1 choice [ 4.488228] hub 1-0:1.0: USB hub found [ 4.488244] hub 1-0:1.0: 12 ports detected [ 4.488477] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.489440] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 4.489449] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 4.489478] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 4.489484] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 4.489584] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 4.489620] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfae7f000 [ 4.546125] usb usb2: configuration #1 chosen from 1 choice [ 4.546182] hub 2-0:1.0: USB hub found [ 4.546200] hub 2-0:1.0: 12 ports detected [ 4.546391] uhci_hcd: USB Universal Host Controller Interface driver [ 4.546554] PNP: No PS/2 controller found. Probing ports directly. [ 4.548042] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.548057] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.552092] mice: PS/2 mouse device common for all mice [ 4.564129] rtc_cmos 00:06: RTC can wake from S4 [ 4.564196] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 4.564255] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 4.564396] device-mapper: uevent: version 1.0.3 [ 4.564600] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 4.564769] device-mapper: multipath: version 1.0.5 loaded [ 4.564777] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.564962] EISA: Probing bus 0 at eisa.0 [ 4.564982] Cannot allocate resource for EISA slot 4 [ 4.565001] EISA: Detected 0 cards. [ 4.565102] cpuidle: using governor ladder [ 4.565108] cpuidle: using governor menu [ 4.566212] TCP cubic registered [ 4.566437] NET: Registered protocol family 10 [ 4.567293] lo: Disabled Privacy Extensions [ 4.567941] NET: Registered protocol family 17 [ 4.567980] Bluetooth: L2CAP ver 2.11 [ 4.567984] Bluetooth: L2CAP socket layer initialized [ 4.567990] Bluetooth: SCO (Voice Link) ver 0.6 [ 4.567993] Bluetooth: SCO socket layer initialized [ 4.568095] Bluetooth: RFCOMM socket layer initialized [ 4.568112] Bluetooth: RFCOMM TTY layer initialized [ 4.568117] Bluetooth: RFCOMM ver 1.10 [ 4.568224] Using IPI No-Shortcut mode [ 4.568393] registered taskstats version 1 [ 4.568660] Magic number: 9:50:525 [ 4.568801] rtc_cmos 00:06: setting system clock to 2009-09-08 09:31:44 UTC (1252402304) [ 4.568810] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.568815] EDD information not available. [ 4.569199] Freeing unused kernel memory: 532k freed [ 4.569482] Write protecting the kernel text: 4116k [ 4.569580] Write protecting the kernel read-only data: 1528k [ 4.856549] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 5.014170] usb 1-2: configuration #1 chosen from 1 choice [ 5.153908] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.155062] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 [ 5.155073] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23 [ 5.155084] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 5.156829] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:22:68:65:0d:a7 [ 5.156838] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 5.372589] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 5.613201] usb 2-1: configuration #1 chosen from 1 choice [ 5.668796] Initializing USB Mass Storage driver... [ 5.677432] usbcore: registered new interface driver hiddev [ 5.677687] scsi6 : SCSI emulation for USB Mass Storage devices [ 5.677852] usb-storage: device found at 3 [ 5.677859] usb-storage: waiting for device to settle before scanning [ 5.677895] usbcore: registered new interface driver usb-storage [ 5.677902] USB Mass Storage support registered. [ 5.683757] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3 [ 5.688716] generic-usb 0003:046D:C058.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:04.0-1/input0 [ 5.688768] usbcore: registered new interface driver usbhid [ 5.688778] usbhid: v2.6:USB HID core driver [ 5.920046] usb 2-3: new low speed USB device using ohci_hcd and address 3 [ 6.152124] usb 2-3: configuration #1 chosen from 1 choice [ 6.167480] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.0/input/input4 [ 6.172194] generic-usb 0003:04F2:0402.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:04.0-3/input0 [ 6.199126] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb2/2-3/2-3:1.1/input/input5 [ 6.208771] generic-usb 0003:04F2:0402.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:04.0-3/input1 [ 6.221332] kjournald starting. Commit interval 5 seconds [ 6.221360] EXT3-fs: mounted filesystem with ordered data mode. [ 10.676792] usb-storage: device scan complete [ 10.678639] scsi 6:0:0:0: Direct-Access WD 10EAVS External 1.75 PQ: 0 ANSI: 4 [ 10.680365] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 10.681496] sd 6:0:0:0: [sdb] Write Protect is off [ 10.681525] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 10.681530] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 10.682232] sd 6:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) [ 10.683499] sd 6:0:0:0: [sdb] Write Protect is off [ 10.683507] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 10.683512] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 10.683523] sdb: sdb1 [ 10.693375] sd 6:0:0:0: [sdb] Attached SCSI disk [ 10.693490] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 12.657882] udev: starting version 141 [ 13.799492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.932619] cfg80211: Calling CRDA to update world regulatory domain [ 13.983373] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 14.011874] acer-wmi: Acer Laptop ACPI-WMI Extras [ 14.011907] acer-wmi: No or unsupported WMI interface, unable to load [ 14.090742] cfg80211: World regulatory domain updated: [ 14.090750] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.090757] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.090762] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.090768] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.090773] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.090778] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.201571] Linux agpgart interface v0.103 [ 14.537350] nvidia: module license 'NVIDIA' taints kernel. [ 14.571640] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19 [ 14.571659] ath5k_pci 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19 [ 14.571677] ath5k_pci 0000:05:00.0: setting latency timer to 64 [ 14.572091] ath5k_pci 0000:05:00.0: registered as 'phy0' [ 14.622707] phy0: Selected rate control algorithm 'pid' [ 14.778358] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 14.803325] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22 [ 14.803337] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 22 (level, low) -> IRQ 22 [ 14.803354] nvidia 0000:03:00.0: setting latency timer to 64 [ 14.804414] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 14.873845] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 14.875047] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 14.875060] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 14.875143] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 15.930459] lp: driver loaded but no devices found [ 16.689389] EXT3 FS on loop0, internal journal [ 24.489704] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k [ 24.918825] type=1505 audit(1252395124.847:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2080 [ 24.919098] type=1505 audit(1252395124.847:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2080 [ 24.919210] type=1505 audit(1252395124.847:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2080 [ 24.919312] type=1505 audit(1252395124.847:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2080 [ 25.234301] type=1505 audit(1252395125.163:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2085 [ 25.234705] type=1505 audit(1252395125.163:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2085 [ 25.315009] type=1505 audit(1252395125.243:8): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2089 [ 25.376639] type=1505 audit(1252395125.307:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2093 [ 33.425840] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 33.425848] Bluetooth: BNEP filters: protocol multicast [ 33.469307] Bridge firewalling registered [ 34.306180] ppdev: user-space parallel port driver [ 38.074563] eth0: no link during initialization. [ 38.075385] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.136589] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 51.665080] CPU0 attaching NULL sched-domain. [ 51.665090] CPU1 attaching NULL sched-domain. [ 51.668793] CPU0 attaching sched-domain: [ 51.668799] domain 0: span 0-1 level SIBLING [ 51.668805] groups: 0 1 [ 51.668816] CPU1 attaching sched-domain: [ 51.668820] domain 0: span 0-1 level SIBLING [ 51.668825] groups: 1 0 [ 102.181144] wlan0: authenticate with AP 00:24:fe:08:4d:64 [ 102.182985] wlan0: authenticated [ 102.183000] wlan0: associate with AP 00:24:fe:08:4d:64 [ 102.188748] wlan0: RX AssocResp from 00:24:fe:08:4d:64 (capab=0x411 status=0 aid=2) [ 102.188757] wlan0: associated [ 102.189426] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 104.331270] padlock: VIA PadLock not detected. [ 112.432022] wlan0: no IPv6 routers present [ 135.017419] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 2088.957320] ath5k phy0: noise floor calibration timeout (2427MHz) [ 2091.028736] ath5k phy0: noise floor calibration timeout (2427MHz) [51953.816049] usb 1-6: new high speed USB device using ehci_hcd and address 5 [51953.956130] usb 1-6: configuration #1 chosen from 1 choice [51955.180807] Linux video capture interface: v2.00 [51955.344844] em28xx v4l2 driver version 0.0.1 loaded [51955.347686] em28xx: new video device (0ccd:0072): interface 0, class 255 [51955.347695] em28xx: device is attached to a USB 2.0 bus [51955.347705] em28xx #0: Alternate settings: 8 [51955.347711] em28xx #0: Alternate setting 0, max size= 0 [51955.347716] em28xx #0: Alternate setting 1, max size= 0 [51955.347722] em28xx #0: Alternate setting 2, max size= 1448 [51955.347728] em28xx #0: Alternate setting 3, max size= 2048 [51955.347734] em28xx #0: Alternate setting 4, max size= 2304 [51955.347740] em28xx #0: Alternate setting 5, max size= 2580 [51955.347746] em28xx #0: Alternate setting 6, max size= 2892 [51955.347753] em28xx #0: Alternate setting 7, max size= 3072 [51955.593554] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.595108] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.596223] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [51955.598362] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [51955.598809] cx25843.c: detecting cx25843 client on address 0x88 [51955.598869] attach_inform: msp34xx/cx25843 detected. [51957.269715] trying to attach xc5000 [51957.332296] attaching xc5000 tuner module [51958.880132] successfully attached tuner [51958.880283] radio device registered as /dev/radio0 [51958.884721] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [51958.892754] em28xx #0: V4L2 device registered as /dev/video0 [51958.892890] input: em2880/em2870 remote control as /devices/virtual/input/input7 [51958.902286] em28xx-input.c: remote control handler attached [51958.902293] em28xx #0: Found Terratec Hybrid XS FM (em2883) [51958.902333] usbcore: registered new interface driver em28xx [51959.091167] em28xx-audio.c: probing for em28x1 non standard usbaudio [51959.091176] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [51959.096227] Em28xx: Initialized (Em28xx Audio Extension) extension [51960.609271] opening radio device and trying to acquire exclusive lock [51960.609283] em28xx-audio: device is currently in analogue FM mode [51960.609290] device is locked in fmradio mode now [51960.613502] changing alternate number to 7 [52163.769216] usb 1-6: USB disconnect, address 5 [52163.787160] em28xx-input.c: remote control handler detached [52163.787170] audio: deinitializing audio device [52163.787175] audio: before waitstream [52163.787178] audio: after waitstream [52163.787182] audio: waiting for audioclients to release audio node [52163.787684] em28xx #0: disconnecting em28xx#0 video [52163.787692] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered [52163.787790] em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered [52163.787954] cx25843.c: removing cx25843 adapter on address 0x88 [52259.416575] usb 1-6: new high speed USB device using ehci_hcd and address 6 [52259.556826] usb 1-6: configuration #1 chosen from 1 choice [52259.557359] em28xx: new video device (0ccd:0072): interface 0, class 255 [52259.557367] em28xx: device is attached to a USB 2.0 bus [52259.557378] em28xx #0: Alternate settings: 8 [52259.557384] em28xx #0: Alternate setting 0, max size= 0 [52259.557390] em28xx #0: Alternate setting 1, max size= 0 [52259.557397] em28xx #0: Alternate setting 2, max size= 1448 [52259.557403] em28xx #0: Alternate setting 3, max size= 2048 [52259.557410] em28xx #0: Alternate setting 4, max size= 2304 [52259.557415] em28xx #0: Alternate setting 5, max size= 2580 [52259.557422] em28xx #0: Alternate setting 6, max size= 2892 [52259.557428] em28xx #0: Alternate setting 7, max size= 3072 [52259.853963] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [52259.854473] cx25843.c: detecting cx25843 client on address 0x88 [52259.854521] attach_inform: msp34xx/cx25843 detected. [52261.503932] trying to attach xc5000 [52261.504155] attaching xc5000 tuner module [52263.096972] successfully attached tuner [52263.097100] radio device registered as /dev/radio0 [52263.102602] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [52263.110726] em28xx #0: V4L2 device registered as /dev/video0 [52263.110737] em28xx-audio.c: probing for em28x1 non standard usbaudio [52263.110744] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [52263.111581] em2880-dvb.c: DVB Init [52263.689581] FIXME:em28xx_i2c_send_bytes(1e): write failed: [52263.689591] =============================== [52263.689597] 7f [52263.689602] ================================ [52263.689952] zl10353_read_register: readreg error (reg=127, ret==-19) [52263.776567] FIXME:em28xx_i2c_send_bytes(1e): write failed: [52263.776577] =============================== [52263.776583] 7f [52263.776588] ================================ [52263.776944] mt352_read_register: readreg error (reg=127, ret==-19) [52263.777219] em2880-dvb.c: failed initializing zl10353DVB-T demodulator [52263.777227] em2880-dvb.c: retrying with mt352 DVB-Tdemodulator [52263.777233] em2880-dvb.c: no luck with mt352demodulator, not attaching em2880-dvb [52263.778104] input: em2880/em2870 remote control as /devices/virtual/input/input8 [52263.815887] em28xx-input.c: remote control handler attached [52263.815897] em28xx #0: Found Terratec Hybrid XS FM (em2883) [52264.000239] opening radio device and trying to acquire exclusive lock [52264.000252] switching device to FM mode [52265.747838] retrieved mode from tuner: 1 [52265.748730] changing alternate number to 7 Könntest du mal deine dmesg Ausgaben entsprechend posten?
Heinrich_Schwietering Wikiteam Anmeldungsdatum: 12. November 2005 Beiträge: 11288	Zitieren 9. September 2009 07:44 Hi! Die relevanten Passagen sind (und die sollten eigentlich für die benötigten Infos ausreichen): Beim Booten mit angestecktem Stick [ 12.963083] em28xx v4l2 driver version 0.0.1 loaded [ 12.965173] em28xx: new video device (0ccd:0092): interface 0, class 255 [ 12.965178] em28xx: device is attached to a USB 2.0 bus [ 12.965186] em28xx #0: Alternate settings: 8 [ 12.965189] em28xx #0: Alternate setting 0, max size= 0 [ 12.965191] em28xx #0: Alternate setting 1, max size= 0 [ 12.965194] em28xx #0: Alternate setting 2, max size= 1448 [ 12.965196] em28xx #0: Alternate setting 3, max size= 2048 [ 12.965198] em28xx #0: Alternate setting 4, max size= 2304 [ 12.965201] em28xx #0: Alternate setting 5, max size= 2580 [ 12.965203] em28xx #0: Alternate setting 6, max size= 2892 [ 12.965205] em28xx #0: Alternate setting 7, max size= 3072 [ 14.878942] trying to attach xc5000 [ 14.917963] attaching xc5000 tuner module ... [ 16.393801] successfully attached tuner [ 16.394004] radio device registered as /dev/radio0 [ 16.399455] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 16.405430] em28xx #0: V4L2 device registered as /dev/video0 [ 16.405631] input: em2880/em2870 remote control as /devices/virtual/input/input6 [ 16.421297] em28xx-input.c: remote control handler attached [ 16.421302] em28xx #0: Found Terratec Hybrid XS FM (em2883) [ 16.421338] usbcore: registered new interface driver em28xx [ 16.470208] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 16.470213] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 16.470552] Em28xx: Initialized (Em28xx Audio Extension) extension [ 16.514156] em2880-dvb.c: DVB Init [ 16.827925] DVB: registering new adapter (em2880 DVB-T) [ 16.827934] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 16.828537] Em28xx: Initialized (Em2880 DVB Extension) extension ... [ 56.403644] opening radio device and trying to acquire exclusive lock [ 56.403652] em28xx-audio: device is currently in analogue FM mode [ 56.403655] device is locked in fmradio mode now [ 56.407874] changing alternate number to 7 Dabei hab' ich festgestellt, dass ich doch die neuere Variante (0092 statt 0072) verwende; sollte aber keinen Unterschied machen. Im verlinkten post ging es um 0072, und da lief das Teil, vielleicht solltest du bei keeroo noch mal nachfragen... Abziehen: [ 1287.189846] em28xx-input.c: remote control handler detached [ 1287.189852] audio: deinitializing audio device [ 1287.189854] audio: before waitstream [ 1287.189856] audio: after waitstream [ 1287.189858] audio: waiting for audioclients to release audio node [ 1287.190328] em28xx #0: disconnecting em28xx#0 video [ 1287.190331] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered [ 1287.190370] em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered [ 1287.190438] cx25843.c: removing cx25843 adapter on address 0x88 am Ende kommt dazu. Neu Anstecken im laufenden Betrieb: [ 1350.372018] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 1350.538254] usb 1-2: configuration #1 chosen from 1 choice [ 1350.538414] em28xx: new video device (0ccd:0092): interface 0, class 255 [ 1350.538417] em28xx: device is attached to a USB 2.0 bus [ 1350.538421] em28xx #0: Alternate settings: 8 [ 1350.538424] em28xx #0: Alternate setting 0, max size= 0 [ 1350.538426] em28xx #0: Alternate setting 1, max size= 0 [ 1350.538428] em28xx #0: Alternate setting 2, max size= 1448 [ 1350.538431] em28xx #0: Alternate setting 3, max size= 2048 [ 1350.538433] em28xx #0: Alternate setting 4, max size= 2304 [ 1350.538435] em28xx #0: Alternate setting 5, max size= 2580 [ 1350.538438] em28xx #0: Alternate setting 6, max size= 2892 [ 1350.538440] em28xx #0: Alternate setting 7, max size= 3072 [ 1350.901617] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [ 1350.902072] cx25843.c: detecting cx25843 client on address 0x88 [ 1350.902117] attach_inform: msp34xx/cx25843 detected. [ 1352.402932] trying to attach xc5000 [ 1352.403106] attaching xc5000 tuner module [ 1353.931783] successfully attached tuner [ 1353.934604] radio device registered as /dev/radio0 [ 1353.938649] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 1353.944719] em28xx #0: V4L2 device registered as /dev/video0 [ 1353.944725] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 1353.944728] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 1353.945099] em2880-dvb.c: DVB Init [ 1354.624787] DVB: registering new adapter (em2880 DVB-T) [ 1354.624798] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 1354.627471] input: em2880/em2870 remote control as /devices/virtual/input/input7 [ 1354.675399] em28xx-input.c: remote control handler attached [ 1354.675404] em28xx #0: Found Terratec Hybrid XS FM (em2883) [ 1354.728065] opening radio device and trying to acquire exclusive lock [ 1354.728073] switching device to FM mode [ 1357.126881] retrieved mode from tuner: 1 [ 1357.129292] changing alternate number to 7 und die Karte funktioniert... Jetzt keine Fehler, allerdings hatte ich zwischenzeitlich mal eine ähnliche Fehlermeldung wie bei dir. Ich weiß allerdings noch, dass ich beim ersten Installationsversuch die Methode mit dem fertigen Paket verwendet hatte (ohne Erfolg), und dazu auch das cleanEM28xx.sh-Skript verwendet hatte. Das Paket hab' ich wieder entfernt; vielleicht hatte das Skript trotzdem einen Einfluss auf die Funktionalität? Neuen Kernel-Headers oder -Images musste ich nicht installieren, allerdings musste ich den Rechner nach der ersten Installation von em28xx-new ganz neu starten, damit die Module tatsächlich geladen wurden. Funktioniert denn die Karte nach dem Starten mit angestecktem Stick? Die Meldungen sehen imho ganz in Ordnung aus. so long hank
elvito (Themenstarter) Anmeldungsdatum: 17. März 2006 Beiträge: 32	Zitieren 12. September 2009 10:17 Hab das System jetzt mal neu aufgesetzt. Hab danach den em28xx-new Weg aus dem Wiki probiert. Die Fehlermeldung ist die gleiche. Analog geht der Stick DVB geht nicht, weder wenn ich den Stick beim booten dran hab noch wenn ich ihn erst nach dem Booten anstecke. Fehlermeldungen siehe erstes Post. Ich möchte nochmal betonen das der Stick ein einziges mal funktioniert hat (DVB-T) ich aber leider nicht mehr weiß was ich in welcher Reihenfolge mit welchem Kernel gemacht habe. Falls irgendjemand ein vernünftiges Howto bieten könnte hätte er meine ewige Dankbarkeit sicher!!! Solange das nicht geht werd ich den Stick wohl oder übel unter M$ nutzen müssen ☹
Heinrich_Schwietering Wikiteam Anmeldungsdatum: 12. November 2005 Beiträge: 11288	Zitieren 12. September 2009 10:57 (zuletzt bearbeitet: 25. September 2009 17:08) Hi! Hm, letzte "Hoffnung": Versuch es mit der em28xx-new-Methode und dem CleanEm28xx.sh-skript. Hast du keeroo mal angemailt? Bei dem läuft "dein" Stick, identische USB-ID. so long hank
elvito (Themenstarter) Anmeldungsdatum: 17. März 2006 Beiträge: 32	Zitieren 25. September 2009 13:53 Cleanscript hat nichts gebracht. Ich hab keeroo angemailt und ihn gebeten hier im Thread zu antworten falls er ne Idee hat. Auf jeden Fall danke für deine Mühe.
eishailiga Anmeldungsdatum: 31. Oktober 2006 Beiträge: 5401	Zitieren 25. September 2009 15:25 Versuche es doch mal mit dieser Firmware... wget http://www.steventoth.net/linux/hvr1500/xc3028-v27.fw sudo cp xc3028-v27.fw /lib/firmware/
Heinrich_Schwietering Wikiteam Anmeldungsdatum: 12. November 2005 Beiträge: 11288	Zitieren 25. September 2009 17:05 Hi! eishailiga schrieb: Versuche es doch mal mit dieser Firmware... wget http://www.steventoth.net/linux/hvr1500/xc3028-v27.fw sudo cp xc3028-v27.fw /lib/firmware/ Da versuchst du ihn wohl im Kreis zu schicken: siehe hier... so long hank
eishailiga Anmeldungsdatum: 31. Oktober 2006 Beiträge: 5401	Zitieren 25. September 2009 18:28 (zuletzt bearbeitet: 25. September 2009 18:32) Warum ? Die Firmware ist nicht identisch mit der aus dem wiki...habe sie mit compare verglichen...
Heinrich_Schwietering Wikiteam Anmeldungsdatum: 12. November 2005 Beiträge: 11288	Zitieren 25. September 2009 22:19 Hi! steventoth hat mehrerer Versionen im Angebot? Naja, dann ist es ja einen Versuch wert... so long hank
keeroo Anmeldungsdatum: 28. August 2009 Beiträge: Zähle...	Zitieren 26. September 2009 12:37 (zuletzt bearbeitet: 26. September 2009 12:46) Hallo, Bei mir läuft der Stick tatsächlich mit DVB-T. Meine dmesg Ausgabe ist hier: http://paste.ubuntu.com/278648/ Viel mehr Hinweise kann ich auch nicht geben als ich schon in http://forum.ubuntuusers.de/topic/neuer-artikel:-cinergy-t-usb-hybrid-xs-et-alt/4/#post-2124486 gegeben habe. Gerade nach Installationsversuchen mit den v4l- und firmware-Sachen hat bei mir nachher überhaupt nichts mehr funktioniert. Des wegen halt die Neuinstallation der kernel-sourcen und des -images. Danach dann den mrec-Treiber installieren mit ./build build, ./build install und ./build load. Neustarten falls das ./build load nicht klappt, hilft auch manchmal. Bei mir wird unter kaffeine das DVB-T device danach erkannt. keeroo Edit: Nach Vergleich der dmesg-Ausgaben, ist mir das folgende aufgefallen. Ich bekomme [ 286.088733] em2880-dvb.c: DVB Init [ 286.393794] DVB: registering new adapter (em2880 DVB-T) [ 286.393800] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 286.394098] input: em2880/em2870 remote control as /devices/virtual/input/input7 während du an der Stelle [52263.111581] em2880-dvb.c: DVB Init [52263.689581] FIXME:em28xx_i2c_send_bytes(1e): write failed: [52263.689591] =============================== [52263.689597] 7f [52263.689602] ================================ [52263.689952] zl10353_read_register: readreg error (reg=127, ret==-19) [52263.776567] FIXME:em28xx_i2c_send_bytes(1e): write failed: [52263.776577] =============================== [52263.776583] 7f [52263.776588] ================================ [52263.776944] mt352_read_register: readreg error (reg=127, ret==-19) [52263.777219] em2880-dvb.c: failed initializing zl10353DVB-T demodulator [52263.777227] em2880-dvb.c: retrying with mt352 DVB-Tdemodulator [52263.777233] em2880-dvb.c: no luck with mt352demodulator, not attaching em2880-dvb [52263.778104] input: em2880/em2870 remote control as /devices/virtual/input/input8 bekommst. Der Rest ist identisch...
elvito (Themenstarter) Anmeldungsdatum: 17. März 2006 Beiträge: 32	Zitieren 28. September 2009 10:29 (zuletzt bearbeitet: 28. September 2009 11:22) eishailiga schrieb: Warum ? Die Firmware ist nicht identisch mit der aus dem wiki...habe sie mit compare verglichen... Hat leider nichts gebracht... @ kerroo: Genau diese Ausgabe in dmesg hatte ich auch ein einziges mal –> DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... Ich brauche genau diese Zeile! Unter kaffeine hatte er mir dann auch das Zarlink device angezeigt als es ging. Ich hab ja oben angedeutet, daß ich den Rechner inzwischen auch einmal neu aufgesetzt hatte und nur die em28xx-new Methode angewendet hatte (eben mit dem mrec Treiber). Ich war mir so sicher das es funktioniert. Beim ersten mal hatte ich das Ding damit nach 15 min am laufen. Dann reboot und seitdem nur noch Frust auf meiner Seite ☹ Falls euch nochwas einfällt... Ich hatte noch extra vor dem Kauf geschaut ob der Stick unter Linux läuft und jetzt hat mrec leider die Entwicklung eingestellt. Terratec hat auf eine Anfrage bzgl Linuxsupport nicht mal geantwortet... Ganz toll! Ich werde jetzt mal die em28xx-cards.c patchen wie in meinem ersten Post beschrieben, den Treiber neu kompilieren und schauen ob es dann geht. Ich halte euch auf dem laufenden. gruß edit: ICH FASSE ES NICHT!!!! Der Stick funzt tatsächlich mit dem patch!!! DVB läuft juhuuu! Jetzt muss das ganze nur noch den Reboot überstehen und danach immer noch laufen. Ich werde dann hier berichten. edit2: Es geht tatsächlich auch nach dem Reboot noch. Fantastisch. Da war die Lösung die ganze Zeit vor meinen Augen. Also nochmal zusammenfassend für alle anderen die vor dem gleichen Problem stehen wie ich: Hi, problem solved after a short IRC discussion with Markus Rechberger. There seems to be something corrupted in the EEPROM of my device, if I switch to a static gpio map instead of asking the gpio registers via EEPROM, my device works again. Simple patch: diff -r 6664052db595 em28xx-cards.c --- a/em28xx-cards.c Fri Nov 21 09:18:59 2008 +0100 +++ b/em28xx-cards.c Wed Nov 26 19:43:34 2008 +0100 @@ -1584,6 +1584,8 @@ .ir_keytab = ir_codes_em_terratec2, .ir_getkey = em2880_get_key_terratec, .dev_modes = EM28XX_VIDEO \| EM28XX_VBI \| EM28XX_DVBT \| EM28XX_AUDIO \| EM28XX_RADIO, + .manual_gpio = 1, + .gpio_regs = EETI_DEFAULT_GPIO, .input = {{ .type = EM28XX_VMUX_TELEVISION, .vmux = CX25843_TELEVISION, Thanks Markus! bye Waldemar Das hier lieferte den entscheidenden Hinweis (Siehe mein erstes Post). Einfach die Datei em28xx-cards.c mit dem Editor eurer Wahl öffnen, dann Zeile 1584 aufsuchen und diese zwei Zeilen ergänzen: .manual_gpio = 1, .gpio_regs = EETI_DEFAULT_GPIO, danach die Treiber wie im em28xx-new Wikieintrag kompilieren installieren und laden und ggf. den Rechner neustarten. Sollte der Stick nicht gleich funzen evtl nochmal abziehen und neu einstecken. Es ist keine Firmware notwendig. Danke nochmal an alle für eure Hilfe. Ihr solltet das evtl. in das Wiki mitaufnehmen. gruß elvito p.s. hier noch ein Beweisbild –> http://img23.imageshack.us/img23/9748/beweisfoto.png
keeroo Anmeldungsdatum: 28. August 2009 Beiträge: 5	Zitieren 28. September 2009 11:41 elvito schrieb: edit: ICH FASSE ES NICHT!!!! Der Stick funzt tatsächlich mit dem patch!!! DVB läuft juhuuu! Jetzt muss das ganze nur noch den Reboot überstehen und danach immer noch laufen. Ich werde dann hier berichten. Was fuer eine dmesg-Ausgabe bekommst du denn? Und wieso funktioniert der mrec-Treiber bei dir nur mit Patch? Hast du eine andere Version von dem Stick? keeroo
elvito (Themenstarter) Anmeldungsdatum: 17. März 2006 Beiträge: 32	Zitieren 28. September 2009 11:47 dmesg (gekürzt) nach Anwendung des Patch...: [ 95.304028] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 95.443839] usb 1-6: configuration #1 chosen from 1 choice [ 95.554271] Linux video capture interface: v2.00 [ 95.614645] em28xx v4l2 driver version 0.0.1 loaded [ 95.615078] em28xx: new video device (0ccd:0072): interface 0, class 255 [ 95.615084] em28xx: device is attached to a USB 2.0 bus [ 95.615091] em28xx #0: Alternate settings: 8 [ 95.615096] em28xx #0: Alternate setting 0, max size= 0 [ 95.615100] em28xx #0: Alternate setting 1, max size= 0 [ 95.615104] em28xx #0: Alternate setting 2, max size= 1448 [ 95.615109] em28xx #0: Alternate setting 3, max size= 2048 [ 95.615113] em28xx #0: Alternate setting 4, max size= 2304 [ 95.615118] em28xx #0: Alternate setting 5, max size= 2580 [ 95.615122] em28xx #0: Alternate setting 6, max size= 2892 [ 95.615127] em28xx #0: Alternate setting 7, max size= 3072 [ 95.854146] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 95.855635] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 95.856079] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 95.858377] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [ 95.858718] trying to attach xc5000 [ 95.895916] attaching xc5000 tuner module [ 97.367877] successfully attached tuner [ 97.368020] radio device registered as /dev/radio0 [ 97.374097] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 97.374383] em28xx #0: V4L2 device registered as /dev/video0 [ 97.374543] input: em2880/em2870 remote control as /devices/virtual/input/input7 [ 97.408183] em28xx-input.c: remote control handler attached [ 97.408193] em28xx #0: Found Terratec Hybrid XS FM (em2883) [ 97.408247] usbcore: registered new interface driver em28xx [ 97.474274] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 97.474283] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 97.475064] Em28xx: Initialized (Em28xx Audio Extension) extension [ 98.204796] opening radio device and trying to acquire exclusive lock [ 98.204807] em28xx-audio: device is currently in analog TV mode [ 98.206635] changing alternate number to 7 [ 147.375905] usb 1-6: USB disconnect, address 5 [ 147.386641] em28xx-input.c: remote control handler detached [ 147.386651] audio: deinitializing audio device [ 147.386656] audio: before waitstream [ 147.386661] audio: after waitstream [ 147.386665] audio: waiting for audioclients to release audio node [ 147.387157] em28xx #0: disconnecting em28xx#0 video [ 147.387165] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered [ 147.387249] em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered [ 167.884029] usb 1-6: new high speed USB device using ehci_hcd and address 6 [ 168.024560] usb 1-6: configuration #1 chosen from 1 choice [ 168.024759] em28xx: new video device (0ccd:0072): interface 0, class 255 [ 168.024766] em28xx: device is attached to a USB 2.0 bus [ 168.024774] em28xx #0: Alternate settings: 8 [ 168.024780] em28xx #0: Alternate setting 0, max size= 0 [ 168.024785] em28xx #0: Alternate setting 1, max size= 0 [ 168.024791] em28xx #0: Alternate setting 2, max size= 1448 [ 168.024796] em28xx #0: Alternate setting 3, max size= 2048 [ 168.024802] em28xx #0: Alternate setting 4, max size= 2304 [ 168.024808] em28xx #0: Alternate setting 5, max size= 2580 [ 168.024813] em28xx #0: Alternate setting 6, max size= 2892 [ 168.024819] em28xx #0: Alternate setting 7, max size= 3072 [ 168.264365] cx25843.c: starting probe for adapter em28xx #0 (0x1001f) [ 168.264893] trying to attach xc5000 [ 168.265089] attaching xc5000 tuner module [ 169.749153] successfully attached tuner [ 169.749278] radio device registered as /dev/radio0 [ 169.753570] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 169.753783] em28xx #0: V4L2 device registered as /dev/video0 [ 169.753790] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 169.753796] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 169.754636] em2880-dvb.c: DVB Init [ 170.116061] DVB: registering new adapter (em2880 DVB-T) [ 170.116075] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 170.116960] input: em2880/em2870 remote control as /devices/virtual/input/input8 [ 170.154607] em28xx-input.c: remote control handler attached [ 170.154618] em28xx #0: Found Terratec Hybrid XS FM (em2883) [ 170.555140] opening radio device and trying to acquire exclusive lock [ 170.555152] switching device to FM mode [ 170.699321] retrieved mode from tuner: 1 [ 170.703088] changing alternate number to 7 [ 181.632109] em28xx_dvb_init [ 181.736026] initializing: 18 [ 753.360113] em28xx_dvb_init [ 753.468024] initializing: 18 lsusb: Bus 001 Device 006: ID 0ccd:0072 TerraTec Electronic GmbH Bus 001 Device 003: ID 1058:1003 Western Digital Technologies, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 04f2:0402 Chicony Electronics Co., Ltd Bus 002 Device 002: ID 046d:c058 Logitech, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Ich habe ehrlich gesagt keine Ahnung warum es einmal auch ohne den Patch gefunzt hat. Der Stick ist der gleiche würde ich sagen.

« Vorherige12 Nächste »

Antworten |

« Vorheriges Thema Nächstes Thema »