Der Analoge Teil ist auch der Wichtigere, ich schau ja über Kabel fernsehn bzw ich nehm über das Kabelfernsehn die Programme auf 😉 Das passt so schon
Muss ich ihm nur beibringen zu Funktionieren 😀
Cinergy Hybrid T USB XS - Linuxtauglich?
|
Anmeldungsdatum: Beiträge: 40 |
|
|
Wikiteam
Anmeldungsdatum: Beiträge: 11288 |
Hi! AmonNascaroth schrieb:
Wenn du analogen Empfang möchtest, solltest du was anderes als Kaffeine nehmen; das gibts z.B. die Seite Analog-TV,die dir da weiterhelfen könnte. so long |
Anmeldungsdatum: Beiträge: 5401 |
AmonNascaroth schrieb:
Für doch trotzdem mal die Anleitung aus... |
|
Anmeldungsdatum: Beiträge: 40 |
blackdevil@blackdevil-laptop:/usr/src$ tar xzf linux-source-*.tar.bz2 gzip: stdin: not in gzip format tar: Child returned status 1 tar: Fehler beim Beenden, verursacht durch vorhergehende Fehler. blackdevil@blackdevil-laptop:/usr/src$ Hm ... bis dahin ging die Anleitung, die ich übrigens erst übersah, reibungslos |
|
Anmeldungsdatum: Beiträge: 5401 |
Sorry... sudo tar xvjf linux-source-*.tar.bz2 |
|
Anmeldungsdatum: Beiträge: 40 |
blackdevil@blackdevil-laptop:/$ cd em28xx-new bash: cd: em28xx-new: No such file or directory blackdevil@blackdevil-laptop:/$ 😀 |
|
Anmeldungsdatum: Beiträge: 5401 |
Hattest du den Treiber wohl schon entsorgt... 😀 dann lade ihn neu... hg clone http://mcentral.de/hg/~mrec/em28xx-new |
|
Anmeldungsdatum: Beiträge: 40 |
[ 1.204913] bus: 02 index 3 mmio: [0, 0] [ 1.204918] bus: 03 index 0 mmio: [0, 0] [ 1.204924] bus: 03 index 1 mmio: [0, 0] [ 1.204929] bus: 03 index 2 mmio: [0, 0] [ 1.204934] bus: 03 index 3 mmio: [0, 0] [ 1.204939] bus: 04 index 0 mmio: [0, 0] [ 1.204944] bus: 04 index 1 mmio: [0, 0] [ 1.204950] bus: 04 index 2 mmio: [0, 0] [ 1.204955] bus: 04 index 3 mmio: [0, 0] [ 1.204960] bus: 05 index 0 mmio: [0, 0] [ 1.204966] bus: 05 index 1 mmio: [d0000000, d00fffff] [ 1.204971] bus: 05 index 2 mmio: [0, 0] [ 1.204977] bus: 05 index 3 mmio: [0, 0] [ 1.204983] bus: 06 index 0 io port: [2000, 2fff] [ 1.204989] bus: 06 index 1 mmio: [d0100000, d01fffff] [ 1.204995] bus: 06 index 2 mmio: [88000000, 8bffffff] [ 1.205001] bus: 06 index 3 io port: [0, ffff] [ 1.205007] bus: 06 index 4 mmio: [0, ffffffff] [ 1.205013] bus: 07 index 0 io port: [2000, 20ff] [ 1.205019] bus: 07 index 1 io port: [2400, 24ff] [ 1.205025] bus: 07 index 2 mmio: [88000000, 8bffffff] [ 1.205031] bus: 07 index 3 mmio: [8c000000, 8fffffff] [ 1.205052] NET: Registered protocol family 2 [ 1.220127] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.220680] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.221605] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.222066] TCP: Hash tables configured (established 131072 bind 65536) [ 1.222074] TCP reno registered [ 1.228187] NET: Registered protocol family 1 [ 1.228447] checking if image is initramfs... it is [ 2.965661] Freeing initrd memory: 7931k freed [ 2.966244] Simple Boot Flag at 0x36 set to 0x1 [ 2.968314] audit: initializing netlink socket (disabled) [ 2.968354] type=2000 audit(1225632750.964:1): initialized [ 2.983916] highmem bounce pool size: 64 pages [ 2.983932] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.990388] VFS: Disk quotas dquot_6.5.1 [ 2.990615] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.990869] msgmni has been set to 1743 [ 2.991175] io scheduler noop registered [ 2.991182] io scheduler anticipatory registered [ 2.991189] io scheduler deadline registered [ 2.991220] io scheduler cfq registered (default) [ 2.991247] pci 0000:00:02.0: Boot video device [ 2.991691] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.991765] pcieport-driver 0000:00:1c.0: found MSI capability [ 2.991839] pci_express 0000:00:1c.0:pcie00: allocate port service [ 2.991957] pci_express 0000:00:1c.0:pcie02: allocate port service [ 2.992071] pci_express 0000:00:1c.0:pcie03: allocate port service [ 2.992290] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 2.992361] pcieport-driver 0000:00:1c.1: found MSI capability [ 2.992431] pci_express 0000:00:1c.1:pcie00: allocate port service [ 2.992542] pci_express 0000:00:1c.1:pcie02: allocate port service [ 2.992656] pci_express 0000:00:1c.1:pcie03: allocate port service [ 2.992867] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 2.992937] pcieport-driver 0000:00:1c.2: found MSI capability [ 2.993018] pci_express 0000:00:1c.2:pcie00: allocate port service [ 2.993132] pci_express 0000:00:1c.2:pcie02: allocate port service [ 2.993245] pci_express 0000:00:1c.2:pcie03: allocate port service [ 2.993458] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 2.993529] pcieport-driver 0000:00:1c.3: found MSI capability [ 2.993598] pci_express 0000:00:1c.3:pcie00: allocate port service [ 2.993714] pci_express 0000:00:1c.3:pcie02: allocate port service [ 2.993825] pci_express 0000:00:1c.3:pcie03: allocate port service [ 2.994692] isapnp: Scanning for PnP cards... [ 3.349271] isapnp: No Plug & Play device found [ 3.444372] hpet_resources: 0xfed00000 is busy [ 3.444551] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 3.450423] brd: module loaded [ 3.450611] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 3.450920] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 3.451477] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.451579] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.451593] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.451601] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.451608] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.451615] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.456338] mice: PS/2 mouse device common for all mice [ 3.456701] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 3.456744] rtc0: alarms up to one month, y3k, hpet irqs [ 3.457109] EISA: Probing bus 0 at eisa.0 [ 3.457122] Cannot allocate resource for EISA slot 1 [ 3.457129] Cannot allocate resource for EISA slot 2 [ 3.457161] Cannot allocate resource for EISA slot 5 [ 3.457186] EISA: Detected 0 cards. [ 3.457192] cpuidle: using governor ladder [ 3.457199] cpuidle: using governor menu [ 3.458508] TCP cubic registered [ 3.458565] Using IPI No-Shortcut mode [ 3.459220] registered taskstats version 1 [ 3.459253] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.459499] Magic number: 0:37:533 [ 3.459511] bdi 1:11: hash matches [ 3.459700] rtc_cmos 00:07: setting system clock to 2008-11-02 13:32:33 UTC (1225632753) [ 3.459709] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.459715] EDD information not available. [ 3.460137] Freeing unused kernel memory: 424k freed [ 3.460256] Write protecting the kernel text: 2576k [ 3.460328] Write protecting the kernel read-only data: 936k [ 3.776577] fuse init (API version 7.9) [ 3.905122] ACPI: SSDT 7F685F02, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 3.906192] ACPI: SSDT 7F6859BB, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 3.920460] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.920606] processor ACPI0007:00: registered as cooling_device0 [ 3.920617] ACPI: Processor [CPU0] (supports 8 throttling states) [ 3.921445] ACPI: SSDT 7F68613A, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 3.922435] ACPI: SSDT 7F685E7D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) [ 3.932021] Marking TSC unstable due to TSC halts in idle [ 3.976480] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 3.976618] processor ACPI0007:01: registered as cooling_device1 [ 3.976630] ACPI: Processor [CPU1] (supports 8 throttling states) [ 3.988434] thermal LNXTHERM:01: registered as thermal_zone0 [ 3.998355] ACPI: Thermal Zone [TZ00] (52 C) [ 4.003490] thermal LNXTHERM:02: registered as thermal_zone1 [ 4.012879] ACPI: Thermal Zone [TZ01] (52 C) [ 4.875889] usbcore: registered new interface driver usbfs [ 4.876173] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.876192] b43-pci-bridge 0000:05:00.0: setting latency timer to 64 [ 4.876236] usbcore: registered new interface driver hub [ 4.876330] usbcore: registered new device driver usb [ 4.881975] USB Universal Host Controller Interface driver v3.0 [ 4.940199] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 4.940297] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.940315] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.940324] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 4.940414] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 4.940471] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 4.940776] usb usb1: configuration #1 chosen from 1 choice [ 4.940848] hub 1-0:1.0: USB hub found [ 4.940864] hub 1-0:1.0: 2 ports detected [ 5.042487] No dock devices found. [ 5.081344] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.081364] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.081373] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.081434] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 5.081494] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0 [ 5.081750] usb usb2: configuration #1 chosen from 1 choice [ 5.081820] hub 2-0:1.0: USB hub found [ 5.081838] hub 2-0:1.0: 2 ports detected [ 5.094437] SCSI subsystem initialized [ 5.162228] libata version 3.00 loaded. [ 5.188521] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.188542] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.188551] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.188611] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 5.188670] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0 [ 5.188898] usb usb3: configuration #1 chosen from 1 choice [ 5.188967] hub 3-0:1.0: USB hub found [ 5.188984] hub 3-0:1.0: 2 ports detected [ 5.396524] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 5.396544] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.396553] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.396618] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 5.396676] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400 [ 5.396922] usb usb4: configuration #1 chosen from 1 choice [ 5.396993] hub 4-0:1.0: USB hub found [ 5.397012] hub 4-0:1.0: 2 ports detected [ 5.512061] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 5.609078] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.609108] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.609117] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.609183] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 5.613121] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.613135] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.613153] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 [ 5.640067] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.640577] usb usb5: configuration #1 chosen from 1 choice [ 5.640659] hub 5-0:1.0: USB hub found [ 5.640678] hub 5-0:1.0: 8 ports detected [ 5.848651] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 5.848671] b44 0000:06:01.0: setting latency timer to 64 [ 5.912192] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 5.912825] b44.c:v2.0 [ 5.921809] ata_piix 0000:00:1f.2: version 2.12 [ 5.921838] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.921849] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 5.932867] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1b:38:1e:e9:73 [ 6.040090] usb 3-1: device not accepting address 2, error -71 [ 6.076140] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 6.076408] scsi0 : ata_piix [ 6.077177] scsi1 : ata_piix [ 6.079890] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 [ 6.079899] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 [ 6.096137] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 6.242117] ata1.00: ATA-7: ST9160821AS, 3.ALD, max UDMA/133 [ 6.242126] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.256936] ata1.00: configured for UDMA/133 [ 6.336099] usb 5-5: new high speed USB device using ehci_hcd and address 2 [ 6.420629] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33 [ 6.436564] ata2.00: configured for UDMA/33 [ 6.436797] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5 [ 6.440345] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5 [ 6.470522] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.470621] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.485354] usb 5-5: configuration #1 chosen from 1 choice [ 6.504030] Clocksource tsc unstable (delta = -271176832 ns) [ 6.519909] Driver 'sd' needs updating - please use bus_type methods [ 6.520153] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.520203] sd 0:0:0:0: [sda] Write Protect is off [ 6.520210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.520290] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.520455] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.520501] sd 0:0:0:0: [sda] Write Protect is off [ 6.520508] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.520590] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.520602] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 6.668648] sda1 sda2 < sda5 > [ 6.708778] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.731044] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.731055] Uniform CD-ROM driver Revision: 3.20 [ 6.731256] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.848109] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 7.024536] usb 4-1: configuration #1 chosen from 1 choice [ 7.068915] PM: Starting manual resume from disk [ 7.068924] PM: Resume from partition 8:5 [ 7.068929] PM: Checking hibernation image. [ 7.070323] PM: Resume from disk failed. [ 7.088169] usbcore: registered new interface driver hiddev [ 7.104050] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2 [ 7.127084] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1 [ 7.127133] usbcore: registered new interface driver usbhid [ 7.127142] usbhid: v2.6:USB HID core driver [ 7.168138] kjournald starting. Commit interval 5 seconds [ 7.168168] EXT3-fs: mounted filesystem with ordered data mode. [ 10.335238] udevd version 124 started [ 14.926476] ACPI: WMI: Mapper loaded [ 15.004342] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 15.097992] acer-wmi: Acer Laptop ACPI-WMI Extras [ 15.129179] Registered led device: acer-wmi::mail [ 15.202641] iTCO_vendor_support: vendor-support=0 [ 15.257413] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 15.257582] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 15.257763] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 15.818710] intel_rng: FWH not detected [ 15.944649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 16.056729] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.425225] Linux agpgart interface v0.103 [ 16.516699] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 16.517386] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 16.543577] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 16.958255] Yenta: CardBus bridge found at 0000:06:04.0 [1025:0090] [ 16.958294] Yenta: Using CSCINT to route CSC interrupts to PCI [ 16.958300] Yenta: Routing CardBus interrupts to PCI [ 16.958311] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44 [ 17.054473] sdhci: Secure Digital Host Controller Interface driver [ 17.054481] sdhci: Copyright(c) Pierre Ossman [ 17.116893] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 17.169801] ACPI: Power Button (FF) [PWRF] [ 17.170007] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 17.189894] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 17.189903] Socket status: 30000006 [ 17.189910] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 17.189924] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 17.189932] cs: IO port probe 0x2000-0x2fff: clean. [ 17.190457] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff [ 17.190464] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 17.200424] ACPI: Lid Switch [LID] [ 17.200632] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6 [ 17.256312] ACPI: Sleep Button (CM) [SLPB] [ 17.256504] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7 [ 17.264022] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) [ 17.264047] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) [ 17.264063] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 17.264211] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO [ 17.264234] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) [ 17.264256] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) [ 17.264268] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 17.264348] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO [ 17.300306] ACPI: Power Button (CM) [PWRB] [ 17.600138] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 [ 17.630728] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 18.028986] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input9 [ 18.076377] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 18.076991] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input10 [ 18.112235] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.131469] ACPI: AC Adapter [ACAD] (on-line) [ 18.780319] ACPI: Battery Slot [BAT1] (battery present) [ 19.143773] ieee80211_crypt: registered algorithm 'NULL' [ 19.148614] wl: module license 'MIXED/Proprietary' taints kernel. [ 19.874017] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.874072] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 20.351283] Linux video capture interface: v2.00 [ 20.500760] em28xx v4l2 driver version 0.1.0 loaded [ 20.501379] em28xx new video device (0ccd:005e): interface 0, class 255 [ 20.501391] em28xx Doesn't have usb audio class [ 20.501396] em28xx #0: Alternate settings: 8 [ 20.501402] em28xx #0: Alternate setting 0, max size= 0 [ 20.501408] em28xx #0: Alternate setting 1, max size= 0 [ 20.501415] em28xx #0: Alternate setting 2, max size= 1448 [ 20.501421] em28xx #0: Alternate setting 3, max size= 2048 [ 20.501427] em28xx #0: Alternate setting 4, max size= 2304 [ 20.501433] em28xx #0: Alternate setting 5, max size= 2580 [ 20.501439] em28xx #0: Alternate setting 6, max size= 2892 [ 20.501446] em28xx #0: Alternate setting 7, max size= 3072 [ 20.501756] em28xx #0: chip ID is em2882/em2883 [ 20.726002] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c [ 20.726035] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 [ 20.726063] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 [ 20.726092] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 [ 20.726120] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.726149] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.726177] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 [ 20.726205] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 [ 20.726233] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 [ 20.726261] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 [ 20.726290] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 [ 20.726318] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 [ 20.726346] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 [ 20.726374] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 [ 20.726403] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 30 00 30 00 [ 20.726431] em28xx #0: i2c eeprom f0: 31 00 35 00 30 00 33 00 00 00 00 00 00 00 00 00 [ 20.726462] EEPROM ID= 0x9567eb1a, hash = 0x3b13b3be [ 20.726468] Vendor/Product ID= 0ccd:005e [ 20.726473] AC97 audio (5 sample rates) [ 20.726477] 500mA max power [ 20.726483] Table at 0x27, strings=0x409e, 0x1cde, 0x346a [ 20.726489] em28xx #0: [ 20.726491] [ 20.726497] em28xx #0: The support for this board weren't valid yet. [ 20.726504] em28xx #0: Please send a report of having this working [ 20.726510] em28xx #0: not to V4L mailing list (and/or to other addresses) [ 20.726514] [ 20.781447] b43-phy0: Broadcom 4311 WLAN found [ 20.805688] cs: IO port probe 0x100-0x3af: clean. [ 20.808222] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 20.809264] cs: IO port probe 0x820-0x8ff: clean. [ 20.810127] cs: IO port probe 0xc00-0xcf7: clean. [ 20.811344] cs: IO port probe 0xa00-0xaff: clean. [ 20.859814] phy0: Selected rate control algorithm 'pid' [ 20.945498] tuner' 0-0061: chip found @ 0xc2 (em28xx #0) [ 21.064295] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 21.096072] xc2028 0-0061: creating new instance [ 21.096081] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 21.096100] firmware: requesting xc3028-v27.fw [ 21.172397] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 21.240084] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 21.692379] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700. [ 21.697623] SCODE (20000000), id 000000000000b700: [ 21.697633] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 21.728746] xc2028 0-0061: i2c input error: rc = -19 (should be 2) [ 21.728755] xc2028 0-0061: Unable to read tuner registers. [ 21.852067] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 22.288356] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700. [ 22.293602] SCODE (20000000), id 000000000000b700: [ 22.293611] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 22.324725] xc2028 0-0061: i2c input error: rc = -19 (should be 2) [ 22.324733] xc2028 0-0061: Unable to read tuner registers. [ 22.520469] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 22.536469] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 22.552468] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 22.568467] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 22.568475] tvp5150 0-005c: *** unknown tvp8081 chip detected. [ 22.568482] tvp5150 0-005c: *** Rom ver is 130.131 [ 22.624466] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 22.644465] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 22.664467] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 22.693339] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [ 22.693346] em28xx #0: Found Terratec Hybrid XS (em2882) [ 22.693424] usbcore: registered new interface driver em28xx [ 22.785002] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 22.785016] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 22.785903] Em28xx: Initialized (Em28xx Audio Extension) extension [ 23.409350] lp: driver loaded but no devices found [ 23.611968] Em28xx: Initialized (Em28xx dvb Extension) extension [ 23.973069] Adding 6048432k swap on /dev/sda5. Priority:-1 extents:1 across:6048432k [ 24.579343] EXT3 FS on sda1, internal journal [ 26.044990] type=1505 audit(1225632780.017:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4558 [ 26.500634] type=1505 audit(1225632780.473:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4563 [ 26.501057] type=1505 audit(1225632780.473:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4563 [ 26.649431] type=1505 audit(1225632780.621:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4567 [ 26.866205] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.517529] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 31.755697] apm: BIOS not found. [ 31.974324] ppdev: user-space parallel port driver [ 35.173179] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 35.173197] vboxdrv: Successfully done. [ 35.173202] vboxdrv: Found 2 processor cores. [ 35.179396] vboxdrv: fAsync=0 offMin=0x521 offMax=0x1cff [ 35.179423] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 35.179430] vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000). [ 36.916634] tvp5150 0-005c: tvp5150am1 detected. [ 40.206602] Bluetooth: Core ver 2.13 [ 40.208944] NET: Registered protocol family 31 [ 40.208957] Bluetooth: HCI device and connection manager initialized [ 40.208965] Bluetooth: HCI socket layer initialized [ 40.294700] Bluetooth: L2CAP ver 2.11 [ 40.294714] Bluetooth: L2CAP socket layer initialized [ 40.324162] Bluetooth: RFCOMM socket layer initialized [ 40.325838] Bluetooth: RFCOMM TTY layer initialized [ 40.325852] Bluetooth: RFCOMM ver 1.10 [ 40.349228] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 40.349243] Bluetooth: BNEP filters: protocol multicast [ 40.437885] Bridge firewalling registered [ 40.441511] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 40.465600] Bluetooth: SCO (Voice Link) ver 0.6 [ 40.465617] Bluetooth: SCO socket layer initialized [ 43.504113] ACPI: EC: missing confirmations, switch off interrupt mode. [ 44.025041] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609] [ 44.025066] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.ACAD._PSR] (Node f7419ee8), AE_TIME [ 44.025131] ACPI Exception (ac-0136): AE_TIME, Error reading AC Adapter state [20080609] [ 44.623609] input: b43-phy0 as /devices/virtual/input/input11 [ 44.737000] [drm] Initialized drm 1.1.0 20060810 [ 44.737071] firmware: requesting b43/ucode5.fw [ 44.745133] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 44.745147] pci 0000:00:02.0: setting latency timer to 64 [ 44.745711] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 44.772343] firmware: requesting b43/pcm5.fw [ 44.799752] firmware: requesting b43/b0g0initvals5.fw [ 44.840255] firmware: requesting b43/b0g0bsinitvals5.fw [ 44.985644] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 44.985672] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008. [ 44.985690] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4). [ 45.149844] Registered led device: b43-phy0::tx [ 45.149882] Registered led device: b43-phy0::rx [ 45.149910] Registered led device: b43-phy0::radio [ 45.278308] NET: Registered protocol family 17 [ 45.964038] wlan0: authenticate with AP 00:1e:2a:22:01:b2 [ 45.973789] wlan0: authenticated [ 45.973801] wlan0: associate with AP 00:1e:2a:22:01:b2 [ 45.975865] wlan0: RX AssocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1) [ 45.975873] wlan0: associated [ 45.976848] wlan0: disassociating by local choice (reason=3) [ 96.105207] wlan0: authenticate with AP 00:1e:2a:22:01:b2 [ 96.107159] wlan0: authenticate with AP 00:1e:2a:22:01:b2 [ 96.107612] wlan0: authenticated [ 96.107620] wlan0: associate with AP 00:1e:2a:22:01:b2 [ 96.120135] wlan0: RX ReassocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1) [ 96.120151] wlan0: associated [ 98.361813] CPU0 attaching NULL sched-domain. [ 98.361838] CPU1 attaching NULL sched-domain. [ 98.363167] CPU0 attaching sched-domain: [ 98.363181] domain 0: span 0-1 level MC [ 98.363188] groups: 0 1 [ 98.363202] CPU1 attaching sched-domain: [ 98.363208] domain 0: span 0-1 level MC [ 98.363214] groups: 1 0 |
|
Anmeldungsdatum: Beiträge: 5401 |
Da passt was noch nicht...entferne mal den Kernel... Kernel entfernen sudo apt-get remove linux-headers-`uname -r` linux-image-`uname -r` linux-restricted-modules-`uname -r` Verzeichnis löschen sudo rm -R /lib/modules/`uname -r` Kernel installieren sudo apt-get install linux-headers-`uname -r` linux-image-`uname -r` linux-restricted-modules-`uname -r` Firmware für den Stick installieren cd /lib/firmware sudo wget http://konstantin.filtschew.de/v4l-firmware/firmware_v3.tgz sudo tar xzf firmware_v3.tgz sudo reboot |
|
Anmeldungsdatum: Beiträge: 40 |
blackdevil@blackdevil-laptop:~$ sudo apt-get remove linux-headers-`uname -r` linux-image-`uname -r` linux-restricted-modules-`uname -r` linux-ubuntu-modules-`uname -r` [sudo] password for blackdevil: Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut Lese Status-Informationen ein... Fertig E: Konnte Paket linux-ubuntu-modules-2.6.27-7-generic nicht finden blackdevil@blackdevil-laptop:~$ |
|
Anmeldungsdatum: Beiträge: 5401 |
Ich lese gerade, daß ab dem Kernel 2.6.27 das "linux-ubuntu-modules-2.6.27-7-generic" in das Modul "linux-image-2.6.27" integriert wurde...ist also in Ordnung... |
|
Anmeldungsdatum: Beiträge: 40 |
Das bedeutet nun? *g* |
|
Anmeldungsdatum: Beiträge: 5401 |
Habe obige Anleitung angepasst..einfach ausführen... |
Anmeldungsdatum: Beiträge: 19 |
Hi, ich Versuche nach dem Update mein USB Stick (eb1a:2881 / Pinnacle Hybrid) zum laufen zu bringen. Hat mit den Vorschlägen hier auch gut funktioniert. Nun steh ich eben vor dem selben Problem (siehe Code). Ich hab auch schon den Kernel neu installiert und die Firmware auch. Funktioniert aber nicht. Für mich ist der analoge Empfang wichtig 😉 Danke johannnson running ./build.sh build make[1]: Betrete Verzeichnis '/home/johannes/em28xx-new' rm -rf Module.symvers; make -C /lib/modules/`if [ -d /lib/modules/2.6.21.4-eeepc ]; then echo 2.6.21.4-eeepc; else uname -r; fi`/build SUBDIRS=`pwd` modules make[2]: Betrete Verzeichnis '/usr/src/linux-headers-2.6.27-7-generic' CC [M] /home/johannes/em28xx-new/em2880-dvb.o In file included from /home/johannes/em28xx-new/em2880-dvb.c:33: /home/johannes/em28xx-new/em28xx.h:32:20: error: dmxdev.h: No such file or directory /home/johannes/em28xx-new/em28xx.h:33:23: error: dvb_demux.h: No such file or directory /home/johannes/em28xx-new/em28xx.h:34:21: error: dvb_net.h: No such file or directory /home/johannes/em28xx-new/em28xx.h:35:26: error: dvb_frontend.h: No such file or directory In file included from /home/johannes/em28xx-new/em2880-dvb.c:33: /home/johannes/em28xx-new/em28xx.h:553: Fehler: Feld »demux« hat unvollständigen Typen /home/johannes/em28xx-new/em28xx.h:561: Fehler: Feld »adapter« hat unvollständigen Typen /home/johannes/em28xx-new/em28xx.h:564: Fehler: Feld »dmxdev« hat unvollständigen Typen /home/johannes/em28xx-new/em28xx.h:566: Fehler: Feld »dvbnet« hat unvollständigen Typen In file included from /home/johannes/em28xx-new/em2880-dvb.c:40: /home/johannes/em28xx-new/mt352/mt352.h: In Funktion »mt352_write«: /home/johannes/em28xx-new/mt352/mt352.h:68: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/mt352/mt352.h:69: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen In file included from /home/johannes/em28xx-new/em2880-dvb.c:42: /home/johannes/em28xx-new/drx3973d/drx3973d_demod.h: Auf höchster Ebene: /home/johannes/em28xx-new/drx3973d/drx3973d_demod.h:9: Fehler: Feld »frontend« hat unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:48:22: error: lgdt330x.h: No such file or directory /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em2880_complete_irq«: /home/johannes/em28xx-new/em2880-dvb.c:256: Fehler: Implizite Deklaration der Funktion »dvb_dmx_swfilter« /home/johannes/em28xx-new/em2880-dvb.c: Auf höchster Ebene: /home/johannes/em28xx-new/em2880-dvb.c:365: Warnung: »struct dvb_demux_feed« innerhalb Parameterliste deklariert /home/johannes/em28xx-new/em2880-dvb.c:365: Warnung: sein Gültigkeitsbereich umfasst nur diese Definition bzw. Deklaration, was Sie wahrscheinlich nicht wollten /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em2880_start_feed«: /home/johannes/em28xx-new/em2880-dvb.c:367: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:368: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: Auf höchster Ebene: /home/johannes/em28xx-new/em2880-dvb.c:382: Warnung: »struct dvb_demux_feed« innerhalb Parameterliste deklariert /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em2880_stop_feed«: /home/johannes/em28xx-new/em2880-dvb.c:384: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:385: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_ts_bus_ctrl«: /home/johannes/em28xx-new/em2880-dvb.c:411: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »mt352_pinnacle_init«: /home/johannes/em28xx-new/em2880-dvb.c:462: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: Auf höchster Ebene: /home/johannes/em28xx-new/em2880-dvb.c:488: Fehler: Variable »em2880_lgdt3303_dev« hat Initialisierung, aber unvollständigen Typ /home/johannes/em28xx-new/em2880-dvb.c:489: Fehler: unbekanntes Feld »demod_address« in Initialisierung angegeben /home/johannes/em28xx-new/em2880-dvb.c:489: Warnung: Elementüberschreitung in struct-Initialisierung /home/johannes/em28xx-new/em2880-dvb.c:489: Warnung: (nahe der Initialisierung für »em2880_lgdt3303_dev«) /home/johannes/em28xx-new/em2880-dvb.c:490: Fehler: unbekanntes Feld »demod_chip« in Initialisierung angegeben /home/johannes/em28xx-new/em2880-dvb.c:490: Fehler: »LGDT3303« ist hier nicht deklariert (nicht in einer Funktion) /home/johannes/em28xx-new/em2880-dvb.c:491: Warnung: Elementüberschreitung in struct-Initialisierung /home/johannes/em28xx-new/em2880-dvb.c:491: Warnung: (nahe der Initialisierung für »em2880_lgdt3303_dev«) /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »kworld355u_i2c_gate_ctrl«: /home/johannes/em28xx-new/em2880-dvb.c:505: Fehler: Feld »frontend« hat unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:511: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_set_params«: /home/johannes/em28xx-new/em2880-dvb.c:525: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:534: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_get_frequency«: /home/johannes/em28xx-new/em2880-dvb.c:652: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_get_bandwidth«: /home/johannes/em28xx-new/em2880-dvb.c:659: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_dvb_init«: /home/johannes/em28xx-new/em2880-dvb.c:667: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_s921_init«: /home/johannes/em28xx-new/em2880-dvb.c:723: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_zl10353_init«: /home/johannes/em28xx-new/em2880-dvb.c:740: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_zl10353_sleep«: /home/johannes/em28xx-new/em2880-dvb.c:785: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em28xx_dvb_sleep«: /home/johannes/em28xx-new/em2880-dvb.c:797: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em2880_dvb_init«: /home/johannes/em28xx-new/em2880-dvb.c:866: Fehler: Implizite Deklaration der Funktion »dvb_attach« /home/johannes/em28xx-new/em2880-dvb.c:870: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:889: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:892: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:897: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:903: Fehler: »lgdt330x_attach« nicht deklariert (erste Benutzung in dieser Funktion) /home/johannes/em28xx-new/em2880-dvb.c:903: Fehler: (Jeder nicht deklarierte Bezeichner wird nur einmal aufgeführt /home/johannes/em28xx-new/em2880-dvb.c:903: Fehler: für jede Funktion in der er auftritt.) /home/johannes/em28xx-new/em2880-dvb.c:904: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:913: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:918: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:924: Warnung: Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /home/johannes/em28xx-new/em2880-dvb.c:927: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:928: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:929: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:950: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:951: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:953: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:955: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:959: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:961: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:970: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:984: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:986: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:987: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:1005: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c:1008: Fehler: Implizite Deklaration der Funktion »dvb_register_adapter« /home/johannes/em28xx-new/em2880-dvb.c:1026: Fehler: Implizite Deklaration der Funktion »dvb_register_frontend« /home/johannes/em28xx-new/em2880-dvb.c:1033: Fehler: »DMX_TS_FILTERING« nicht deklariert (erste Benutzung in dieser Funktion) /home/johannes/em28xx-new/em2880-dvb.c:1034: Fehler: »DMX_SECTION_FILTERING« nicht deklariert (erste Benutzung in dieser Funktion) /home/johannes/em28xx-new/em2880-dvb.c:1035: Fehler: »DMX_MEMORY_BASED_FILTERING« nicht deklariert (erste Benutzung in dieser Funktion) /home/johannes/em28xx-new/em2880-dvb.c:1037: Fehler: Implizite Deklaration der Funktion »dvb_dmx_init« /home/johannes/em28xx-new/em2880-dvb.c:1048: Fehler: Implizite Deklaration der Funktion »dvb_dmxdev_init« /home/johannes/em28xx-new/em2880-dvb.c:1052: Fehler: Implizite Deklaration der Funktion »dvb_dmxdev_release« /home/johannes/em28xx-new/em2880-dvb.c:1063: Fehler: Implizite Deklaration der Funktion »dvb_net_init« /home/johannes/em28xx-new/em2880-dvb.c:1063: Fehler: Dereferenzierung eines Zeigers auf unvollständigen Typen /home/johannes/em28xx-new/em2880-dvb.c: In Funktion »em2880_dvb_fini«: /home/johannes/em28xx-new/em2880-dvb.c:1083: Fehler: Implizite Deklaration der Funktion »dvb_net_release« /home/johannes/em28xx-new/em2880-dvb.c:1084: Fehler: Implizite Deklaration der Funktion »dvb_unregister_frontend« /home/johannes/em28xx-new/em2880-dvb.c:1085: Fehler: Implizite Deklaration der Funktion »dvb_frontend_detach« /home/johannes/em28xx-new/em2880-dvb.c:1089: Fehler: Implizite Deklaration der Funktion »dvb_dmx_release« /home/johannes/em28xx-new/em2880-dvb.c:1091: Fehler: Implizite Deklaration der Funktion »dvb_unregister_adapter« make[3]: *** [/home/johannes/em28xx-new/em2880-dvb.o] Fehler 1 make[2]: *** [_module_/home/johannes/em28xx-new] Fehler 2 make[2]: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.27-7-generic' make[1]: *** [default] Fehler 2 make[1]: Verlasse Verzeichnis '/home/johannes/em28xx-new' cp: Aufruf von stat für „sharp/s921.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „drx3973d/drx3973d.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „tvp5150/tvp5150.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „lgdt3304/lgdt3304.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „mt352/mt352.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „zl10353/zl10353.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „cx25843/em28xx-cx25843.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „xc3028/tuner-xc3028.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „xc5000/tuner-xc5000.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „em28xx.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „em28xx-audio.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „em28xx-aad.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „em28xx-audioep.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „em28xx-dvb.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „qt1010/qt1010.ko“ nicht möglich: No such file or directory cp: Aufruf von stat für „mt2060/mt2060.ko“ nicht möglich: No such file or directory johannes@johannes-laptop:~/em28xx-new$ |
|
Anmeldungsdatum: Beiträge: 40 |
So ich wieder, war zwischenzeitlich im Sport. Mal schauen ob ich das ganze irgendwann wieder rekapitulieren kann ... 😀 [ 1.208847] pci 0000:00:1c.3: setting latency timer to 64 [ 1.208859] pci 0000:00:1e.0: enabling device (0004 -> 0007) [ 1.208871] pci 0000:00:1e.0: setting latency timer to 64 [ 1.208889] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.208901] bus: 00 index 0 io port: [0, ffff] [ 1.208907] bus: 00 index 1 mmio: [0, ffffffff] [ 1.208913] bus: 02 index 0 mmio: [0, fff] [ 1.208919] bus: 02 index 1 mmio: [0, fffff] [ 1.208924] bus: 02 index 2 mmio: [0, 0] [ 1.208930] bus: 02 index 3 mmio: [0, 0] [ 1.208935] bus: 03 index 0 mmio: [0, 0] [ 1.208940] bus: 03 index 1 mmio: [0, 0] [ 1.208945] bus: 03 index 2 mmio: [0, 0] [ 1.208951] bus: 03 index 3 mmio: [0, 0] [ 1.208956] bus: 04 index 0 mmio: [0, 0] [ 1.208961] bus: 04 index 1 mmio: [0, 0] [ 1.208966] bus: 04 index 2 mmio: [0, 0] [ 1.208971] bus: 04 index 3 mmio: [0, 0] [ 1.208977] bus: 05 index 0 mmio: [0, 0] [ 1.208982] bus: 05 index 1 mmio: [d0000000, d00fffff] [ 1.208988] bus: 05 index 2 mmio: [0, 0] [ 1.208993] bus: 05 index 3 mmio: [0, 0] [ 1.208999] bus: 06 index 0 io port: [2000, 2fff] [ 1.209005] bus: 06 index 1 mmio: [d0100000, d01fffff] [ 1.209011] bus: 06 index 2 mmio: [88000000, 8bffffff] [ 1.209018] bus: 06 index 3 io port: [0, ffff] [ 1.209023] bus: 06 index 4 mmio: [0, ffffffff] [ 1.209029] bus: 07 index 0 io port: [2000, 20ff] [ 1.209035] bus: 07 index 1 io port: [2400, 24ff] [ 1.209041] bus: 07 index 2 mmio: [88000000, 8bffffff] [ 1.209047] bus: 07 index 3 mmio: [8c000000, 8fffffff] [ 1.209069] NET: Registered protocol family 2 [ 1.224124] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.224680] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.225605] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.226075] TCP: Hash tables configured (established 131072 bind 65536) [ 1.226084] TCP reno registered [ 1.232185] NET: Registered protocol family 1 [ 1.232443] checking if image is initramfs... it is [ 2.969217] Freeing initrd memory: 7931k freed [ 2.969803] Simple Boot Flag at 0x36 set to 0x1 [ 2.971870] audit: initializing netlink socket (disabled) [ 2.971910] type=2000 audit(1225645206.969:1): initialized [ 2.987470] highmem bounce pool size: 64 pages [ 2.987485] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.993952] VFS: Disk quotas dquot_6.5.1 [ 2.994176] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.994434] msgmni has been set to 1743 [ 2.994740] io scheduler noop registered [ 2.994747] io scheduler anticipatory registered [ 2.994753] io scheduler deadline registered [ 2.994785] io scheduler cfq registered (default) [ 2.994812] pci 0000:00:02.0: Boot video device [ 2.995249] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.995322] pcieport-driver 0000:00:1c.0: found MSI capability [ 2.995396] pci_express 0000:00:1c.0:pcie00: allocate port service [ 2.995511] pci_express 0000:00:1c.0:pcie02: allocate port service [ 2.995624] pci_express 0000:00:1c.0:pcie03: allocate port service [ 2.995843] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 2.995913] pcieport-driver 0000:00:1c.1: found MSI capability [ 2.995983] pci_express 0000:00:1c.1:pcie00: allocate port service [ 2.996096] pci_express 0000:00:1c.1:pcie02: allocate port service [ 2.996211] pci_express 0000:00:1c.1:pcie03: allocate port service [ 2.996424] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 2.996494] pcieport-driver 0000:00:1c.2: found MSI capability [ 2.996564] pci_express 0000:00:1c.2:pcie00: allocate port service [ 2.996679] pci_express 0000:00:1c.2:pcie02: allocate port service [ 2.996792] pci_express 0000:00:1c.2:pcie03: allocate port service [ 2.997014] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 2.997084] pcieport-driver 0000:00:1c.3: found MSI capability [ 2.997154] pci_express 0000:00:1c.3:pcie00: allocate port service [ 2.997264] pci_express 0000:00:1c.3:pcie02: allocate port service [ 2.997375] pci_express 0000:00:1c.3:pcie03: allocate port service [ 2.998240] isapnp: Scanning for PnP cards... [ 3.352813] isapnp: No Plug & Play device found [ 3.447340] hpet_resources: 0xfed00000 is busy [ 3.447521] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 3.453388] brd: module loaded [ 3.453578] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 3.453889] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 3.454443] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.454546] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.454559] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.454567] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.454574] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.454581] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.455597] mice: PS/2 mouse device common for all mice [ 3.455950] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 3.455995] rtc0: alarms up to one month, y3k, hpet irqs [ 3.456376] EISA: Probing bus 0 at eisa.0 [ 3.456400] Cannot allocate resource for EISA slot 1 [ 3.456407] Cannot allocate resource for EISA slot 2 [ 3.456426] Cannot allocate resource for EISA slot 5 [ 3.456450] EISA: Detected 0 cards. [ 3.456457] cpuidle: using governor ladder [ 3.456463] cpuidle: using governor menu [ 3.457771] TCP cubic registered [ 3.457828] Using IPI No-Shortcut mode [ 3.458466] registered taskstats version 1 [ 3.458497] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 3.458745] Magic number: 0:943:35 [ 3.458940] rtc_cmos 00:07: setting system clock to 2008-11-02 17:00:09 UTC (1225645209) [ 3.458950] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.458956] EDD information not available. [ 3.459362] Freeing unused kernel memory: 424k freed [ 3.459480] Write protecting the kernel text: 2576k [ 3.459552] Write protecting the kernel read-only data: 936k [ 3.773316] fuse init (API version 7.9) [ 3.862121] ACPI: SSDT 7F685F02, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 3.863190] ACPI: SSDT 7F6859BB, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 4.048906] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 4.049070] processor ACPI0007:00: registered as cooling_device0 [ 4.049081] ACPI: Processor [CPU0] (supports 8 throttling states) [ 4.049917] ACPI: SSDT 7F68613A, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 4.050908] ACPI: SSDT 7F685E7D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) [ 4.053614] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 4.053743] processor ACPI0007:01: registered as cooling_device1 [ 4.053754] ACPI: Processor [CPU1] (supports 8 throttling states) [ 4.062074] Marking TSC unstable due to TSC halts in idle [ 4.064581] thermal LNXTHERM:01: registered as thermal_zone0 [ 4.074462] ACPI: Thermal Zone [TZ00] (29 C) [ 4.079306] thermal LNXTHERM:02: registered as thermal_zone1 [ 4.089056] ACPI: Thermal Zone [TZ01] (29 C) [ 4.978065] usbcore: registered new interface driver usbfs [ 4.978120] usbcore: registered new interface driver hub [ 5.018528] usbcore: registered new device driver usb [ 5.027455] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5.027476] b43-pci-bridge 0000:05:00.0: setting latency timer to 64 [ 5.041091] USB Universal Host Controller Interface driver v3.0 [ 5.091005] No dock devices found. [ 5.130294] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 5.130397] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.130415] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.130424] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.130518] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 5.130575] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0 [ 5.130881] usb usb1: configuration #1 chosen from 1 choice [ 5.130950] hub 1-0:1.0: USB hub found [ 5.130966] hub 1-0:1.0: 2 ports detected [ 5.190926] SCSI subsystem initialized [ 5.233536] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.233556] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.233564] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.233650] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 5.233711] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0 [ 5.233950] usb usb2: configuration #1 chosen from 1 choice [ 5.234020] hub 2-0:1.0: USB hub found [ 5.234036] hub 2-0:1.0: 2 ports detected [ 5.287878] libata version 3.00 loaded. [ 5.337572] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.337594] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.337602] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.337666] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 5.337725] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0 [ 5.337965] usb usb3: configuration #1 chosen from 1 choice [ 5.338033] hub 3-0:1.0: USB hub found [ 5.338049] hub 3-0:1.0: 2 ports detected [ 5.545553] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 5.545573] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.545582] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.545653] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 5.545710] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400 [ 5.545932] usb usb4: configuration #1 chosen from 1 choice [ 5.546008] hub 4-0:1.0: USB hub found [ 5.546024] hub 4-0:1.0: 2 ports detected [ 5.657059] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 5.755292] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.755319] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.755328] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.755403] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 5.759349] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.759362] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 5.759379] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 [ 5.781135] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.781439] usb usb5: configuration #1 chosen from 1 choice [ 5.781512] hub 5-0:1.0: USB hub found [ 5.781530] hub 5-0:1.0: 8 ports detected [ 5.988874] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 5.988895] b44 0000:06:01.0: setting latency timer to 64 [ 6.048218] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 6.048543] b44.c:v2.0 [ 6.057549] ata_piix 0000:00:1f.2: version 2.12 [ 6.057579] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.057589] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 6.068900] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1b:38:1e:e9:73 [ 6.180090] usb 3-1: device not accepting address 2, error -71 [ 6.212116] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 6.212321] scsi0 : ata_piix [ 6.213113] scsi1 : ata_piix [ 6.215829] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14 [ 6.215838] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15 [ 6.236135] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 6.376670] ata1.00: ATA-7: ST9160821AS, 3.ALD, max UDMA/133 [ 6.376679] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 6.392659] ata1.00: configured for UDMA/133 [ 6.476100] usb 5-5: new high speed USB device using ehci_hcd and address 2 [ 6.500055] Clocksource tsc unstable (delta = -308551643 ns) [ 6.556628] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33 [ 6.572542] ata2.00: configured for UDMA/33 [ 6.572804] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5 [ 6.576271] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5 [ 6.612347] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.612447] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.621317] usb 5-5: configuration #1 chosen from 1 choice [ 6.670870] Driver 'sd' needs updating - please use bus_type methods [ 6.671105] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.671157] sd 0:0:0:0: [sda] Write Protect is off [ 6.671164] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.671251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.671440] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 6.671488] sd 0:0:0:0: [sda] Write Protect is off [ 6.671496] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.671583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.671595] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 6.697305] sda1 sda2 < sda5 > [ 6.726277] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.741685] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.741696] Uniform CD-ROM driver Revision: 3.20 [ 6.741923] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.088108] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 7.105216] PM: Starting manual resume from disk [ 7.105225] PM: Resume from partition 8:5 [ 7.105230] PM: Checking hibernation image. [ 7.105436] PM: Resume from disk failed. [ 7.207818] kjournald starting. Commit interval 5 seconds [ 7.207855] EXT3-fs: mounted filesystem with ordered data mode. [ 7.268227] usb 4-1: configuration #1 chosen from 1 choice [ 14.636580] udevd version 124 started [ 15.798428] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.931066] Linux agpgart interface v0.103 [ 16.055539] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.150334] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 16.151017] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 16.172544] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 16.500998] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 16.520043] ACPI: Power Button (FF) [PWRF] [ 16.520280] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 16.520436] ACPI: Lid Switch [LID] [ 16.520622] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 16.536041] ACPI: Sleep Button (CM) [SLPB] [ 16.536250] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 16.560055] ACPI: Power Button (CM) [PWRB] [ 17.180553] ACPI: WMI: Mapper loaded [ 17.325634] iTCO_vendor_support: vendor-support=0 [ 17.494409] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 17.494664] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) [ 17.494895] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.966040] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6 [ 17.976048] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 17.976622] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input7 [ 18.008066] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 18.031230] Yenta: CardBus bridge found at 0000:06:04.0 [1025:0090] [ 18.031269] Yenta: Using CSCINT to route CSC interrupts to PCI [ 18.031274] Yenta: Routing CardBus interrupts to PCI [ 18.031286] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44 [ 18.061344] intel_rng: FWH not detected [ 18.112358] ACPI: AC Adapter [ACAD] (on-line) [ 18.178645] sdhci: Secure Digital Host Controller Interface driver [ 18.178653] sdhci: Copyright(c) Pierre Ossman [ 18.260900] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 18.260910] Socket status: 30000006 [ 18.260917] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a [ 18.260931] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 18.260939] cs: IO port probe 0x2000-0x2fff: clean. [ 18.261463] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff [ 18.261470] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 18.385274] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1) [ 18.385300] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002) [ 18.385315] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 18.385477] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO [ 18.388641] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1) [ 18.388664] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002) [ 18.388676] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 18.388785] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO [ 18.548350] ACPI: Battery Slot [BAT1] (battery present) [ 18.714048] ieee80211_crypt: registered algorithm 'NULL' [ 18.718751] wl: module license 'MIXED/Proprietary' taints kernel. [ 19.321154] usbcore: registered new interface driver hiddev [ 19.347716] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input8 [ 19.368320] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1 [ 19.368380] usbcore: registered new interface driver usbhid [ 19.368389] usbhid: v2.6:USB HID core driver [ 19.576315] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 20.113102] Linux video capture interface: v2.00 [ 20.296497] b43-phy0: Broadcom 4311 WLAN found [ 20.372795] em28xx v4l2 driver version 0.1.0 loaded [ 20.372851] em28xx new video device (0ccd:005e): interface 0, class 255 [ 20.372862] em28xx Doesn't have usb audio class [ 20.372867] em28xx #0: Alternate settings: 8 [ 20.372873] em28xx #0: Alternate setting 0, max size= 0 [ 20.372879] em28xx #0: Alternate setting 1, max size= 0 [ 20.372886] em28xx #0: Alternate setting 2, max size= 1448 [ 20.372892] em28xx #0: Alternate setting 3, max size= 2048 [ 20.372898] em28xx #0: Alternate setting 4, max size= 2304 [ 20.372904] em28xx #0: Alternate setting 5, max size= 2580 [ 20.372910] em28xx #0: Alternate setting 6, max size= 2892 [ 20.372917] em28xx #0: Alternate setting 7, max size= 3072 [ 20.373266] em28xx #0: chip ID is em2882/em2883 [ 20.384486] phy0: Selected rate control algorithm 'pid' [ 20.418798] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000 [ 20.449468] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 20.563736] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c [ 20.563768] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 [ 20.563802] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 [ 20.563830] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 [ 20.563859] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.563886] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 20.563914] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 [ 20.563942] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 [ 20.563970] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 [ 20.563999] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 [ 20.564053] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 [ 20.564081] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 [ 20.564109] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 [ 20.564137] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 [ 20.564165] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 30 00 30 00 [ 20.564193] em28xx #0: i2c eeprom f0: 31 00 35 00 30 00 33 00 00 00 00 00 00 00 00 00 [ 20.564224] EEPROM ID= 0x9567eb1a, hash = 0x3b13b3be [ 20.564230] Vendor/Product ID= 0ccd:005e [ 20.564235] AC97 audio (5 sample rates) [ 20.564239] 500mA max power [ 20.564244] Table at 0x27, strings=0x409e, 0x1cde, 0x346a [ 20.564251] em28xx #0: [ 20.564253] [ 20.564259] em28xx #0: The support for this board weren't valid yet. [ 20.564266] em28xx #0: Please send a report of having this working [ 20.564272] em28xx #0: not to V4L mailing list (and/or to other addresses) [ 20.564276] [ 20.597485] acer-wmi: Acer Laptop ACPI-WMI Extras [ 20.607371] Registered led device: acer-wmi::mail [ 20.725818] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.725879] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 20.869154] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] [ 20.900603] tuner' 0-0061: chip found @ 0xc2 (em28xx #0) [ 21.015013] xc2028 0-0061: creating new instance [ 21.015022] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 21.015042] firmware: requesting xc3028-v27.fw [ 22.397651] cs: IO port probe 0x100-0x3af: clean. [ 22.401828] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 22.402869] cs: IO port probe 0x820-0x8ff: clean. [ 22.403757] cs: IO port probe 0xc00-0xcf7: clean. [ 22.405009] cs: IO port probe 0xa00-0xaff: clean. [ 22.752831] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 22.820087] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 23.272280] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700. [ 23.277524] SCODE (20000000), id 000000000000b700: [ 23.277537] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 23.308763] xc2028 0-0061: i2c input error: rc = -19 (should be 2) [ 23.308774] xc2028 0-0061: Unable to read tuner registers. [ 23.432069] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000. [ 23.868272] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700. [ 23.873518] SCODE (20000000), id 000000000000b700: [ 23.873527] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000. [ 23.904641] xc2028 0-0061: i2c input error: rc = -19 (should be 2) [ 23.904650] xc2028 0-0061: Unable to read tuner registers. [ 24.100509] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 24.116507] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 24.132380] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 24.148507] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 24.148515] tvp5150 0-005c: *** unknown tvp8081 chip detected. [ 24.148522] tvp5150 0-005c: *** Rom ver is 130.131 [ 24.204506] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 24.224503] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 24.244507] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1) [ 24.273253] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [ 24.273261] em28xx #0: Found Terratec Hybrid XS (em2882) [ 24.273342] usbcore: registered new interface driver em28xx [ 24.332691] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 24.332700] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 24.333899] Em28xx: Initialized (Em28xx Audio Extension) extension [ 25.706955] lp: driver loaded but no devices found [ 25.843876] Em28xx: Initialized (Em28xx dvb Extension) extension [ 26.220275] Adding 6048432k swap on /dev/sda5. Priority:-1 extents:1 across:6048432k [ 26.826918] EXT3 FS on sda1, internal journal [ 28.369628] type=1505 audit(1225645233.982:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4551 [ 28.824153] type=1505 audit(1225645234.438:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4556 [ 28.824562] type=1505 audit(1225645234.438:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4556 [ 28.974020] type=1505 audit(1225645234.586:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4560 [ 29.186625] ip_tables: (C) 2000-2006 Netfilter Core Team [ 31.808528] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 34.072162] apm: BIOS not found. [ 34.287578] ppdev: user-space parallel port driver [ 38.964530] tvp5150 0-005c: tvp5150am1 detected. [ 42.283954] Bluetooth: Core ver 2.13 [ 42.285164] NET: Registered protocol family 31 [ 42.285180] Bluetooth: HCI device and connection manager initialized [ 42.285282] Bluetooth: HCI socket layer initialized [ 42.379509] Bluetooth: L2CAP ver 2.11 [ 42.379525] Bluetooth: L2CAP socket layer initialized [ 42.430844] Bluetooth: RFCOMM socket layer initialized [ 42.437499] Bluetooth: RFCOMM TTY layer initialized [ 42.437516] Bluetooth: RFCOMM ver 1.10 [ 42.438698] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 42.438713] Bluetooth: BNEP filters: protocol multicast [ 42.499237] Bridge firewalling registered [ 42.502542] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 42.528682] Bluetooth: SCO (Voice Link) ver 0.6 [ 42.528698] Bluetooth: SCO socket layer initialized [ 45.529086] ACPI: EC: missing confirmations, switch off interrupt mode. [ 46.049041] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609] [ 46.049066] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.ACAD._PSR] (Node f7419ee8), AE_TIME [ 46.049133] ACPI Exception (ac-0136): AE_TIME, Error reading AC Adapter state [20080609] [ 46.710560] input: b43-phy0 as /devices/virtual/input/input11 [ 46.832106] firmware: requesting b43/ucode5.fw [ 46.844808] [drm] Initialized drm 1.1.0 20060810 [ 46.863854] firmware: requesting b43/pcm5.fw [ 46.884518] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 46.884530] pci 0000:00:02.0: setting latency timer to 64 [ 46.884741] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 46.898482] firmware: requesting b43/b0g0initvals5.fw [ 46.915082] firmware: requesting b43/b0g0bsinitvals5.fw [ 47.093141] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 47.093184] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008. [ 47.093191] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4). [ 47.262029] Registered led device: b43-phy0::tx [ 47.263066] Registered led device: b43-phy0::rx [ 47.265154] Registered led device: b43-phy0::radio [ 47.389400] NET: Registered protocol family 17 [ 48.113103] wlan0: authenticate with AP 00:1e:2a:22:01:b2 [ 48.114706] wlan0: authenticated [ 48.114715] wlan0: associate with AP 00:1e:2a:22:01:b2 [ 48.116734] wlan0: RX AssocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1) [ 48.116744] wlan0: associated [ 48.122319] wlan0: disassociating by local choice (reason=3) [ 125.541454] wlan0: authenticate with AP 00:1e:2a:22:01:b2 [ 125.541531] wlan0: authenticate with AP 00:1e:2a:22:01:b2 [ 125.554533] wlan0: authenticated [ 125.554545] wlan0: associate with AP 00:1e:2a:22:01:b2 [ 125.558964] wlan0: RX ReassocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1) [ 125.558973] wlan0: associated [ 126.325199] CPU0 attaching NULL sched-domain. [ 126.325223] CPU1 attaching NULL sched-domain. [ 126.329862] CPU0 attaching sched-domain: [ 126.329875] domain 0: span 0-1 level MC [ 126.329882] groups: 0 1 [ 126.329896] CPU1 attaching sched-domain: [ 126.329901] domain 0: span 0-1 level MC [ 126.329907] groups: 1 0 |
