staging.inyokaproject.org

Ich find das geil, man muss zwar ein wenig warten, aber irgendwann funktioniert alles ootb ☺ Irgendwas ist mir vor kurzem auch aufgefallen, neben meiner UMTS-Karte ... es wird, es wird 😉

Hi!

Jaja, kommt Zeit kommt Rat...

Hab das mal mit ins em28xx gestellt; wäre schön, wenn's Rückmeldungen für andere Karten gäbe - die "bisherige Methode" kann ich wohl wirklich rausschmeißen, bei mrec gibts jetzt nur noch das "ehemalige" em28xx-new... Schade, für ältere Distros war das ganz brauchbar.

so long
hank

Ich häng mich mal hier mit an. Ich habe es versucht wie im Wiki Artikel. Ich habe dei "rundum sorglos" lösung runtergeladen und nach einigem hin und her auch entpackt bekommen. Kaffein mag trotzdem kein Fernsehn.

Dann habe ich die Lösung untendrunter getestet mit dem Ergebnis das das Verzeichnis v4l-dvb-kernel/v4l nicht existiert (das Hauptverzeichnis ja, das unterverzeichnis nein) und damit auch nicht "make-bar" ist.

Die oben genannte Firmware ist ja auch in dem großen v2l Firmware Paket (das ich nach dem Artikel nach lsusb benötige) enthalten.

Ich bitte um Hilfe, ansonsten wars das mit Linux 😀 Ich brauch meine Cinergy als Videorekorder ...

Grüße

Hi!

AmonNascaroth schrieb:

Ich häng mich mal hier mit an. Ich habe es versucht wie im Wiki Artikel. Ich habe dei "rundum sorglos" lösung runtergeladen und nach einigem hin und her auch entpackt bekommen. Kaffein mag trotzdem kein Fernsehn.

Welche ist die Rundum-Sorglos-Lösung? Die neue firmware? Was musstest du entpacken?

Dann habe ich die Lösung untendrunter getestet mit dem Ergebnis das das Verzeichnis v4l-dvb-kernel/v4l nicht existiert (das Hauptverzeichnis ja, das unterverzeichnis nein) und damit auch nicht "make-bar" ist.

Ja, das funktioniert nicht mehr, weil die repos bei mrec nur noch das, was als em28xx-new beschrieben wird, beinhalten - ich werd's demnächst aus dem Wiki rausschmeißen, bin aber noch nicht dazu gekommen, das richtig zu überarbeiten - aber für intrepid geht das alles ja sowieso nicht (steht da auch drin...)

Die oben genannte Firmware ist ja auch in dem großen v2l Firmware Paket (das ich nach dem Artikel nach lsusb benötige) enthalten.

Meintest du viielleicht v4l-dvb? Wenn du das danach versucht hast, dann solltest du das ganze zunächst mal rückgängig machen (sudo make uninstall o.ä., sonat schau mal in der makefile nach, was da vorgesehen ist)

Ich bitte um Hilfe, ansonsten wars das mit Linux 😀

Hui, was ne Drohung... 😉 Aber erzähl' deinen potentiellen Helfern doch noch ein bißchen mehr über dein System (welche Kernelversion, 32 oder 64 bit etc. pp.), und über die Karte, die du verwendest - Cinergy ist da leider auch noch nicht so aussagekräftig (sprich: USB-id)

Ich brauch meine Cinergy als Videorekorder ...

Na, wohl eher Kaffeine o.ä.. 🤓

Aber nicht verzagen; meistens bekommt man es früher oder später hin ☺

so long
hank

Danke schon mal für die Antwort. Mh mit Rund um sorglos meinte ich das Paket ganz oben auf der Seite http://wiki.ubuntuusers.de/em28xx?highlight=cinergy ("Fertige Pakete")

Das habe ich zwar nach lib/firmware entpacken können, brachte aber auch nichts. Die Anleitung darunter brachte eben auch nur zwei Zusätzliche Ordner im System, make hat nichts ausgeführt da es nichts zum Ausführen gibt (so make).

Die oben genannte einzelne Firmware habe ich nicht nach lib/firmware entpacken können. Bin ja Linux Neuling.

Ansonsten brauche ich laut dem obigen Wiki Artikel und lsusb Bus 005 Device 002: ID 0ccd:005e TerraTec Electronic GmbH Firmware V2. Wie gesagt, entpackt sollte sie sein aber gewirkt hat es nicht.

Bei meiner Cinergy handelt es sich um ganz genau zu sein um diese http://www.terratec.net/de/produkte/Cinergy_Hybrid_T_USB_XS_FM_2011.html

Mein Ubuntu ist das neueste Verfügbare mit 32Bit auf einem Intel Laptop. Für weitere Informationen musst du mir sagen wo ich sie her bekomme 😀

Grüße

Edit: Und klar ist, dass Kaffein am Ende mein Rekorder ist, aber die Rekorderhardware besteht aus USB Bus und Cinergy 😀

Hi!

also, bei dir ist intrepid installiert, und das Kommando

uname -r

im Terminal ausgeführt, ergibt

2.6.27-7-generic

oder ähnlich?

Wenn da "2.6.27" drinsteht, brauchst du (wenn denn deine Karte unterstützt wird, sollte sie, weiß ich aber nicht) nur die im allerersten Firmware für Intrepid Ibex verlinkte firmware-Datei mit Rootrechten nach /lib/firmware kopieren. Das sollte es gewesen sein; Karte ab und wieder anstecken, ggf. neu starten.

Die ansonsten erwähnte Firmware brauchst nicht, vergiss alles, was dazu im Wiki steht, das ist veraltet, ich lösch es nachher!

Wenn du noch kein Intrepid hast (uname -r also etwas mit 2.6.24 ausgibt) kannst du die anderen Methoden (bis auf die "Bisherige Methode"!!) verwenden; fertige Pakete für 2.6.24-21 ist allerdings anscheinend noch nicht auf dem verlinkten Server; du findest ein Paket für "standard-32-bit"-2.6.24-21 hier: http://mcentral.de/empia/empia-2.6.24-21-generic-2_i386.deb. Ansonsten im Terminal zu /Pfad/zum/Verzeichnis/dvb-v4l-experimental wechseln (woimmer du das abgespeichert hast, vermutlich in deinem Home-Verzeichnis) und dann nach dieser Anleitung vorgehen.

Viel Erfolg

so long
hank

Danke

2.6.27-7-generic

Habe ich in der tat und darauf hin auch den von dir gezeigten Link ausgeführt:

wget http://media.ubuntuusers.de/forum/attachments/1654867/xc3028-v27.fw 

herunterladen und dann z.B. per

sudo cp xc3028-v27.fw /lib/firmware 

in das Verzeichnis /lib/firmware verschieben. Alle im Weiteren beschriebenen Methoden greifen für intrepid nicht, sind aber für die meisten em28xx-basierten Karten auch nicht mehr nötig. Allerdings gibt es momentan noch Probleme, die Fernbedienung per lirc zu verwenden.

Danach kam keine Meldung. Aber das ist ja eh nicht Pflicht so wie ich das sehe, also Kaffein gestartet: Ich find das Gerät nicht. Okay, Kaffein aus, Cinergy raus-, reinstecken und Kaffein einschalten. Nichts. Neustart: Nichts. Bin ich zu doof das ins Kaffein zu packen oder klemmts noch wo anders?

Der Treiber für den Stick mit der USB ID 0ccd:005e ist im Kernel von Intrepid enthalten...starte doch mal den Rechner neu und poste die Ausgabe von

dmesg

Hi!

Mal den Rechner neustarten?

Mal 'nen anderen Player versucht? VLC läuft hervorragend, musst dir allerdings erst ne channels.conf anlegen, siehe w scan

so long
hank

Frisch nach dem neustarten:

[    1.204903] bus: 03 index 0 mmio: [0, 0]
[    1.204909] bus: 03 index 1 mmio: [0, 0]
[    1.204914] bus: 03 index 2 mmio: [0, 0]
[    1.204919] bus: 03 index 3 mmio: [0, 0]
[    1.204924] bus: 04 index 0 mmio: [0, 0]
[    1.204929] bus: 04 index 1 mmio: [0, 0]
[    1.204935] bus: 04 index 2 mmio: [0, 0]
[    1.204940] bus: 04 index 3 mmio: [0, 0]
[    1.204945] bus: 05 index 0 mmio: [0, 0]
[    1.204951] bus: 05 index 1 mmio: [d0000000, d00fffff]
[    1.204957] bus: 05 index 2 mmio: [0, 0]
[    1.204962] bus: 05 index 3 mmio: [0, 0]
[    1.204968] bus: 06 index 0 io port: [2000, 2fff]
[    1.204974] bus: 06 index 1 mmio: [d0100000, d01fffff]
[    1.204980] bus: 06 index 2 mmio: [88000000, 8bffffff]
[    1.204986] bus: 06 index 3 io port: [0, ffff]
[    1.204992] bus: 06 index 4 mmio: [0, ffffffff]
[    1.204998] bus: 07 index 0 io port: [2000, 20ff]
[    1.205004] bus: 07 index 1 io port: [2400, 24ff]
[    1.205010] bus: 07 index 2 mmio: [88000000, 8bffffff]
[    1.205016] bus: 07 index 3 mmio: [8c000000, 8fffffff]
[    1.205038] NET: Registered protocol family 2
[    1.220125] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.220679] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.221601] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.222062] TCP: Hash tables configured (established 131072 bind 65536)
[    1.222070] TCP reno registered
[    1.228186] NET: Registered protocol family 1
[    1.228443] checking if image is initramfs... it is
[    2.965531] Freeing initrd memory: 7931k freed
[    2.966116] Simple Boot Flag at 0x36 set to 0x1
[    2.968171] audit: initializing netlink socket (disabled)
[    2.968212] type=2000 audit(1225536353.964:1): initialized
[    2.983775] highmem bounce pool size: 64 pages
[    2.983792] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.990174] VFS: Disk quotas dquot_6.5.1
[    2.990400] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.990660] msgmni has been set to 1743
[    2.990968] io scheduler noop registered
[    2.990976] io scheduler anticipatory registered
[    2.990982] io scheduler deadline registered
[    2.991014] io scheduler cfq registered (default)
[    2.991041] pci 0000:00:02.0: Boot video device
[    2.991516] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    2.991589] pcieport-driver 0000:00:1c.0: found MSI capability
[    2.991664] pci_express 0000:00:1c.0:pcie00: allocate port service
[    2.991781] pci_express 0000:00:1c.0:pcie02: allocate port service
[    2.991893] pci_express 0000:00:1c.0:pcie03: allocate port service
[    2.992120] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    2.992190] pcieport-driver 0000:00:1c.1: found MSI capability
[    2.992260] pci_express 0000:00:1c.1:pcie00: allocate port service
[    2.992373] pci_express 0000:00:1c.1:pcie02: allocate port service
[    2.992488] pci_express 0000:00:1c.1:pcie03: allocate port service
[    2.992699] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    2.992768] pcieport-driver 0000:00:1c.2: found MSI capability
[    2.992838] pci_express 0000:00:1c.2:pcie00: allocate port service
[    2.992949] pci_express 0000:00:1c.2:pcie02: allocate port service
[    2.993070] pci_express 0000:00:1c.2:pcie03: allocate port service
[    2.993283] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    2.993354] pcieport-driver 0000:00:1c.3: found MSI capability
[    2.993423] pci_express 0000:00:1c.3:pcie00: allocate port service
[    2.993541] pci_express 0000:00:1c.3:pcie02: allocate port service
[    2.993654] pci_express 0000:00:1c.3:pcie03: allocate port service
[    2.994518] isapnp: Scanning for PnP cards...
[    3.987141] isapnp: No Plug & Play device found
[    4.082025] hpet_resources: 0xfed00000 is busy
[    4.082194] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    4.088101] brd: module loaded
[    4.088289] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    4.088603] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    4.089341] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.089443] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.089456] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.089464] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.089470] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.089477] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.092321] mice: PS/2 mouse device common for all mice
[    4.092684] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    4.092728] rtc0: alarms up to one month, y3k, hpet irqs
[    4.093097] EISA: Probing bus 0 at eisa.0
[    4.093110] Cannot allocate resource for EISA slot 1
[    4.093129] Cannot allocate resource for EISA slot 2
[    4.093149] Cannot allocate resource for EISA slot 5
[    4.093173] EISA: Detected 0 cards.
[    4.093180] cpuidle: using governor ladder
[    4.093186] cpuidle: using governor menu
[    4.094496] TCP cubic registered
[    4.094553] Using IPI No-Shortcut mode
[    4.095034] registered taskstats version 1
[    4.095321]   Magic number: 0:400:779
[    4.095425] tty ptyq1: hash matches
[    4.095528] rtc_cmos 00:07: setting system clock to 2008-11-01 10:45:56 UTC (1225536356)
[    4.095536] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.095542] EDD information not available.
[    4.095947] Freeing unused kernel memory: 424k freed
[    4.096086] Write protecting the kernel text: 2576k
[    4.096158] Write protecting the kernel read-only data: 936k
[    4.098759] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    4.409310] fuse init (API version 7.9)
[    4.498109] ACPI: SSDT 7F685F02, 0238 (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
[    4.499178] ACPI: SSDT 7F6859BB, 04C2 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
[    4.672197] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    4.672348] processor ACPI0007:00: registered as cooling_device0
[    4.672359] ACPI: Processor [CPU0] (supports 8 throttling states)
[    4.673190] ACPI: SSDT 7F68613A, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
[    4.674181] ACPI: SSDT 7F685E7D, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
[    4.676856] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    4.676984] processor ACPI0007:01: registered as cooling_device1
[    4.676995] ACPI: Processor [CPU1] (supports 8 throttling states)
[    4.685027] Marking TSC unstable due to TSC halts in idle
[    4.688909] thermal LNXTHERM:01: registered as thermal_zone0
[    4.698680] ACPI: Thermal Zone [TZ00] (54 C)
[    4.703697] thermal LNXTHERM:02: registered as thermal_zone1
[    4.713202] ACPI: Thermal Zone [TZ01] (54 C)
[    5.523033] usbcore: registered new interface driver usbfs
[    5.523085] usbcore: registered new interface driver hub
[    5.523207] usbcore: registered new device driver usb
[    5.543040] USB Universal Host Controller Interface driver v3.0
[    5.543133] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.543150] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.543159] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.543258] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    5.543324] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[    5.543620] usb usb1: configuration #1 chosen from 1 choice
[    5.543695] hub 1-0:1.0: USB hub found
[    5.543712] hub 1-0:1.0: 2 ports detected
[    5.645542] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.645561] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.645570] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.645635] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    5.645702] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
[    5.645923] usb usb2: configuration #1 chosen from 1 choice
[    5.645997] hub 2-0:1.0: USB hub found
[    5.646013] hub 2-0:1.0: 2 ports detected
[    5.737671] No dock devices found.
[    5.776059] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.776079] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.776088] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.776150] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    5.776217] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
[    5.776462] usb usb3: configuration #1 chosen from 1 choice
[    5.776534] hub 3-0:1.0: USB hub found
[    5.776550] hub 3-0:1.0: 2 ports detected
[    5.789965] SCSI subsystem initialized
[    5.880027] libata version 3.00 loaded.
[    5.981541] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    5.981561] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.981570] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.981630] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    5.981699] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
[    5.981936] usb usb4: configuration #1 chosen from 1 choice
[    5.982006] hub 4-0:1.0: USB hub found
[    5.982024] hub 4-0:1.0: 2 ports detected
[    6.093197] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    6.189879] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.189910] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    6.189919] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    6.189984] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    6.193918] ehci_hcd 0000:00:1d.7: debug port 1
[    6.193933] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    6.193951] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[    6.217072] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.217562] usb usb5: configuration #1 chosen from 1 choice
[    6.217646] hub 5-0:1.0: USB hub found
[    6.217665] hub 5-0:1.0: 8 ports detected
[    6.425617] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    6.425638] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[    6.485204] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[    6.494095] ata_piix 0000:00:1f.2: version 2.12
[    6.494124] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.494134] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    6.613089] usb 3-1: device not accepting address 2, error -71
[    6.648139] ata_piix 0000:00:1f.2: setting latency timer to 64
[    6.648288] scsi0 : ata_piix
[    6.648529] scsi1 : ata_piix
[    6.651257] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14
[    6.651265] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15
[    6.668172] hub 3-0:1.0: unable to enumerate USB device on port 1
[    6.813583] ata1.00: ATA-7: ST9160821AS, 3.ALD, max UDMA/133
[    6.813592] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    6.830251] ata1.00: configured for UDMA/133
[    6.909115] usb 5-5: new high speed USB device using ehci_hcd and address 2
[    6.992680] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[    7.000053] Clocksource tsc unstable (delta = -215009659 ns)
[    7.009596] ata2.00: configured for UDMA/33
[    7.009823] scsi 0:0:0:0: Direct-Access     ATA      ST9160821AS      3.AL PQ: 0 ANSI: 5
[    7.013536] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
[    7.013812] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    7.013830] b44 0000:06:01.0: setting latency timer to 64
[    7.054404] usb 5-5: configuration #1 chosen from 1 choice
[    7.073150] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
[    7.073340] b44.c:v2.0
[    7.092659] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    7.092758] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    7.094160] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1b:38:1e:e9:73
[    7.157322] Driver 'sd' needs updating - please use bus_type methods
[    7.157562] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    7.157616] sd 0:0:0:0: [sda] Write Protect is off
[    7.157623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.157710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.157894] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    7.157943] sd 0:0:0:0: [sda] Write Protect is off
[    7.157950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.158037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.158048]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    7.306737]  sda1 sda2 < sda5 >
[    7.346872] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.350567] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.350578] Uniform CD-ROM driver Revision: 3.20
[    7.350765] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.355526] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    7.532566] usb 4-1: configuration #1 chosen from 1 choice
[    7.581358] usbcore: registered new interface driver hiddev
[    7.596563] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2
[    7.598006] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1
[    7.598054] usbcore: registered new interface driver usbhid
[    7.598062] usbhid: v2.6:USB HID core driver
[   13.826767] PM: Starting manual resume from disk
[   13.826776] PM: Resume from partition 8:5
[   13.826781] PM: Checking hibernation image.
[   13.826991] PM: Resume from disk failed.
[   13.924285] kjournald starting.  Commit interval 5 seconds
[   13.924310] EXT3-fs: mounted filesystem with ordered data mode.
[   21.630663] udevd version 124 started
[   22.585597] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   22.643170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.968534] Linux agpgart interface v0.103
[   23.088994] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[   23.089692] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   23.110351] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   23.334537] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   23.353056] ACPI: Power Button (FF) [PWRF]
[   23.353233] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   23.353392] ACPI: Lid Switch [LID]
[   23.353526] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[   23.369039] ACPI: Sleep Button (CM) [SLPB]
[   23.369282] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   23.383217] iTCO_vendor_support: vendor-support=0
[   23.401059] ACPI: Power Button (CM) [PWRB]
[   23.422963] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   23.423297] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   23.423555] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   23.497790] ACPI: WMI: Mapper loaded
[   24.088180] intel_rng: FWH not detected
[   24.814655] Yenta: CardBus bridge found at 0000:06:04.0 [1025:0090]
[   24.814695] Yenta: Using CSCINT to route CSC interrupts to PCI
[   24.814701] Yenta: Routing CardBus interrupts to PCI
[   24.814713] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[   24.958915] ieee80211_crypt: registered algorithm 'NULL'
[   24.963633] wl: module license 'MIXED/Proprietary' taints kernel.
[   25.048903] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   25.048912] Socket status: 30000006
[   25.048920] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   25.048934] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   25.048941] cs: IO port probe 0x2000-0x2fff: clean.
[   25.049465] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[   25.049472] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[   25.276972] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[   25.296057] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   25.296635] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input8
[   25.328063] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   25.341235] ACPI: AC Adapter [ACAD] (on-line)
[   25.479794] sdhci: Secure Digital Host Controller Interface driver
[   25.479803] sdhci: Copyright(c) Pierre Ossman
[   25.516120] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[   25.516146] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
[   25.516161] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   25.516590] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[   25.516621] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[   25.516643] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[   25.516656] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   25.516874] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[   25.748338] ACPI: Battery Slot [BAT1] (battery present)
[   26.414337] b43-phy0: Broadcom 4311 WLAN found
[   26.489641] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   26.489693] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   26.497985] phy0: Selected rate control algorithm 'pid'
[   26.818637] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   26.920496] Linux video capture interface: v2.00
[   27.170127] em28xx v4l2 driver version 0.1.0 loaded
[   27.173875] em28xx new video device (0ccd:005e): interface 0, class 255
[   27.173887] em28xx Doesn't have usb audio class
[   27.173893] em28xx #0: Alternate settings: 8
[   27.173899] em28xx #0: Alternate setting 0, max size= 0
[   27.173905] em28xx #0: Alternate setting 1, max size= 0
[   27.173911] em28xx #0: Alternate setting 2, max size= 1448
[   27.173918] em28xx #0: Alternate setting 3, max size= 2048
[   27.173924] em28xx #0: Alternate setting 4, max size= 2304
[   27.173930] em28xx #0: Alternate setting 5, max size= 2580
[   27.173936] em28xx #0: Alternate setting 6, max size= 2892
[   27.173942] em28xx #0: Alternate setting 7, max size= 3072
[   27.174207] em28xx #0: chip ID is em2882/em2883
[   27.188542] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[   27.365949] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
[   27.365981] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[   27.366009] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
[   27.366037] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[   27.366065] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   27.366093] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   27.366121] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[   27.366149] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[   27.366177] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[   27.366205] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
[   27.366233] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[   27.366261] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
[   27.366289] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
[   27.366317] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
[   27.366345] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 30 00 30 00
[   27.366373] em28xx #0: i2c eeprom f0: 31 00 35 00 30 00 33 00 00 00 00 00 00 00 00 00
[   27.366404] EEPROM ID= 0x9567eb1a, hash = 0x3b13b3be
[   27.366410] Vendor/Product ID= 0ccd:005e
[   27.366414] AC97 audio (5 sample rates)
[   27.366419] 500mA max power
[   27.366424] Table at 0x27, strings=0x409e, 0x1cde, 0x346a
[   27.366430] em28xx #0: 
[   27.366432] 
[   27.366439] em28xx #0: The support for this board weren't valid yet.
[   27.366445] em28xx #0: Please send a report of having this working
[   27.366452] em28xx #0: not to V4L mailing list (and/or to other addresses)
[   27.366455] 
[   27.552197] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[   27.627574] acer-wmi: Acer Laptop ACPI-WMI Extras
[   27.740472] xc2028 0-0061: creating new instance
[   27.740481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   27.740502] firmware: requesting xc3028-v27.fw
[   27.795347] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[   27.826075] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[   27.874926] Registered led device: acer-wmi::mail
[   29.402847] cs: IO port probe 0x100-0x3af: clean.
[   29.405347] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   29.406364] cs: IO port probe 0x820-0x8ff: clean.
[   29.407218] cs: IO port probe 0xc00-0xcf7: clean.
[   29.408416] cs: IO port probe 0xa00-0xaff: clean.
[   29.544585] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   29.616049] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[   30.112261] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700.
[   30.117498] SCODE (20000000), id 000000000000b700:
[   30.117510] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[   30.152618] xc2028 0-0061: i2c input error: rc = -19 (should be 2)
[   30.152629] xc2028 0-0061: Unable to read tuner registers.
[   30.276065] xc2028 0-0061: Loading firmware for type=BASE (1), id 0000000000000000.
[   30.712375] xc2028 0-0061: Loading firmware for type=(0), id 000000000000b700.
[   30.717619] SCODE (20000000), id 000000000000b700:
[   30.717629] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
[   30.748745] xc2028 0-0061: i2c input error: rc = -19 (should be 2)
[   30.748753] xc2028 0-0061: Unable to read tuner registers.
[   30.944489] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1)
[   30.960489] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1)
[   30.976487] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1)
[   30.992487] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1)
[   30.992494] tvp5150 0-005c: *** unknown tvp8081 chip detected.
[   30.992501] tvp5150 0-005c: *** Rom ver is 130.131
[   31.048486] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1)
[   31.068484] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1)
[   31.088489] tvp5150 debug 0-005c: i2c i/o error: rc == -19 (should be 1)
[   31.117356] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[   31.117364] em28xx #0: Found Terratec Hybrid XS (em2882)
[   31.117442] usbcore: registered new interface driver em28xx
[   31.212906] em28xx-audio.c: probing for em28x1 non standard usbaudio
[   31.212914] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[   31.213850] Em28xx: Initialized (Em28xx Audio Extension) extension
[   31.709297] lp: driver loaded but no devices found
[   32.237298] Adding 6048432k swap on /dev/sda5.  Priority:-1 extents:1 across:6048432k
[   32.784131] ACPI: EC: missing confirmations, switch off interrupt mode.
[   33.304106] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[   33.304125] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.ACAD._PSR] (Node f7419ee8), AE_TIME
[   33.304234] ACPI Exception (ac-0136): AE_TIME, Error reading AC Adapter state [20080609]
[   33.911460] EXT3 FS on sda1, internal journal
[   35.353823] type=1505 audit(1225536388.008:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4564
[   35.808645] type=1505 audit(1225536388.464:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4569
[   35.809083] type=1505 audit(1225536388.464:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4569
[   36.051893] ip_tables: (C) 2000-2006 Netfilter Core Team
[   38.680252] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   38.786965] apm: BIOS not found.
[   38.950703] ppdev: user-space parallel port driver
[   42.082628] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   42.082647] vboxdrv: Successfully done.
[   42.082653] vboxdrv: Found 2 processor cores.
[   42.085608] vboxdrv: fAsync=0 offMin=0x632 offMax=0x1e1d
[   42.085633] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   42.085647] vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000).
[   44.004568] tvp5150 0-005c: tvp5150am1 detected.
[   45.127895] Bluetooth: Core ver 2.13
[   45.129981] NET: Registered protocol family 31
[   45.129994] Bluetooth: HCI device and connection manager initialized
[   45.130002] Bluetooth: HCI socket layer initialized
[   45.162039] Bluetooth: L2CAP ver 2.11
[   45.162055] Bluetooth: L2CAP socket layer initialized
[   45.191228] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   45.191245] Bluetooth: BNEP filters: protocol multicast
[   45.264935] Bridge firewalling registered
[   45.265589] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   45.299860] Bluetooth: SCO (Voice Link) ver 0.6
[   45.299875] Bluetooth: SCO socket layer initialized
[   45.315477] Bluetooth: RFCOMM socket layer initialized
[   45.315965] Bluetooth: RFCOMM TTY layer initialized
[   45.315978] Bluetooth: RFCOMM ver 1.10
[   49.529453] input: b43-phy0 as /devices/virtual/input/input11
[   49.640071] firmware: requesting b43/ucode5.fw
[   49.671913] firmware: requesting b43/pcm5.fw
[   49.675637] firmware: requesting b43/b0g0initvals5.fw
[   49.680315] firmware: requesting b43/b0g0bsinitvals5.fw
[   49.862783] [drm] Initialized drm 1.1.0 20060810
[   49.868374] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   49.868388] pci 0000:00:02.0: setting latency timer to 64
[   49.869787] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   49.928067] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[   49.928083] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
[   49.928090] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   50.099444] Registered led device: b43-phy0::tx
[   50.100161] Registered led device: b43-phy0::rx
[   50.100515] Registered led device: b43-phy0::radio
[   50.483178] NET: Registered protocol family 17
[   51.040170] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[   51.041826] wlan0: authenticated
[   51.041841] wlan0: associate with AP 00:1e:2a:22:01:b2
[   51.043837] wlan0: RX AssocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1)
[   51.043845] wlan0: associated
[   51.063332] wlan0: disassociating by local choice (reason=3)
[   83.199725] UDF-fs: No VRS found
[   83.214687] ISO 9660 Extensions: Microsoft Joliet Level 3
[   83.216457] ISOFS: changing to secondary root
[   91.916187] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[   91.924196] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[   91.926288] wlan0: authenticated
[   91.926303] wlan0: associate with AP 00:1e:2a:22:01:b2
[   91.934410] wlan0: RX ReassocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1)
[   91.934424] wlan0: associated
[   92.901708] CPU0 attaching NULL sched-domain.
[   92.901736] CPU1 attaching NULL sched-domain.
[   92.912162] CPU0 attaching sched-domain:
[   92.912177]  domain 0: span 0-1 level MC
[   92.912185]   groups: 0 1
[   92.912199] CPU1 attaching sched-domain:
[   92.912205]  domain 0: span 0-1 level MC
[   92.912211]   groups: 1 0

Werf mal die Firmware wieder runter

sudo rm /lib/firmware/xc3028-v27.fw

Neustart und den Stick kurz ab und wieder einstöpseln...und dann nochmal die Ausgabe von

dmesg

[    4.860257] USB Universal Host Controller Interface driver v3.0
[    4.896167] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[    4.896271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    4.896288] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    4.896297] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.896386] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    4.896444] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[    4.896751] usb usb1: configuration #1 chosen from 1 choice
[    4.896821] hub 1-0:1.0: USB hub found
[    4.896838] hub 1-0:1.0: 2 ports detected
[    4.982021] No dock devices found.
[    5.021717] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.021736] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.021745] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.021811] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    5.021869] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
[    5.022096] usb usb2: configuration #1 chosen from 1 choice
[    5.022165] hub 2-0:1.0: USB hub found
[    5.022181] hub 2-0:1.0: 2 ports detected
[    5.102387] SCSI subsystem initialized
[    5.149533] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.149554] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.149563] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.149655] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    5.149713] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
[    5.149941] usb usb3: configuration #1 chosen from 1 choice
[    5.150010] hub 3-0:1.0: USB hub found
[    5.150026] hub 3-0:1.0: 2 ports detected
[    5.170658] libata version 3.00 loaded.
[    5.357550] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    5.357570] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.357579] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.357642] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    5.357705] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
[    5.357943] usb usb4: configuration #1 chosen from 1 choice
[    5.358012] hub 4-0:1.0: USB hub found
[    5.358029] hub 4-0:1.0: 2 ports detected
[    5.469068] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    5.565972] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.566001] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.566010] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.566086] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    5.570021] ehci_hcd 0000:00:1d.7: debug port 1
[    5.570035] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    5.570054] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[    5.596048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    5.596380] usb usb5: configuration #1 chosen from 1 choice
[    5.596453] hub 5-0:1.0: USB hub found
[    5.596472] hub 5-0:1.0: 8 ports detected
[    5.804973] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    5.804994] b44 0000:06:01.0: setting latency timer to 64
[    5.872185] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
[    5.881015] b44.c:v2.0
[    5.882089] ata_piix 0000:00:1f.2: version 2.12
[    5.882117] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.882127] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    5.904857] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1b:38:1e:e9:73
[    5.988111] usb 3-1: device not accepting address 2, error -71
[    6.036131] ata_piix 0000:00:1f.2: setting latency timer to 64
[    6.036345] scsi0 : ata_piix
[    6.037138] scsi1 : ata_piix
[    6.039856] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14
[    6.039865] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15
[    6.045131] hub 3-0:1.0: unable to enumerate USB device on port 1
[    6.201111] ata1.00: ATA-7: ST9160821AS, 3.ALD, max UDMA/133
[    6.201120] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    6.217770] ata1.00: configured for UDMA/133
[    6.284122] usb 5-5: new high speed USB device using ehci_hcd and address 2
[    6.380628] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[    6.396622] ata2.00: configured for UDMA/33
[    6.396898] scsi 0:0:0:0: Direct-Access     ATA      ST9160821AS      3.AL PQ: 0 ANSI: 5
[    6.400441] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
[    6.428121] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    6.428223] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    6.434743] usb 5-5: configuration #1 chosen from 1 choice
[    6.486880] Driver 'sr' needs updating - please use bus_type methods
[    6.488496] Driver 'sd' needs updating - please use bus_type methods
[    6.488863] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    6.488916] sd 0:0:0:0: [sda] Write Protect is off
[    6.488924] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.489099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.489285] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    6.489335] sd 0:0:0:0: [sda] Write Protect is off
[    6.489342] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.489429] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.489441]  sda:sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.490737] Uniform CD-ROM driver Revision: 3.20
[    6.490920] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.500031] Clocksource tsc unstable (delta = -237256051 ns)
[    6.644282]  sda1 sda2 < sda5 >
[    6.695532] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.848135] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    7.024000] usb 4-1: configuration #1 chosen from 1 choice
[    7.068288] usbcore: registered new interface driver hiddev
[    7.084570] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2
[    7.085195] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1
[    7.085243] usbcore: registered new interface driver usbhid
[    7.085251] usbhid: v2.6:USB HID core driver
[   13.073333] PM: Starting manual resume from disk
[   13.073342] PM: Resume from partition 8:5
[   13.073347] PM: Checking hibernation image.
[   13.073586] PM: Resume from disk failed.
[   13.161843] kjournald starting.  Commit interval 5 seconds
[   13.161867] EXT3-fs: mounted filesystem with ordered data mode.
[   16.340120] udevd version 124 started
[   20.776628] ACPI: WMI: Mapper loaded
[   20.951727] acer-wmi: Acer Laptop ACPI-WMI Extras
[   20.962146] Registered led device: acer-wmi::mail
[   20.985538] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   21.388639] iTCO_vendor_support: vendor-support=0
[   21.488223] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   21.497194] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   21.497404] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   21.545930] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   21.575598] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.010173] intel_rng: FWH not detected
[   22.087917] Linux agpgart interface v0.103
[   22.231576] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[   22.232252] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   22.251768] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   22.502713] Yenta: CardBus bridge found at 0000:06:04.0 [1025:0090]
[   22.502751] Yenta: Using CSCINT to route CSC interrupts to PCI
[   22.502757] Yenta: Routing CardBus interrupts to PCI
[   22.502769] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[   22.732894] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   22.732903] Socket status: 30000006
[   22.732911] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   22.732924] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   22.732931] cs: IO port probe 0x2000-0x2fff: clean.
[   22.733456] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[   22.733463] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[   22.801832] sdhci: Secure Digital Host Controller Interface driver
[   22.801840] sdhci: Copyright(c) Pierre Ossman
[   22.872859] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[   22.872885] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
[   22.872899] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   22.873100] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[   22.876134] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[   22.876156] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[   22.876168] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   22.876298] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[   23.003553] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[   23.034109] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
[   23.141270] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   23.201237] ACPI: Power Button (FF) [PWRF]
[   23.201393] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[   23.229417] ACPI: Lid Switch [LID]
[   23.229564] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[   23.277246] ACPI: Sleep Button (CM) [SLPB]
[   23.277404] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
[   23.309228] ACPI: Power Button (CM) [PWRB]
[   23.596889] ieee80211_crypt: registered algorithm 'NULL'
[   23.601620] wl: module license 'MIXED/Proprietary' taints kernel.
[   24.592334] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input9
[   24.641302] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   24.641897] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input10
[   24.681315] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   24.703953] ACPI: AC Adapter [ACAD] (on-line)
[   25.231350] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   25.231404] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   25.444333] ACPI: Battery Slot [BAT1] (battery present)
[   26.204179] b43-phy0: Broadcom 4311 WLAN found
[   26.289134] phy0: Selected rate control algorithm 'pid'
[   26.510742] cs: IO port probe 0x100-0x3af: clean.
[   26.513282] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   26.514310] cs: IO port probe 0x820-0x8ff: clean.
[   26.515146] cs: IO port probe 0xc00-0xcf7: clean.
[   26.516364] cs: IO port probe 0xa00-0xaff: clean.
[   26.762575] Linux video capture interface: v2.00
[   26.845766] em28xx v4l2 driver version 0.1.0 loaded
[   26.845821] em28xx new video device (0ccd:005e): interface 0, class 255
[   26.845832] em28xx Doesn't have usb audio class
[   26.845838] em28xx #0: Alternate settings: 8
[   26.845844] em28xx #0: Alternate setting 0, max size= 0
[   26.845850] em28xx #0: Alternate setting 1, max size= 0
[   26.845856] em28xx #0: Alternate setting 2, max size= 1448
[   26.845862] em28xx #0: Alternate setting 3, max size= 2048
[   26.845869] em28xx #0: Alternate setting 4, max size= 2304
[   26.845875] em28xx #0: Alternate setting 5, max size= 2580
[   26.845881] em28xx #0: Alternate setting 6, max size= 2892
[   26.845887] em28xx #0: Alternate setting 7, max size= 3072
[   26.846717] em28xx #0: chip ID is em2882/em2883
[   26.858108] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[   27.035318] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
[   27.035350] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[   27.035378] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
[   27.035406] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[   27.035434] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   27.035462] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   27.035490] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[   27.035517] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[   27.035545] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[   27.035573] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
[   27.035601] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[   27.035629] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
[   27.035657] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
[   27.035685] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
[   27.035713] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 30 00 30 00
[   27.035741] em28xx #0: i2c eeprom f0: 31 00 35 00 30 00 33 00 00 00 00 00 00 00 00 00
[   27.035772] EEPROM ID= 0x9567eb1a, hash = 0x3b13b3be
[   27.035777] Vendor/Product ID= 0ccd:005e
[   27.035782] AC97 audio (5 sample rates)
[   27.035786] 500mA max power
[   27.035792] Table at 0x27, strings=0x409e, 0x1cde, 0x346a
[   27.035798] em28xx #0: 
[   27.035800] 
[   27.035806] em28xx #0: The support for this board weren't valid yet.
[   27.035813] em28xx #0: Please send a report of having this working
[   27.035819] em28xx #0: not to V4L mailing list (and/or to other addresses)
[   27.035823] 
[   27.190327] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[   27.314443] xc2028 0-0061: creating new instance
[   27.314452] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   27.314472] firmware: requesting xc3028-v27.fw
[   27.358287] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[   27.453334] tvp5150 0-005c: tvp5150am1 detected.
[   27.613314] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[   27.613325] em28xx #0: Found Terratec Hybrid XS (em2882)
[   27.613412] usbcore: registered new interface driver em28xx
[   27.710120] em28xx-audio.c: probing for em28x1 non standard usbaudio
[   27.710129] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[   27.711311] Em28xx: Initialized (Em28xx Audio Extension) extension
[   33.031097] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   33.031110] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   33.031122] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   33.031135] end_request: I/O error, dev sr0, sector 3890872
[   33.031146] Buffer I/O error on device sr0, logical block 486359
[   39.016685] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   39.016695] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   39.016705] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   39.016717] end_request: I/O error, dev sr0, sector 3890872
[   39.016725] Buffer I/O error on device sr0, logical block 486359
[   45.003378] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   45.003389] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   45.003399] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   45.003411] end_request: I/O error, dev sr0, sector 3890872
[   45.003419] Buffer I/O error on device sr0, logical block 486359
[   50.987821] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   50.987832] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   50.987842] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   50.987854] end_request: I/O error, dev sr0, sector 3890872
[   50.987862] Buffer I/O error on device sr0, logical block 486359
[   56.976308] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   56.976318] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   56.976328] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   56.976340] end_request: I/O error, dev sr0, sector 3890872
[   56.976348] Buffer I/O error on device sr0, logical block 486359
[   62.958936] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   62.958947] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   62.958957] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   62.958969] end_request: I/O error, dev sr0, sector 3890872
[   62.958977] Buffer I/O error on device sr0, logical block 486359
[   68.947360] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   68.947370] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   68.947380] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   68.947392] end_request: I/O error, dev sr0, sector 3890872
[   68.947400] Buffer I/O error on device sr0, logical block 486359
[   74.929921] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   74.929931] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   74.929941] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   74.929953] end_request: I/O error, dev sr0, sector 3890816
[   74.929961] Buffer I/O error on device sr0, logical block 486352
[   80.915990] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   80.916000] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   80.916029] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   80.916041] end_request: I/O error, dev sr0, sector 3890872
[   80.916049] Buffer I/O error on device sr0, logical block 486359
[   86.901322] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[   86.901332] sr 1:0:0:0: [sr0] Sense Key : Medium Error [current] 
[   86.901342] sr 1:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[   86.901354] end_request: I/O error, dev sr0, sector 3890872
[   86.901362] Buffer I/O error on device sr0, logical block 486359
[   88.442572] lp: driver loaded but no devices found
[   88.794013] Adding 6048432k swap on /dev/sda5.  Priority:-1 extents:1 across:6048432k
[   89.402782] EXT3 FS on sda1, internal journal
[   90.844992] type=1505 audit(1225539702.800:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4564
[   91.300615] type=1505 audit(1225539703.253:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4569
[   91.301034] type=1505 audit(1225539703.253:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4569
[   91.531719] ip_tables: (C) 2000-2006 Netfilter Core Team
[   94.115361] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   94.222380] apm: BIOS not found.
[   94.385588] ppdev: user-space parallel port driver
[   97.484175] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   97.484194] vboxdrv: Successfully done.
[   97.484199] vboxdrv: Found 2 processor cores.
[   97.489639] vboxdrv: fAsync=0 offMin=0x521 offMax=0x3fae
[   97.489663] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   97.489670] vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000).
[   98.972509] tvp5150 0-005c: tvp5150am1 detected.
[  100.518626] Bluetooth: Core ver 2.13
[  100.518794] NET: Registered protocol family 31
[  100.518804] Bluetooth: HCI device and connection manager initialized
[  100.518818] Bluetooth: HCI socket layer initialized
[  100.548636] Bluetooth: L2CAP ver 2.11
[  100.548653] Bluetooth: L2CAP socket layer initialized
[  100.574306] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  100.574322] Bluetooth: BNEP filters: protocol multicast
[  100.637851] Bridge firewalling registered
[  100.639471] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[  100.659114] Bluetooth: RFCOMM socket layer initialized
[  100.659145] Bluetooth: RFCOMM TTY layer initialized
[  100.659151] Bluetooth: RFCOMM ver 1.10
[  100.677557] Bluetooth: SCO (Voice Link) ver 0.6
[  100.677567] Bluetooth: SCO socket layer initialized
[  104.873351] input: b43-phy0 as /devices/virtual/input/input11
[  104.981087] firmware: requesting b43/ucode5.fw
[  105.007333] firmware: requesting b43/pcm5.fw
[  105.016735] firmware: requesting b43/b0g0initvals5.fw
[  105.031227] firmware: requesting b43/b0g0bsinitvals5.fw
[  105.118792] [drm] Initialized drm 1.1.0 20060810
[  105.124775] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  105.124788] pci 0000:00:02.0: setting latency timer to 64
[  105.127075] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  105.184055] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[  105.184069] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
[  105.184076] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[  105.353872] Registered led device: b43-phy0::tx
[  105.357159] Registered led device: b43-phy0::rx
[  105.357604] Registered led device: b43-phy0::radio
[  105.590424] NET: Registered protocol family 17
[  106.245127] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[  106.246944] wlan0: authenticated
[  106.246959] wlan0: associate with AP 00:1e:2a:22:01:b2
[  106.248748] wlan0: RX AssocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1)
[  106.248763] wlan0: associated
[  106.265380] wlan0: disassociating by local choice (reason=3)
[  129.568111] ACPI: EC: missing confirmations, switch off interrupt mode.
[  130.088111] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[  130.088144] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node f7419a20), AE_TIME
[  130.088265] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
[  151.914203] UDF-fs: No VRS found
[  151.928431] ISO 9660 Extensions: Microsoft Joliet Level 3
[  151.929788] ISOFS: changing to secondary root
[  162.184651] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[  162.186383] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[  162.188278] wlan0: authenticated
[  162.188293] wlan0: associate with AP 00:1e:2a:22:01:b2
[  162.190275] wlan0: RX ReassocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1)
[  162.190289] wlan0: associated
[  162.660283] CPU0 attaching NULL sched-domain.
[  162.660301] CPU1 attaching NULL sched-domain.
[  162.679153] CPU0 attaching sched-domain:
[  162.679169]  domain 0: span 0-1 level MC
[  162.679176]   groups: 0 1
[  162.679191] CPU1 attaching sched-domain:
[  162.679197]  domain 0: span 0-1 level MC
[  162.679206]   groups: 1 0
[  227.955183] type=1503 audit(1225539839.908:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6348/net/" pid=6348 profile="/usr/sbin/cupsd"
[  229.009960] type=1503 audit(1225539840.965:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/6353/net/" pid=6353 profile="/usr/sbin/cupsd"
[  229.139126] NET: Registered protocol family 10
[  229.139798] lo: Disabled Privacy Extensions
[  229.141492] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  229.143141] type=1503 audit(1225539841.096:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=6353 profile="/usr/sbin/cupsd"
[  229.143155] type=1503 audit(1225539841.096:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=6353 profile="/usr/sbin/cupsd"
[  229.143163] type=1503 audit(1225539841.096:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=6353 profile="/usr/sbin/cupsd"
[  229.143172] type=1503 audit(1225539841.096:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=6353 profile="/usr/sbin/cupsd"
[  229.143190] type=1503 audit(1225539841.096:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=6353 profile="/usr/sbin/cupsd"
[  229.143198] type=1503 audit(1225539841.096:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=6353 profile="/usr/sbin/cupsd"
[  229.143206] type=1503 audit(1225539841.096:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=6353 profile="/usr/sbin/cupsd"
[  239.184013] wlan0: no IPv6 routers present
[  245.486356] usb 5-5: USB disconnect, address 2
[  245.490906] em28xx #0: disconnecting em28xx #0 video
[  245.490926] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered
[  245.491241] xc2028 0-0061: destroying instance
[  246.524110] usb 5-5: new high speed USB device using ehci_hcd and address 4
[  246.669112] usb 5-5: configuration #1 chosen from 1 choice
[  246.669259] em28xx new video device (0ccd:005e): interface 0, class 255
[  246.669277] em28xx Doesn't have usb audio class
[  246.669283] em28xx #0: Alternate settings: 8
[  246.669288] em28xx #0: Alternate setting 0, max size= 0
[  246.669297] em28xx #0: Alternate setting 1, max size= 0
[  246.669303] em28xx #0: Alternate setting 2, max size= 1448
[  246.669310] em28xx #0: Alternate setting 3, max size= 2048
[  246.669316] em28xx #0: Alternate setting 4, max size= 2304
[  246.669328] em28xx #0: Alternate setting 5, max size= 2580
[  246.669334] em28xx #0: Alternate setting 6, max size= 2892
[  246.669340] em28xx #0: Alternate setting 7, max size= 3072
[  246.669560] em28xx #0: chip ID is em2882/em2883
[  246.835665] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[  246.869926] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
[  246.869962] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[  246.869995] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
[  246.870024] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[  246.870054] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  246.870083] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  246.870113] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[  246.870143] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[  246.870172] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[  246.870203] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
[  246.870232] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[  246.870263] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
[  246.870292] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
[  246.870322] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
[  246.870355] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 30 00 30 00
[  246.870384] em28xx #0: i2c eeprom f0: 31 00 35 00 30 00 33 00 00 00 00 00 00 00 00 00
[  246.870418] EEPROM ID= 0x9567eb1a, hash = 0x3b13b3be
[  246.870423] Vendor/Product ID= 0ccd:005e
[  246.870428] AC97 audio (5 sample rates)
[  246.870433] 500mA max power
[  246.870441] Table at 0x27, strings=0x409e, 0x1cde, 0x346a
[  246.870447] em28xx #0: 
[  246.870449] 
[  246.870456] em28xx #0: The support for this board weren't valid yet.
[  246.870467] em28xx #0: Please send a report of having this working
[  246.870473] em28xx #0: not to V4L mailing list (and/or to other addresses)
[  246.870477] 
[  246.936802] xc2028 0-0061: creating new instance
[  246.936816] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[  246.936833] firmware: requesting xc3028-v27.fw
[  246.941292] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[  247.032631] tvp5150 0-005c: tvp5150am1 detected.
[  247.177315] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[  247.177330] em28xx-audio.c: probing for em28x1 non standard usbaudio
[  247.177337] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[  247.178269] em28xx #0: Found Terratec Hybrid XS (em2882)
[  247.248452] tvp5150 0-005c: tvp5150am1 detected.

Wobei nur der letzte Block interessant zu sein scheint.

Ja...das ist richtig...versuch mal diese Firmware...mal probieren...

cd /lib/firmware

sudo wget http://konstantin.filtschew.de/v4l-firmware/firmware_v2.tgz

sudo tar xzf firmware_v2.tgz

sudo reboot

und dann

dmesg | grep -i dvb

Hi!

[  246.870423] Vendor/Product ID= 0ccd:005e
[  246.870428] AC97 audio (5 sample rates)
[  246.870433] 500mA max power
[  246.870441] Table at 0x27, strings=0x409e, 0x1cde, 0x346a
[  246.870447] em28xx #0: 
[  246.870449] 
[  246.870456] em28xx #0: The support for this board weren't valid yet.
[  246.870467] em28xx #0: Please send a report of having this working
[  246.870473] em28xx #0: not to V4L mailing list (and/or to other addresses)

sowas taucht ja auch in der ersten Ausgabe auf - deine Karte scheint nicht unterstützt zu werden (das english ist ja gruselig...)

Edit: Sehe gerade eishailigas antwort - In dem Firmware-Paket ist aber die vermisste firmware nicht drin...

so long
hank

[    1.204581] pci 0000:00:1c.3:   MEM window: 0xd0000000-0xd00fffff
[    1.204591] pci 0000:00:1c.3:   PREFETCH window: disabled
[    1.204622] pci 0000:06:04.0: CardBus bridge, secondary bus 0000:07
[    1.204629] pci 0000:06:04.0:   IO window: 0x002000-0x0020ff
[    1.204640] pci 0000:06:04.0:   IO window: 0x002400-0x0024ff
[    1.204651] pci 0000:06:04.0:   PREFETCH window: 0x88000000-0x8bffffff
[    1.204663] pci 0000:06:04.0:   MEM window: 0x8c000000-0x8fffffff
[    1.204674] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[    1.204682] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    1.204694] pci 0000:00:1e.0:   MEM window: 0xd0100000-0xd01fffff
[    1.204705] pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x0000008bffffff
[    1.204738] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.204753] pci 0000:00:1c.0: setting latency timer to 64
[    1.204771] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.204782] pci 0000:00:1c.1: setting latency timer to 64
[    1.204801] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.204812] pci 0000:00:1c.2: setting latency timer to 64
[    1.204830] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.204841] pci 0000:00:1c.3: setting latency timer to 64
[    1.204853] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    1.204865] pci 0000:00:1e.0: setting latency timer to 64
[    1.204883] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.204896] bus: 00 index 0 io port: [0, ffff]
[    1.204902] bus: 00 index 1 mmio: [0, ffffffff]
[    1.204908] bus: 02 index 0 mmio: [0, fff]
[    1.204914] bus: 02 index 1 mmio: [0, fffff]
[    1.204919] bus: 02 index 2 mmio: [0, 0]
[    1.204924] bus: 02 index 3 mmio: [0, 0]
[    1.204930] bus: 03 index 0 mmio: [0, 0]
[    1.204935] bus: 03 index 1 mmio: [0, 0]
[    1.204940] bus: 03 index 2 mmio: [0, 0]
[    1.204945] bus: 03 index 3 mmio: [0, 0]
[    1.204950] bus: 04 index 0 mmio: [0, 0]
[    1.204956] bus: 04 index 1 mmio: [0, 0]
[    1.204961] bus: 04 index 2 mmio: [0, 0]
[    1.204966] bus: 04 index 3 mmio: [0, 0]
[    1.204971] bus: 05 index 0 mmio: [0, 0]
[    1.204977] bus: 05 index 1 mmio: [d0000000, d00fffff]
[    1.204983] bus: 05 index 2 mmio: [0, 0]
[    1.204988] bus: 05 index 3 mmio: [0, 0]
[    1.204994] bus: 06 index 0 io port: [2000, 2fff]
[    1.205000] bus: 06 index 1 mmio: [d0100000, d01fffff]
[    1.205006] bus: 06 index 2 mmio: [88000000, 8bffffff]
[    1.205012] bus: 06 index 3 io port: [0, ffff]
[    1.205018] bus: 06 index 4 mmio: [0, ffffffff]
[    1.205024] bus: 07 index 0 io port: [2000, 20ff]
[    1.205030] bus: 07 index 1 io port: [2400, 24ff]
[    1.205036] bus: 07 index 2 mmio: [88000000, 8bffffff]
[    1.205042] bus: 07 index 3 mmio: [8c000000, 8fffffff]
[    1.205064] NET: Registered protocol family 2
[    1.220126] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.220680] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.221605] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.222073] TCP: Hash tables configured (established 131072 bind 65536)
[    1.222082] TCP reno registered
[    1.228185] NET: Registered protocol family 1
[    1.228445] checking if image is initramfs... it is
[    2.964954] Freeing initrd memory: 7931k freed
[    2.965539] Simple Boot Flag at 0x36 set to 0x1
[    2.967611] audit: initializing netlink socket (disabled)
[    2.967651] type=2000 audit(1225542308.965:1): initialized
[    2.983645] highmem bounce pool size: 64 pages
[    2.983660] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.990070] VFS: Disk quotas dquot_6.5.1
[    2.990299] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.990559] msgmni has been set to 1743
[    2.990867] io scheduler noop registered
[    2.990875] io scheduler anticipatory registered
[    2.990881] io scheduler deadline registered
[    2.990913] io scheduler cfq registered (default)
[    2.990940] pci 0000:00:02.0: Boot video device
[    2.991419] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    2.991491] pcieport-driver 0000:00:1c.0: found MSI capability
[    2.991567] pci_express 0000:00:1c.0:pcie00: allocate port service
[    2.991685] pci_express 0000:00:1c.0:pcie02: allocate port service
[    2.991797] pci_express 0000:00:1c.0:pcie03: allocate port service
[    2.992024] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    2.992094] pcieport-driver 0000:00:1c.1: found MSI capability
[    2.992164] pci_express 0000:00:1c.1:pcie00: allocate port service
[    2.992277] pci_express 0000:00:1c.1:pcie02: allocate port service
[    2.992392] pci_express 0000:00:1c.1:pcie03: allocate port service
[    2.992604] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    2.992674] pcieport-driver 0000:00:1c.2: found MSI capability
[    2.992743] pci_express 0000:00:1c.2:pcie00: allocate port service
[    2.992855] pci_express 0000:00:1c.2:pcie02: allocate port service
[    2.992969] pci_express 0000:00:1c.2:pcie03: allocate port service
[    2.993191] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    2.993262] pcieport-driver 0000:00:1c.3: found MSI capability
[    2.993332] pci_express 0000:00:1c.3:pcie00: allocate port service
[    2.993448] pci_express 0000:00:1c.3:pcie02: allocate port service
[    2.993560] pci_express 0000:00:1c.3:pcie03: allocate port service
[    2.994428] isapnp: Scanning for PnP cards...
[    3.981224] isapnp: No Plug & Play device found
[    4.074898] hpet_resources: 0xfed00000 is busy
[    4.075078] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    4.080877] brd: module loaded
[    4.081145] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    4.081463] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    4.082202] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.082303] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.082316] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.082324] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.082331] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.082338] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.083350] mice: PS/2 mouse device common for all mice
[    4.083703] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    4.083748] rtc0: alarms up to one month, y3k, hpet irqs
[    4.084125] EISA: Probing bus 0 at eisa.0
[    4.084137] Cannot allocate resource for EISA slot 1
[    4.084144] Cannot allocate resource for EISA slot 2
[    4.084176] Cannot allocate resource for EISA slot 5
[    4.084201] EISA: Detected 0 cards.
[    4.084208] cpuidle: using governor ladder
[    4.084214] cpuidle: using governor menu
[    4.085527] TCP cubic registered
[    4.085587] Using IPI No-Shortcut mode
[    4.086220] registered taskstats version 1
[    4.086252] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    4.086495]   Magic number: 0:750:429
[    4.086699] rtc_cmos 00:07: setting system clock to 2008-11-01 12:25:11 UTC (1225542311)
[    4.086708] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.086714] EDD information not available.
[    4.087125] Freeing unused kernel memory: 424k freed
[    4.087243] Write protecting the kernel text: 2576k
[    4.087314] Write protecting the kernel read-only data: 936k
[    4.416988] fuse init (API version 7.9)
[    4.498091] ACPI: SSDT 7F685F02, 0238 (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
[    4.499161] ACPI: SSDT 7F6859BB, 04C2 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
[    4.592204] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    4.592356] processor ACPI0007:00: registered as cooling_device0
[    4.592368] ACPI: Processor [CPU0] (supports 8 throttling states)
[    4.593186] ACPI: SSDT 7F68613A, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
[    4.594177] ACPI: SSDT 7F685E7D, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
[    4.596852] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    4.596985] processor ACPI0007:01: registered as cooling_device1
[    4.596997] ACPI: Processor [CPU1] (supports 8 throttling states)
[    4.605027] Marking TSC unstable due to TSC halts in idle
[    4.606461] thermal LNXTHERM:01: registered as thermal_zone0
[    4.616582] ACPI: Thermal Zone [TZ00] (51 C)
[    4.623918] thermal LNXTHERM:02: registered as thermal_zone1
[    4.634560] ACPI: Thermal Zone [TZ01] (51 C)
[    5.438638] usbcore: registered new interface driver usbfs
[    5.438690] usbcore: registered new interface driver hub
[    5.438804] usbcore: registered new device driver usb
[    5.488498] USB Universal Host Controller Interface driver v3.0
[    5.488590] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.488609] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.488617] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.488726] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    5.488792] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[    5.489117] usb usb1: configuration #1 chosen from 1 choice
[    5.489193] hub 1-0:1.0: USB hub found
[    5.489210] hub 1-0:1.0: 2 ports detected
[    5.593541] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.593561] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.593569] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.593630] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    5.593696] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
[    5.593923] usb usb2: configuration #1 chosen from 1 choice
[    5.593996] hub 2-0:1.0: USB hub found
[    5.594012] hub 2-0:1.0: 2 ports detected
[    5.611902] No dock devices found.
[    5.697513] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.697532] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.697541] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.697615] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    5.697681] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
[    5.697927] usb usb3: configuration #1 chosen from 1 choice
[    5.697999] hub 3-0:1.0: USB hub found
[    5.698016] hub 3-0:1.0: 2 ports detected
[    5.701294] SCSI subsystem initialized
[    5.793562] libata version 3.00 loaded.
[    5.905524] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    5.905545] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.905554] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.905619] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    5.905687] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
[    5.905936] usb usb4: configuration #1 chosen from 1 choice
[    5.906007] hub 4-0:1.0: USB hub found
[    5.906025] hub 4-0:1.0: 2 ports detected
[    6.017080] usb 3-1: new full speed USB device using uhci_hcd and address 2
[    6.113895] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    6.113925] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    6.113934] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    6.114001] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    6.117934] ehci_hcd 0000:00:1d.7: debug port 1
[    6.117948] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    6.117966] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000
[    6.141074] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.141379] usb usb5: configuration #1 chosen from 1 choice
[    6.141460] hub 5-0:1.0: USB hub found
[    6.141479] hub 5-0:1.0: 8 ports detected
[    6.349579] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    6.349600] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[    6.409178] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[    6.418112] ata_piix 0000:00:1f.2: version 2.12
[    6.418143] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    6.418153] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    6.537037] usb 3-1: device not accepting address 2, error -71
[    6.572140] ata_piix 0000:00:1f.2: setting latency timer to 64
[    6.572352] scsi0 : ata_piix
[    6.573144] scsi1 : ata_piix
[    6.575876] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5440 irq 14
[    6.575884] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5448 irq 15
[    6.592179] hub 3-0:1.0: unable to enumerate USB device on port 1
[    6.737720] ata1.00: ATA-7: ST9160821AS, 3.ALD, max UDMA/133
[    6.737729] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    6.754406] ata1.00: configured for UDMA/133
[    6.832117] usb 5-5: new high speed USB device using ehci_hcd and address 2
[    6.916602] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33
[    6.932537] ata2.00: configured for UDMA/33
[    6.932801] scsi 0:0:0:0: Direct-Access     ATA      ST9160821AS      3.AL PQ: 0 ANSI: 5
[    6.936473] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WP03 PQ: 0 ANSI: 5
[    6.936760] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    6.936778] b44 0000:06:01.0: setting latency timer to 64
[    6.983511] usb 5-5: configuration #1 chosen from 1 choice
[    6.997157] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
[    6.997343] b44.c:v2.0
[    7.001021] Clocksource tsc unstable (delta = -266733236 ns)
[    7.016676] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    7.016775] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    7.017861] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1b:38:1e:e9:73
[    7.079353] Driver 'sd' needs updating - please use bus_type methods
[    7.079591] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    7.079642] sd 0:0:0:0: [sda] Write Protect is off
[    7.079649] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.079736] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.079908] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    7.079956] sd 0:0:0:0: [sda] Write Protect is off
[    7.079964] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.080092] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.080104]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    7.236451]  sda1 sda2 < sda5 >
[    7.276576] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.280932] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.280942] Uniform CD-ROM driver Revision: 3.20
[    7.281148] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.344066] usb 4-1: new low speed USB device using uhci_hcd and address 2
[    7.519984] usb 4-1: configuration #1 chosen from 1 choice
[    7.565442] usbcore: registered new interface driver hiddev
[    7.580563] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input2
[    7.581204] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1
[    7.581251] usbcore: registered new interface driver usbhid
[    7.581260] usbhid: v2.6:USB HID core driver
[   12.373200] PM: Starting manual resume from disk
[   12.373209] PM: Resume from partition 8:5
[   12.373214] PM: Checking hibernation image.
[   12.373433] PM: Resume from disk failed.
[   12.466089] kjournald starting.  Commit interval 5 seconds
[   12.466134] EXT3-fs: mounted filesystem with ordered data mode.
[   19.628355] udevd version 124 started
[   21.158762] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   21.213360] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   21.325542] iTCO_vendor_support: vendor-support=0
[   21.470528] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   21.470716] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   21.470907] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   21.667057] Linux agpgart interface v0.103
[   21.700338] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[   21.701016] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   21.725148] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   21.788450] intel_rng: FWH not detected
[   21.801008] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   21.828054] ACPI: Power Button (FF) [PWRF]
[   21.828294] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   21.828450] ACPI: Lid Switch [LID]
[   21.828632] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[   21.860046] ACPI: Sleep Button (CM) [SLPB]
[   21.860284] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   21.888044] ACPI: Power Button (CM) [PWRB]
[   22.428155] ACPI: WMI: Mapper loaded
[   22.801260] Yenta: CardBus bridge found at 0000:06:04.0 [1025:0090]
[   22.801299] Yenta: Using CSCINT to route CSC interrupts to PCI
[   22.801305] Yenta: Routing CardBus interrupts to PCI
[   22.801316] Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
[   23.032906] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[   23.032915] Socket status: 30000006
[   23.032923] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   23.032937] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   23.032944] cs: IO port probe 0x2000-0x2fff: clean.
[   23.033467] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[   23.033475] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[   23.158666] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[   23.168057] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   23.168688] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input8
[   23.200045] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   23.239553] ACPI: AC Adapter [ACAD] (on-line)
[   23.313569] sdhci: Secure Digital Host Controller Interface driver
[   23.313577] sdhci: Copyright(c) Pierre Ossman
[   23.355025] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[   23.355050] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
[   23.355065] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   23.355211] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[   23.355234] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[   23.355256] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[   23.355267] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   23.355358] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[   23.636314] ACPI: Battery Slot [BAT1] (battery present)
[   24.069178] ieee80211_crypt: registered algorithm 'NULL'
[   24.073866] wl: module license 'MIXED/Proprietary' taints kernel.
[   24.757918] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[   24.788490] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[   25.088407] input: PC Speaker as /devices/platform/pcspkr/input/input10
[   25.597167] acer-wmi: Acer Laptop ACPI-WMI Extras
[   25.607056] Registered led device: acer-wmi::mail
[   25.810013] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   25.810068] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   25.841240] Linux video capture interface: v2.00
[   25.905207] b43-phy0: Broadcom 4311 WLAN found
[   25.928623] em28xx v4l2 driver version 0.1.0 loaded
[   25.928674] em28xx new video device (0ccd:005e): interface 0, class 255
[   25.928684] em28xx Doesn't have usb audio class
[   25.928690] em28xx #0: Alternate settings: 8
[   25.928696] em28xx #0: Alternate setting 0, max size= 0
[   25.928702] em28xx #0: Alternate setting 1, max size= 0
[   25.928708] em28xx #0: Alternate setting 2, max size= 1448
[   25.928714] em28xx #0: Alternate setting 3, max size= 2048
[   25.928721] em28xx #0: Alternate setting 4, max size= 2304
[   25.928727] em28xx #0: Alternate setting 5, max size= 2580
[   25.928733] em28xx #0: Alternate setting 6, max size= 2892
[   25.928739] em28xx #0: Alternate setting 7, max size= 3072
[   25.929011] em28xx #0: chip ID is em2882/em2883
[   25.973369] phy0: Selected rate control algorithm 'pid'
[   26.119401] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
[   26.119432] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[   26.119460] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
[   26.119489] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[   26.119517] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   26.119550] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   26.119578] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[   26.119606] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[   26.119634] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[   26.119662] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
[   26.119690] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[   26.119718] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
[   26.119746] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
[   26.119774] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
[   26.119803] em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 38 00 30 00 32 00 30 00 30 00
[   26.119831] em28xx #0: i2c eeprom f0: 31 00 35 00 30 00 33 00 00 00 00 00 00 00 00 00
[   26.119862] EEPROM ID= 0x9567eb1a, hash = 0x3b13b3be
[   26.119867] Vendor/Product ID= 0ccd:005e
[   26.119872] AC97 audio (5 sample rates)
[   26.119877] 500mA max power
[   26.119882] Table at 0x27, strings=0x409e, 0x1cde, 0x346a
[   26.119888] em28xx #0: 
[   26.119890] 
[   26.119896] em28xx #0: The support for this board weren't valid yet.
[   26.119903] em28xx #0: Please send a report of having this working
[   26.119909] em28xx #0: not to V4L mailing list (and/or to other addresses)
[   26.119913] 
[   26.247676] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ]
[   26.284638] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[   26.402620] xc2028 0-0061: creating new instance
[   26.402629] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   26.402650] firmware: requesting xc3028-v27.fw
[   27.478287] cs: IO port probe 0x100-0x3af: clean.
[   27.480772] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   27.481836] cs: IO port probe 0x820-0x8ff: clean.
[   27.482702] cs: IO port probe 0xc00-0xcf7: clean.
[   27.484188] cs: IO port probe 0xa00-0xaff: clean.
[   27.681839] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[   27.772601] tvp5150 0-005c: tvp5150am1 detected.
[   27.925201] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[   27.925272] em28xx #0: Found Terratec Hybrid XS (em2882)
[   27.925360] usbcore: registered new interface driver em28xx
[   28.022699] em28xx-audio.c: probing for em28x1 non standard usbaudio
[   28.022707] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[   28.023642] Em28xx: Initialized (Em28xx Audio Extension) extension
[   28.783334] lp: driver loaded but no devices found
[   29.202450] Adding 6048432k swap on /dev/sda5.  Priority:-1 extents:1 across:6048432k
[   29.811356] EXT3 FS on sda1, internal journal
[   31.208693] type=1505 audit(1225542338.873:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4570
[   31.662619] type=1505 audit(1225542339.326:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4575
[   31.663030] type=1505 audit(1225542339.326:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4575
[   31.906605] ip_tables: (C) 2000-2006 Netfilter Core Team
[   34.557062] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   34.663694] apm: BIOS not found.
[   34.828018] ppdev: user-space parallel port driver
[   37.937349] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   37.937368] vboxdrv: Successfully done.
[   37.937374] vboxdrv: Found 2 processor cores.
[   37.943525] vboxdrv: fAsync=0 offMin=0x632 offMax=0x1957
[   37.943550] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   37.943557] vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000).
[   39.488484] tvp5150 0-005c: tvp5150am1 detected.
[   40.616056] Bluetooth: Core ver 2.13
[   40.616231] NET: Registered protocol family 31
[   40.616241] Bluetooth: HCI device and connection manager initialized
[   40.616255] Bluetooth: HCI socket layer initialized
[   40.645595] Bluetooth: L2CAP ver 2.11
[   40.645611] Bluetooth: L2CAP socket layer initialized
[   40.673208] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   40.673227] Bluetooth: BNEP filters: protocol multicast
[   40.753209] Bridge firewalling registered
[   40.768372] Bluetooth: RFCOMM socket layer initialized
[   40.769312] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   40.771291] Bluetooth: RFCOMM TTY layer initialized
[   40.771307] Bluetooth: RFCOMM ver 1.10
[   40.795875] Bluetooth: SCO (Voice Link) ver 0.6
[   40.795894] Bluetooth: SCO socket layer initialized
[   44.097066] [drm] Initialized drm 1.1.0 20060810
[   44.108805] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   44.108828] pci 0000:00:02.0: setting latency timer to 64
[   44.113928] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   44.954417] input: b43-phy0 as /devices/virtual/input/input11
[   45.036128] firmware: requesting b43/ucode5.fw
[   45.060332] firmware: requesting b43/pcm5.fw
[   45.063446] firmware: requesting b43/b0g0initvals5.fw
[   45.069387] firmware: requesting b43/b0g0bsinitvals5.fw
[   45.293054] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
[   45.293067] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
[   45.293072] b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
[   45.474670] Registered led device: b43-phy0::tx
[   45.475831] Registered led device: b43-phy0::rx
[   45.476916] Registered led device: b43-phy0::radio
[   45.621743] NET: Registered protocol family 17
[   46.288229] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[   46.298275] wlan0: authenticated
[   46.298291] wlan0: associate with AP 00:1e:2a:22:01:b2
[   46.307863] wlan0: RX AssocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1)
[   46.307875] wlan0: associated
[   46.308900] wlan0: disassociating by local choice (reason=3)
[   69.937037] ACPI: EC: missing confirmations, switch off interrupt mode.
[   70.456077] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[   70.456099] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node f7419a20), AE_TIME
[   70.456164] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
[   78.219959] UDF-fs: No VRS found
[   78.234428] ISO 9660 Extensions: Microsoft Joliet Level 3
[   78.235778] ISOFS: changing to secondary root
[   87.736222] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[   87.737244] wlan0: authenticate with AP 00:1e:2a:22:01:b2
[   87.738066] wlan0: authenticated
[   87.738081] wlan0: associate with AP 00:1e:2a:22:01:b2
[   87.745579] wlan0: RX ReassocResp from 00:1e:2a:22:01:b2 (capab=0x401 status=0 aid=1)
[   87.745594] wlan0: associated
[   89.455967] CPU0 attaching NULL sched-domain.
[   89.455992] CPU1 attaching NULL sched-domain.
[   89.470379] CPU0 attaching sched-domain:
[   89.470394]  domain 0: span 0-1 level MC
[   89.470402]   groups: 0 1
[   89.470416] CPU1 attaching sched-domain:
[   89.470422]  domain 0: span 0-1 level MC
[   89.470428]   groups: 1 0

Ist die jüngste Ausgabe nach

dmesg | grep -i dvb

und

dmesg

Kaffeine mag noch nich, vll liegts auch da dran